Pioneer Cables DA-2009 Engine Harmonic Balancer
OE Replacement Harmonic Balancer
Pioneer Cables DA-2009 is an OE Replacement Balancer built for Ford and Mercury V8 applications that require a 6.5-inch harmonic balancer with a 3-groove flat belt pulley. It is engineered to match original design dimensions for proper installation and dependable engine operation.
The Pioneer Cables OE Replacement Balancer line focuses on direct-fit service parts for classic Ford and Mercury engines, using OE-style construction and balanced assemblies for consistent performance. Part number DA-2009 follows that approach for restorations and repairs where original fit and function matter.
Key Features
- OE replacement harmonic balancer for classic Ford and Mercury applications
- Inside diameter: 1.375 in. / 35 mm
- Outside diameter: 6.5 in. / 166 mm
- Depth: 3 in. / 76.5 mm
- 3 pulley grooves with flat drive belt type
- 3 mounting holes
- Standard replacement grade
- Precision-machined and dynamically balanced assembly
- Constructed with bonded or pressed high-grade metal and rubber components
Detailed Description
This harmonic balancer is developed to the OE design so it installs properly and functions as intended on supported Ford LTD, Mustang, Bronco, F-100, F-150, F-250, F-350, Thunderbird, and Mercury Grand Marquis, Cougar, Marquis, Montego, and Colony Park applications. The DA-2009 uses original-spec style dimensions and materials to help maintain crankshaft damping performance in engines that rely on a 6.5-inch balancer with a 3-bolt configuration.
This part cross-references Monroe Shocks & Struts (e.g., D2AZ6312B, P-F351C) for the same application.
What It Helps Address
- Crankshaft vibration control issues caused by a worn or deteriorated balancer
- Timing mark visibility problems from an incorrect or damaged harmonic balancer
- Belt alignment concerns on 3-groove flat-belt accessory drives
- Fitment problems when replacing an OE-style balancer on classic Ford and Mercury engines
- Noise or imbalance concerns related to a failing rubber-isolated balancer
Installation Notes and Tips
Verify inside diameter, outside diameter, depth, pulley groove count, and mounting-hole pattern before installation. Confirm vehicle-specific notes such as 1980-1981 Mercury Marquis without EEC and 1981 Mercury Grand Marquis with 6.5-inch outer diameter requirements. Inspect the crank snout, keyway, and pulley alignment during service, and compare the replacement unit to the original balancer before final assembly.
Quality Assurance
Pioneer Cables manufactures this OE Replacement Balancer to original design specifications using precision machining and dynamically balanced assemblies. The bonded metal-and-rubber construction is built to match the intended OE-style fit and operating characteristics for supported Ford and Mercury engine applications.
Original: $137.45
-65%$137.45
$48.11Pioneer Cables DA-2009 Engine Harmonic Balancer
OE Replacement Harmonic Balancer
Pioneer Cables DA-2009 is an OE Replacement Balancer built for Ford and Mercury V8 applications that require a 6.5-inch harmonic balancer with a 3-groove flat belt pulley. It is engineered to match original design dimensions for proper installation and dependable engine operation.
The Pioneer Cables OE Replacement Balancer line focuses on direct-fit service parts for classic Ford and Mercury engines, using OE-style construction and balanced assemblies for consistent performance. Part number DA-2009 follows that approach for restorations and repairs where original fit and function matter.
Key Features
- OE replacement harmonic balancer for classic Ford and Mercury applications
- Inside diameter: 1.375 in. / 35 mm
- Outside diameter: 6.5 in. / 166 mm
- Depth: 3 in. / 76.5 mm
- 3 pulley grooves with flat drive belt type
- 3 mounting holes
- Standard replacement grade
- Precision-machined and dynamically balanced assembly
- Constructed with bonded or pressed high-grade metal and rubber components
Detailed Description
This harmonic balancer is developed to the OE design so it installs properly and functions as intended on supported Ford LTD, Mustang, Bronco, F-100, F-150, F-250, F-350, Thunderbird, and Mercury Grand Marquis, Cougar, Marquis, Montego, and Colony Park applications. The DA-2009 uses original-spec style dimensions and materials to help maintain crankshaft damping performance in engines that rely on a 6.5-inch balancer with a 3-bolt configuration.
This part cross-references Monroe Shocks & Struts (e.g., D2AZ6312B, P-F351C) for the same application.
What It Helps Address
- Crankshaft vibration control issues caused by a worn or deteriorated balancer
- Timing mark visibility problems from an incorrect or damaged harmonic balancer
- Belt alignment concerns on 3-groove flat-belt accessory drives
- Fitment problems when replacing an OE-style balancer on classic Ford and Mercury engines
- Noise or imbalance concerns related to a failing rubber-isolated balancer
Installation Notes and Tips
Verify inside diameter, outside diameter, depth, pulley groove count, and mounting-hole pattern before installation. Confirm vehicle-specific notes such as 1980-1981 Mercury Marquis without EEC and 1981 Mercury Grand Marquis with 6.5-inch outer diameter requirements. Inspect the crank snout, keyway, and pulley alignment during service, and compare the replacement unit to the original balancer before final assembly.
Quality Assurance
Pioneer Cables manufactures this OE Replacement Balancer to original design specifications using precision machining and dynamically balanced assemblies. The bonded metal-and-rubber construction is built to match the intended OE-style fit and operating characteristics for supported Ford and Mercury engine applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Replacement Harmonic Balancer
Pioneer Cables DA-2009 is an OE Replacement Balancer built for Ford and Mercury V8 applications that require a 6.5-inch harmonic balancer with a 3-groove flat belt pulley. It is engineered to match original design dimensions for proper installation and dependable engine operation.
The Pioneer Cables OE Replacement Balancer line focuses on direct-fit service parts for classic Ford and Mercury engines, using OE-style construction and balanced assemblies for consistent performance. Part number DA-2009 follows that approach for restorations and repairs where original fit and function matter.
Key Features
- OE replacement harmonic balancer for classic Ford and Mercury applications
- Inside diameter: 1.375 in. / 35 mm
- Outside diameter: 6.5 in. / 166 mm
- Depth: 3 in. / 76.5 mm
- 3 pulley grooves with flat drive belt type
- 3 mounting holes
- Standard replacement grade
- Precision-machined and dynamically balanced assembly
- Constructed with bonded or pressed high-grade metal and rubber components
Detailed Description
This harmonic balancer is developed to the OE design so it installs properly and functions as intended on supported Ford LTD, Mustang, Bronco, F-100, F-150, F-250, F-350, Thunderbird, and Mercury Grand Marquis, Cougar, Marquis, Montego, and Colony Park applications. The DA-2009 uses original-spec style dimensions and materials to help maintain crankshaft damping performance in engines that rely on a 6.5-inch balancer with a 3-bolt configuration.
This part cross-references Monroe Shocks & Struts (e.g., D2AZ6312B, P-F351C) for the same application.
What It Helps Address
- Crankshaft vibration control issues caused by a worn or deteriorated balancer
- Timing mark visibility problems from an incorrect or damaged harmonic balancer
- Belt alignment concerns on 3-groove flat-belt accessory drives
- Fitment problems when replacing an OE-style balancer on classic Ford and Mercury engines
- Noise or imbalance concerns related to a failing rubber-isolated balancer
Installation Notes and Tips
Verify inside diameter, outside diameter, depth, pulley groove count, and mounting-hole pattern before installation. Confirm vehicle-specific notes such as 1980-1981 Mercury Marquis without EEC and 1981 Mercury Grand Marquis with 6.5-inch outer diameter requirements. Inspect the crank snout, keyway, and pulley alignment during service, and compare the replacement unit to the original balancer before final assembly.
Quality Assurance
Pioneer Cables manufactures this OE Replacement Balancer to original design specifications using precision machining and dynamically balanced assemblies. The bonded metal-and-rubber construction is built to match the intended OE-style fit and operating characteristics for supported Ford and Mercury engine applications.
