PowerStop AR82113XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop AR82113XPR is a front disc brake rotor set built for the 2006-2013 Chevrolet Corvette. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and better corrosion resistance in demanding driving conditions.
Compatible with Chevrolet Corvette front brake applications, this rotor set follows direct OE fitment for a straightforward replacement on supported models. The Power Stop AR82113XPR is a practical choice for drivers looking for a drilled and slotted front rotor upgrade without special modifications.
Key Features
- Precision cross-drilled surface helps move heat away during repeated braking
- Rounded slots sweep away gas, dust, and moisture from the rotor face
- Silver zinc dichromate plating helps resist rust and surface corrosion
- Direct OE fit for supported front brake applications
- Vented rotor design for improved heat management
- 5-lug mounting pattern with 120.70 mm bolt circle diameter
- Outside diameter: 14.00 in. / 355.00 mm
Detailed Description
Power Stop AR82113XPR is engineered as a front brake rotor replacement for the Chevrolet Corvette, covering 2006-2013 models and 2011-2013 vehicles except those equipped with Ceramic Composite Brakes. The slotted X drilled surface is intended to maintain a cleaner friction contact patch, while the vented construction supports consistent braking performance under higher thermal load. The zinc-plated finish adds a corrosion-resistant layer that helps preserve rotor appearance and service life.
This part cross-references Monroe Shocks & Struts 172286 and 182286 for the same application. For shoppers searching for 2006-2013 Chevrolet Corvette front drilled and slotted brake rotors, AR82113XPR provides a direct-fit replacement option with OE-style dimensions and performance-focused surface treatment.
What This Rotor Set Helps Address
- Brake fade during repeated stops or spirited driving
- Excess heat buildup at the front axle
- Dust, gas, and moisture film on the rotor surface
- Rust and corrosion on exposed rotor surfaces
- Uneven pad contact caused by worn or damaged front rotors
Installation Notes and Tips
Verify front axle fitment before ordering. This rotor set fits 2006-2013 Chevrolet Corvette, front, and 2011-2013 Chevrolet Corvette, front, except Ceramic Composite Brakes. Confirm rotor dimensions, bolt circle diameter, and hub fitment against the original part before installation. Follow factory service procedures for brake inspection, pad condition checks, and proper rotor bedding after installation.
Quality Assurance
Power Stop manufactures this rotor with OE-fit dimensions, vented construction, and a rust-resistant zinc coating to support consistent service performance. The AR82113XPR is built to match the specified front Corvette applications without special modifications.
Original: $452.18
-65%$452.18
$158.26PowerStop AR82113XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop AR82113XPR is a front disc brake rotor set built for the 2006-2013 Chevrolet Corvette. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and better corrosion resistance in demanding driving conditions.
Compatible with Chevrolet Corvette front brake applications, this rotor set follows direct OE fitment for a straightforward replacement on supported models. The Power Stop AR82113XPR is a practical choice for drivers looking for a drilled and slotted front rotor upgrade without special modifications.
Key Features
- Precision cross-drilled surface helps move heat away during repeated braking
- Rounded slots sweep away gas, dust, and moisture from the rotor face
- Silver zinc dichromate plating helps resist rust and surface corrosion
- Direct OE fit for supported front brake applications
- Vented rotor design for improved heat management
- 5-lug mounting pattern with 120.70 mm bolt circle diameter
- Outside diameter: 14.00 in. / 355.00 mm
Detailed Description
Power Stop AR82113XPR is engineered as a front brake rotor replacement for the Chevrolet Corvette, covering 2006-2013 models and 2011-2013 vehicles except those equipped with Ceramic Composite Brakes. The slotted X drilled surface is intended to maintain a cleaner friction contact patch, while the vented construction supports consistent braking performance under higher thermal load. The zinc-plated finish adds a corrosion-resistant layer that helps preserve rotor appearance and service life.
This part cross-references Monroe Shocks & Struts 172286 and 182286 for the same application. For shoppers searching for 2006-2013 Chevrolet Corvette front drilled and slotted brake rotors, AR82113XPR provides a direct-fit replacement option with OE-style dimensions and performance-focused surface treatment.
What This Rotor Set Helps Address
- Brake fade during repeated stops or spirited driving
- Excess heat buildup at the front axle
- Dust, gas, and moisture film on the rotor surface
- Rust and corrosion on exposed rotor surfaces
- Uneven pad contact caused by worn or damaged front rotors
Installation Notes and Tips
Verify front axle fitment before ordering. This rotor set fits 2006-2013 Chevrolet Corvette, front, and 2011-2013 Chevrolet Corvette, front, except Ceramic Composite Brakes. Confirm rotor dimensions, bolt circle diameter, and hub fitment against the original part before installation. Follow factory service procedures for brake inspection, pad condition checks, and proper rotor bedding after installation.
Quality Assurance
Power Stop manufactures this rotor with OE-fit dimensions, vented construction, and a rust-resistant zinc coating to support consistent service performance. The AR82113XPR is built to match the specified front Corvette applications without special modifications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Rotor Upgrade
PowerStop AR82113XPR is a front disc brake rotor set built for the 2006-2013 Chevrolet Corvette. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and better corrosion resistance in demanding driving conditions.
Compatible with Chevrolet Corvette front brake applications, this rotor set follows direct OE fitment for a straightforward replacement on supported models. The Power Stop AR82113XPR is a practical choice for drivers looking for a drilled and slotted front rotor upgrade without special modifications.
Key Features
- Precision cross-drilled surface helps move heat away during repeated braking
- Rounded slots sweep away gas, dust, and moisture from the rotor face
- Silver zinc dichromate plating helps resist rust and surface corrosion
- Direct OE fit for supported front brake applications
- Vented rotor design for improved heat management
- 5-lug mounting pattern with 120.70 mm bolt circle diameter
- Outside diameter: 14.00 in. / 355.00 mm
Detailed Description
Power Stop AR82113XPR is engineered as a front brake rotor replacement for the Chevrolet Corvette, covering 2006-2013 models and 2011-2013 vehicles except those equipped with Ceramic Composite Brakes. The slotted X drilled surface is intended to maintain a cleaner friction contact patch, while the vented construction supports consistent braking performance under higher thermal load. The zinc-plated finish adds a corrosion-resistant layer that helps preserve rotor appearance and service life.
This part cross-references Monroe Shocks & Struts 172286 and 182286 for the same application. For shoppers searching for 2006-2013 Chevrolet Corvette front drilled and slotted brake rotors, AR82113XPR provides a direct-fit replacement option with OE-style dimensions and performance-focused surface treatment.
What This Rotor Set Helps Address
- Brake fade during repeated stops or spirited driving
- Excess heat buildup at the front axle
- Dust, gas, and moisture film on the rotor surface
- Rust and corrosion on exposed rotor surfaces
- Uneven pad contact caused by worn or damaged front rotors
Installation Notes and Tips
Verify front axle fitment before ordering. This rotor set fits 2006-2013 Chevrolet Corvette, front, and 2011-2013 Chevrolet Corvette, front, except Ceramic Composite Brakes. Confirm rotor dimensions, bolt circle diameter, and hub fitment against the original part before installation. Follow factory service procedures for brake inspection, pad condition checks, and proper rotor bedding after installation.
Quality Assurance
Power Stop manufactures this rotor with OE-fit dimensions, vented construction, and a rust-resistant zinc coating to support consistent service performance. The AR82113XPR is built to match the specified front Corvette applications without special modifications.
