Pagid 355253211 Disc Brake Pad Wear Sensor - Rear
Rear Brake Wear Sensor for BMW
Pagid 355253211 is a rear disc brake pad wear sensor built for BMW applications that use an electronic pad wear warning system. It includes the wiring harness and a male connector, with an overall harness length of 802 mm (31.57 in.) for proper routing at the rear brake position.
Made in Europe Wear Sensor is Pagid’s product line for European vehicle brake monitoring needs, and this sensor is designed for rear disc brake use on a wide range of BMW 2 Series, 3 Series, 4 Series, Z4, i4, and M models. If you are replacing a worn brake warning lead on a BMW 330i, M340i, or Z4, part number 355253211 is the direct reference to check.
Key Features
- Disc brake pad wear sensor for rear brake applications
- Wiring harness included for a complete sensor assembly
- Male connector for OE-style electrical connection
- Harness length: 802 mm / 31.57 in.
- Designed for BMW rear brake wear monitoring systems
- Pagid part number 355253211 for catalog and cross-reference lookup
Detailed Description
This Pagid rear brake pad wear sensor monitors pad wear and sends the warning signal used by the vehicle’s brake service indicator system. It is specified for disc brake setups and matches the rear position across confirmed BMW fitments from 2019 through 2026, including 230i, 330i, 430i, M240i, M340i, M440i, Z4, 330e, and i4 applications. The 355253211 sensor is a practical OE-style replacement when the original wear lead is damaged, broken, or triggering a brake warning message.
This part cross-references Dynamic Friction Company 341-31083 for the same application.
What It Helps Solve
- Brake pad wear warning light staying on after pad service
- Damaged or broken rear brake wear sensor wiring
- Fault codes related to the rear pad wear circuit
- Incorrect or intermittent brake wear signal readings
- Replacement needs after rear brake pad and rotor service
Installation Notes and Tips
Assy/Disassy by qualified personnel required. Verify rear brake routing, connector style, and harness length before installation. Inspect the sensor path for rubbing, heat damage, or pinched wiring, and confirm the connector seats fully at the brake wear circuit connection. After installation, clear any stored brake wear warnings if required by the vehicle.
Compatible With BMW rear brake applications including 2026 230i, 2026 330i, 2025-2026 330i xDrive, 2026 430i, 2026 M240i xDrive, 2025-2026 M340i xDrive, 2026 Z4, 2022-2024 i4, and other confirmed rear-fit BMW models listed for 2019-2026. Use Pagid 355253211 when replacing the rear disc brake pad wear sensor on supported BMW vehicles.
Quality Assurance
Pagid brake components are engineered for European vehicle applications, and this sensor is identified with technical information number P8781. Weight is 0.03 kg, reflecting a compact OE-style sensor assembly for rear brake wear monitoring.
Original: $22.28
-65%$22.28
$7.80Pagid 355253211 Disc Brake Pad Wear Sensor - Rear
Rear Brake Wear Sensor for BMW
Pagid 355253211 is a rear disc brake pad wear sensor built for BMW applications that use an electronic pad wear warning system. It includes the wiring harness and a male connector, with an overall harness length of 802 mm (31.57 in.) for proper routing at the rear brake position.
Made in Europe Wear Sensor is Pagid’s product line for European vehicle brake monitoring needs, and this sensor is designed for rear disc brake use on a wide range of BMW 2 Series, 3 Series, 4 Series, Z4, i4, and M models. If you are replacing a worn brake warning lead on a BMW 330i, M340i, or Z4, part number 355253211 is the direct reference to check.
Key Features
- Disc brake pad wear sensor for rear brake applications
- Wiring harness included for a complete sensor assembly
- Male connector for OE-style electrical connection
- Harness length: 802 mm / 31.57 in.
- Designed for BMW rear brake wear monitoring systems
- Pagid part number 355253211 for catalog and cross-reference lookup
Detailed Description
This Pagid rear brake pad wear sensor monitors pad wear and sends the warning signal used by the vehicle’s brake service indicator system. It is specified for disc brake setups and matches the rear position across confirmed BMW fitments from 2019 through 2026, including 230i, 330i, 430i, M240i, M340i, M440i, Z4, 330e, and i4 applications. The 355253211 sensor is a practical OE-style replacement when the original wear lead is damaged, broken, or triggering a brake warning message.
This part cross-references Dynamic Friction Company 341-31083 for the same application.
What It Helps Solve
- Brake pad wear warning light staying on after pad service
- Damaged or broken rear brake wear sensor wiring
- Fault codes related to the rear pad wear circuit
- Incorrect or intermittent brake wear signal readings
- Replacement needs after rear brake pad and rotor service
Installation Notes and Tips
Assy/Disassy by qualified personnel required. Verify rear brake routing, connector style, and harness length before installation. Inspect the sensor path for rubbing, heat damage, or pinched wiring, and confirm the connector seats fully at the brake wear circuit connection. After installation, clear any stored brake wear warnings if required by the vehicle.
Compatible With BMW rear brake applications including 2026 230i, 2026 330i, 2025-2026 330i xDrive, 2026 430i, 2026 M240i xDrive, 2025-2026 M340i xDrive, 2026 Z4, 2022-2024 i4, and other confirmed rear-fit BMW models listed for 2019-2026. Use Pagid 355253211 when replacing the rear disc brake pad wear sensor on supported BMW vehicles.
Quality Assurance
Pagid brake components are engineered for European vehicle applications, and this sensor is identified with technical information number P8781. Weight is 0.03 kg, reflecting a compact OE-style sensor assembly for rear brake wear monitoring.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Wear Sensor for BMW
Pagid 355253211 is a rear disc brake pad wear sensor built for BMW applications that use an electronic pad wear warning system. It includes the wiring harness and a male connector, with an overall harness length of 802 mm (31.57 in.) for proper routing at the rear brake position.
Made in Europe Wear Sensor is Pagid’s product line for European vehicle brake monitoring needs, and this sensor is designed for rear disc brake use on a wide range of BMW 2 Series, 3 Series, 4 Series, Z4, i4, and M models. If you are replacing a worn brake warning lead on a BMW 330i, M340i, or Z4, part number 355253211 is the direct reference to check.
Key Features
- Disc brake pad wear sensor for rear brake applications
- Wiring harness included for a complete sensor assembly
- Male connector for OE-style electrical connection
- Harness length: 802 mm / 31.57 in.
- Designed for BMW rear brake wear monitoring systems
- Pagid part number 355253211 for catalog and cross-reference lookup
Detailed Description
This Pagid rear brake pad wear sensor monitors pad wear and sends the warning signal used by the vehicle’s brake service indicator system. It is specified for disc brake setups and matches the rear position across confirmed BMW fitments from 2019 through 2026, including 230i, 330i, 430i, M240i, M340i, M440i, Z4, 330e, and i4 applications. The 355253211 sensor is a practical OE-style replacement when the original wear lead is damaged, broken, or triggering a brake warning message.
This part cross-references Dynamic Friction Company 341-31083 for the same application.
What It Helps Solve
- Brake pad wear warning light staying on after pad service
- Damaged or broken rear brake wear sensor wiring
- Fault codes related to the rear pad wear circuit
- Incorrect or intermittent brake wear signal readings
- Replacement needs after rear brake pad and rotor service
Installation Notes and Tips
Assy/Disassy by qualified personnel required. Verify rear brake routing, connector style, and harness length before installation. Inspect the sensor path for rubbing, heat damage, or pinched wiring, and confirm the connector seats fully at the brake wear circuit connection. After installation, clear any stored brake wear warnings if required by the vehicle.
Compatible With BMW rear brake applications including 2026 230i, 2026 330i, 2025-2026 330i xDrive, 2026 430i, 2026 M240i xDrive, 2025-2026 M340i xDrive, 2026 Z4, 2022-2024 i4, and other confirmed rear-fit BMW models listed for 2019-2026. Use Pagid 355253211 when replacing the rear disc brake pad wear sensor on supported BMW vehicles.
Quality Assurance
Pagid brake components are engineered for European vehicle applications, and this sensor is identified with technical information number P8781. Weight is 0.03 kg, reflecting a compact OE-style sensor assembly for rear brake wear monitoring.
