PowerStop AD8208P Brake Drum - Front or Rear
OE Replacement Brake Drum for Rear Applications
Power Stop AD8208P is an OE stock replacement coated brake drum built for rear brake service on select Buick, Chevrolet, GMC, Oldsmobile, and Pontiac vehicles. It is manufactured to original equipment specifications for fitment, weight, and performance, with a high-temp coating that helps protect the drum surface from rust and corrosion.
This brake drum is a direct bolt-on replacement for factory equipment and is suited for classic rear drum brake repairs where correct dimensions and OE-style fit are important. Compatible With 1964-1975 rear brake applications across Camaro, Nova, El Camino, Monte Carlo, Firebird, Malibu, Skylark, Omega, and select GMC vans and trucks.
Key Features
- Power Stop OE Stock Replacement Coated Brake Drum
- Part number AD8208P
- Cast iron construction
- Rust resistant coating for added surface protection
- Direct bolt-on replacement for factory drum brake equipment
- Built to original equipment specifications for fitment, weight, and performance
- Rear brake application
- 5-bolt hole design
- Inside diameter: 241.30 mm / 9.50 in
- Maximum brake diameter discard: 243.60 mm / 9.60 in
- Outside diameter: 301.70 mm / 11.90 in
Product Details
Power Stop’s Autospecialty High Temp Coated Brake Drums are made for drivers restoring or maintaining OE-style rear drum brake systems. The cast iron drum provides the structural base expected in factory-style brake service, while the coated exterior helps resist rust and corrosion in everyday use and storage. AD8208P is a practical choice when you need a rear brake drum that matches original equipment dimensions and installation points.
This part cross-references DuraGo BD8798 and Centric Parts 122.62008 for the same application. Search terms such as rear brake drum for 1967-1974 Chevrolet Camaro, rear brake drum for 1969-1974 Chevrolet Nova, and rear brake drum for 1970-1973 Pontiac Firebird align with this fitment.
What It Helps Address
- Rear brake drum wear from normal braking use
- Rust and corrosion on exposed drum surfaces
- Brake pulsation or uneven braking caused by worn drum surfaces
- Loss of OE fitment after drum replacement
- Service needs on classic rear drum brake systems
Installation Notes and Tips
Verify drum diameter, inside diameter, and bolt pattern before installation. This part is listed for rear position only and includes fitments with notes such as round axle cover, H024/H029 RA, and 9-1/2 inch rear brake configurations. Confirm the vehicle’s brake setup against the fitment notes for your exact application before ordering. For best results, inspect shoes, hardware, and related brake components during service.
Quality Assurance
Power Stop manufactures this brake drum to original equipment specifications for fitment, weight, and performance. The high-temp coated finish is used to help protect the drum from rust and corrosion, supporting long-term service in rear brake applications.
PowerStop AD8208P Brake Drum - Front or Rear
OE Replacement Brake Drum for Rear Applications
Power Stop AD8208P is an OE stock replacement coated brake drum built for rear brake service on select Buick, Chevrolet, GMC, Oldsmobile, and Pontiac vehicles. It is manufactured to original equipment specifications for fitment, weight, and performance, with a high-temp coating that helps protect the drum surface from rust and corrosion.
This brake drum is a direct bolt-on replacement for factory equipment and is suited for classic rear drum brake repairs where correct dimensions and OE-style fit are important. Compatible With 1964-1975 rear brake applications across Camaro, Nova, El Camino, Monte Carlo, Firebird, Malibu, Skylark, Omega, and select GMC vans and trucks.
Key Features
- Power Stop OE Stock Replacement Coated Brake Drum
- Part number AD8208P
- Cast iron construction
- Rust resistant coating for added surface protection
- Direct bolt-on replacement for factory drum brake equipment
- Built to original equipment specifications for fitment, weight, and performance
- Rear brake application
- 5-bolt hole design
- Inside diameter: 241.30 mm / 9.50 in
- Maximum brake diameter discard: 243.60 mm / 9.60 in
- Outside diameter: 301.70 mm / 11.90 in
Product Details
Power Stop’s Autospecialty High Temp Coated Brake Drums are made for drivers restoring or maintaining OE-style rear drum brake systems. The cast iron drum provides the structural base expected in factory-style brake service, while the coated exterior helps resist rust and corrosion in everyday use and storage. AD8208P is a practical choice when you need a rear brake drum that matches original equipment dimensions and installation points.
This part cross-references DuraGo BD8798 and Centric Parts 122.62008 for the same application. Search terms such as rear brake drum for 1967-1974 Chevrolet Camaro, rear brake drum for 1969-1974 Chevrolet Nova, and rear brake drum for 1970-1973 Pontiac Firebird align with this fitment.
What It Helps Address
- Rear brake drum wear from normal braking use
- Rust and corrosion on exposed drum surfaces
- Brake pulsation or uneven braking caused by worn drum surfaces
- Loss of OE fitment after drum replacement
- Service needs on classic rear drum brake systems
Installation Notes and Tips
Verify drum diameter, inside diameter, and bolt pattern before installation. This part is listed for rear position only and includes fitments with notes such as round axle cover, H024/H029 RA, and 9-1/2 inch rear brake configurations. Confirm the vehicle’s brake setup against the fitment notes for your exact application before ordering. For best results, inspect shoes, hardware, and related brake components during service.
Quality Assurance
Power Stop manufactures this brake drum to original equipment specifications for fitment, weight, and performance. The high-temp coated finish is used to help protect the drum from rust and corrosion, supporting long-term service in rear brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Replacement Brake Drum for Rear Applications
Power Stop AD8208P is an OE stock replacement coated brake drum built for rear brake service on select Buick, Chevrolet, GMC, Oldsmobile, and Pontiac vehicles. It is manufactured to original equipment specifications for fitment, weight, and performance, with a high-temp coating that helps protect the drum surface from rust and corrosion.
This brake drum is a direct bolt-on replacement for factory equipment and is suited for classic rear drum brake repairs where correct dimensions and OE-style fit are important. Compatible With 1964-1975 rear brake applications across Camaro, Nova, El Camino, Monte Carlo, Firebird, Malibu, Skylark, Omega, and select GMC vans and trucks.
Key Features
- Power Stop OE Stock Replacement Coated Brake Drum
- Part number AD8208P
- Cast iron construction
- Rust resistant coating for added surface protection
- Direct bolt-on replacement for factory drum brake equipment
- Built to original equipment specifications for fitment, weight, and performance
- Rear brake application
- 5-bolt hole design
- Inside diameter: 241.30 mm / 9.50 in
- Maximum brake diameter discard: 243.60 mm / 9.60 in
- Outside diameter: 301.70 mm / 11.90 in
Product Details
Power Stop’s Autospecialty High Temp Coated Brake Drums are made for drivers restoring or maintaining OE-style rear drum brake systems. The cast iron drum provides the structural base expected in factory-style brake service, while the coated exterior helps resist rust and corrosion in everyday use and storage. AD8208P is a practical choice when you need a rear brake drum that matches original equipment dimensions and installation points.
This part cross-references DuraGo BD8798 and Centric Parts 122.62008 for the same application. Search terms such as rear brake drum for 1967-1974 Chevrolet Camaro, rear brake drum for 1969-1974 Chevrolet Nova, and rear brake drum for 1970-1973 Pontiac Firebird align with this fitment.
What It Helps Address
- Rear brake drum wear from normal braking use
- Rust and corrosion on exposed drum surfaces
- Brake pulsation or uneven braking caused by worn drum surfaces
- Loss of OE fitment after drum replacement
- Service needs on classic rear drum brake systems
Installation Notes and Tips
Verify drum diameter, inside diameter, and bolt pattern before installation. This part is listed for rear position only and includes fitments with notes such as round axle cover, H024/H029 RA, and 9-1/2 inch rear brake configurations. Confirm the vehicle’s brake setup against the fitment notes for your exact application before ordering. For best results, inspect shoes, hardware, and related brake components during service.
Quality Assurance
Power Stop manufactures this brake drum to original equipment specifications for fitment, weight, and performance. The high-temp coated finish is used to help protect the drum from rust and corrosion, supporting long-term service in rear brake applications.
