Pioneer Cables FRA-595 Automatic Transmission Flexplate
Automatic Transmission Flexplate for GM V8 Applications
Pioneer Cables FRA-595 is an automatic transmission flexplate built for specific GM truck and SUV applications that use an 8-crank-bolt pattern and a 3-bolt converter. With a 12-pitch flywheel design, 139 teeth, and a 0.979-inch diameter, this flexplate supports proper starter engagement and drivetrain alignment in the listed vehicles.
This part cross-references OE part number 12620099 for the same application.
Key Features
- Automatic transmission flexplate for GM rear-wheel-drive applications
- 0.979-inch diameter, 279.4 mm diameter
- 139 teeth for starter ring gear engagement
- 12-pitch flywheel specification
- Fits 8-crank-bolt engines with a 3-bolt converter requirement
- Pioneer Cables FRA-595 replacement part number for catalog matching
Detailed Product Description
The Pioneer Cables FRA-595 flexplate is specified for a range of Cadillac, Chevrolet, and GMC trucks and SUVs from 2014 through 2020. It is listed for the Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Silverado 2500 HD, Tahoe, Suburban 3500 HD, and GMC Sierra 1500, Sierra 1500 Limited, Sierra 2500 HD, Sierra 3500 HD, Yukon, and Yukon XL. For buyers searching for a flexplate for 2014-2020 Chevrolet Silverado 1500 or a replacement automatic transmission flexplate for 2015-2020 GMC Yukon XL, FRA-595 provides a direct catalog match.
Use this flexplate when the application calls for an 8-crank-bolt setup and a 3-bolt converter. The 139-tooth ring gear and 12-pitch flywheel specification are important for correct starter mesh and transmission interface. If you are sourcing a Pioneer Cables FRA-595 flexplate for Cadillac Escalade or Chevrolet Tahoe service, verify the engine and converter configuration against the vehicle listing before installation.
What This Flexplate Helps Address
- Cracked or warped flexplate replacement needs
- Starter engagement issues caused by worn ring gear teeth
- Drivetrain noise related to flexplate damage
- Converter-to-crankshaft interface problems on 8-bolt applications
- Service replacement for listed GM truck and SUV fitments
Installation Notes and Tips
- Confirm the vehicle uses an 8-crank-bolt pattern and a 3-bolt converter before ordering.
- Match the 139-tooth count and 12-pitch flywheel specification to the original part.
- Inspect the starter, converter, and crankshaft flange during installation.
- Follow factory torque procedures and service specifications for the application.
- Verify fitment by year, make, model, and engine configuration on the vehicle.
Quality Assurance
Pioneer Cables FRA-595 is cataloged as a direct replacement flexplate for the listed GM applications and cross-references OE part number 12620099. SFI approval and an SFI certification sticker are not included for this part.
Pioneer Cables FRA-595 Automatic Transmission Flexplate
Automatic Transmission Flexplate for GM V8 Applications
Pioneer Cables FRA-595 is an automatic transmission flexplate built for specific GM truck and SUV applications that use an 8-crank-bolt pattern and a 3-bolt converter. With a 12-pitch flywheel design, 139 teeth, and a 0.979-inch diameter, this flexplate supports proper starter engagement and drivetrain alignment in the listed vehicles.
This part cross-references OE part number 12620099 for the same application.
Key Features
- Automatic transmission flexplate for GM rear-wheel-drive applications
- 0.979-inch diameter, 279.4 mm diameter
- 139 teeth for starter ring gear engagement
- 12-pitch flywheel specification
- Fits 8-crank-bolt engines with a 3-bolt converter requirement
- Pioneer Cables FRA-595 replacement part number for catalog matching
Detailed Product Description
The Pioneer Cables FRA-595 flexplate is specified for a range of Cadillac, Chevrolet, and GMC trucks and SUVs from 2014 through 2020. It is listed for the Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Silverado 2500 HD, Tahoe, Suburban 3500 HD, and GMC Sierra 1500, Sierra 1500 Limited, Sierra 2500 HD, Sierra 3500 HD, Yukon, and Yukon XL. For buyers searching for a flexplate for 2014-2020 Chevrolet Silverado 1500 or a replacement automatic transmission flexplate for 2015-2020 GMC Yukon XL, FRA-595 provides a direct catalog match.
Use this flexplate when the application calls for an 8-crank-bolt setup and a 3-bolt converter. The 139-tooth ring gear and 12-pitch flywheel specification are important for correct starter mesh and transmission interface. If you are sourcing a Pioneer Cables FRA-595 flexplate for Cadillac Escalade or Chevrolet Tahoe service, verify the engine and converter configuration against the vehicle listing before installation.
What This Flexplate Helps Address
- Cracked or warped flexplate replacement needs
- Starter engagement issues caused by worn ring gear teeth
- Drivetrain noise related to flexplate damage
- Converter-to-crankshaft interface problems on 8-bolt applications
- Service replacement for listed GM truck and SUV fitments
Installation Notes and Tips
- Confirm the vehicle uses an 8-crank-bolt pattern and a 3-bolt converter before ordering.
- Match the 139-tooth count and 12-pitch flywheel specification to the original part.
- Inspect the starter, converter, and crankshaft flange during installation.
- Follow factory torque procedures and service specifications for the application.
- Verify fitment by year, make, model, and engine configuration on the vehicle.
Quality Assurance
Pioneer Cables FRA-595 is cataloged as a direct replacement flexplate for the listed GM applications and cross-references OE part number 12620099. SFI approval and an SFI certification sticker are not included for this part.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Automatic Transmission Flexplate for GM V8 Applications
Pioneer Cables FRA-595 is an automatic transmission flexplate built for specific GM truck and SUV applications that use an 8-crank-bolt pattern and a 3-bolt converter. With a 12-pitch flywheel design, 139 teeth, and a 0.979-inch diameter, this flexplate supports proper starter engagement and drivetrain alignment in the listed vehicles.
This part cross-references OE part number 12620099 for the same application.
Key Features
- Automatic transmission flexplate for GM rear-wheel-drive applications
- 0.979-inch diameter, 279.4 mm diameter
- 139 teeth for starter ring gear engagement
- 12-pitch flywheel specification
- Fits 8-crank-bolt engines with a 3-bolt converter requirement
- Pioneer Cables FRA-595 replacement part number for catalog matching
Detailed Product Description
The Pioneer Cables FRA-595 flexplate is specified for a range of Cadillac, Chevrolet, and GMC trucks and SUVs from 2014 through 2020. It is listed for the Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Silverado 2500 HD, Tahoe, Suburban 3500 HD, and GMC Sierra 1500, Sierra 1500 Limited, Sierra 2500 HD, Sierra 3500 HD, Yukon, and Yukon XL. For buyers searching for a flexplate for 2014-2020 Chevrolet Silverado 1500 or a replacement automatic transmission flexplate for 2015-2020 GMC Yukon XL, FRA-595 provides a direct catalog match.
Use this flexplate when the application calls for an 8-crank-bolt setup and a 3-bolt converter. The 139-tooth ring gear and 12-pitch flywheel specification are important for correct starter mesh and transmission interface. If you are sourcing a Pioneer Cables FRA-595 flexplate for Cadillac Escalade or Chevrolet Tahoe service, verify the engine and converter configuration against the vehicle listing before installation.
What This Flexplate Helps Address
- Cracked or warped flexplate replacement needs
- Starter engagement issues caused by worn ring gear teeth
- Drivetrain noise related to flexplate damage
- Converter-to-crankshaft interface problems on 8-bolt applications
- Service replacement for listed GM truck and SUV fitments
Installation Notes and Tips
- Confirm the vehicle uses an 8-crank-bolt pattern and a 3-bolt converter before ordering.
- Match the 139-tooth count and 12-pitch flywheel specification to the original part.
- Inspect the starter, converter, and crankshaft flange during installation.
- Follow factory torque procedures and service specifications for the application.
- Verify fitment by year, make, model, and engine configuration on the vehicle.
Quality Assurance
Pioneer Cables FRA-595 is cataloged as a direct replacement flexplate for the listed GM applications and cross-references OE part number 12620099. SFI approval and an SFI certification sticker are not included for this part.
