PowerStop AR82181XPR Disc Brake Rotor Set - Front
Front Brake Rotor Upgrade for Trax
PowerStop AR82181XPR is a front disc brake rotor set for 2013-2017 Chevrolet Trax applications. It combines drilled and slotted rotor surfaces with a zinc dichromate coating to support cooler braking, cleaner pad contact, and corrosion resistance in everyday driving and demanding stops.
Built as a direct OE-fit replacement, this rotor set is a practical choice for Chevrolet Trax owners looking for a front brake rotor upgrade without special modifications.
Key Features
- Fits 2013-2017 Chevrolet Trax, front
- Power Stop AR82181XPR front drilled, slotted and zinc plated brake rotor pair
- Cross-drilled surface helps move heat away during repeated braking
- Rounded slots clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the front axle
- Vented rotor design with 11.80 in. outside diameter
- 5-lug mounting pattern with 105.00 mm bolt circle diameter
Product Details
Power Stop’s drilled and slotted rotor line focuses on brake cooling and consistent surface contact. On the Chevrolet Trax, AR82181XPR uses a vented, slotted X drilled design to help manage heat buildup and keep the pad-to-rotor interface cleaner under stop-and-go traffic, highway braking, and repeated deceleration. The zinc plated finish adds a layer of protection against rust, which is especially helpful in wet or salted-road conditions.
This part cross-references Raybestos Brakes 581034 for the same application. It also matches OE-style replacement needs for the 2013-2017 Chevrolet Trax front brake position, and the part number AR82181XPR is the identifier to verify before ordering.
Common Brake Issues It May Address
- Brake fade during repeated front braking
- Heat buildup in daily driving or heavier stop-and-go use
- Surface rust on exposed rotor faces
- Dust, gas, and moisture buildup between pad and rotor
- Pulsation or uneven braking caused by worn front rotors
Installation Notes
Compatible With 2013-2017 Chevrolet Trax front brake applications. Confirm rotor dimensions before installation, including 11.80 in. outside diameter, 23.00 mm nominal thickness, 23.00 mm discard thickness, 45.70 mm overall height, 105.00 mm bolt circle diameter, and 5 lug holes. The direct OE fit helps simplify replacement, but brake pads, caliper condition, and hub surface cleanliness should be checked during service.
Quality Assurance
PowerStop manufactures this rotor set as a direct-fit replacement with a corrosion-resistant zinc coating and a vented drilled-and-slotted design for consistent front brake performance on the Chevrolet Trax. Part number AR82181XPR is built to OE-style fitment standards for the listed vehicle application.
Original: $274.35
-65%$274.35
$96.02PowerStop AR82181XPR Disc Brake Rotor Set - Front
Front Brake Rotor Upgrade for Trax
PowerStop AR82181XPR is a front disc brake rotor set for 2013-2017 Chevrolet Trax applications. It combines drilled and slotted rotor surfaces with a zinc dichromate coating to support cooler braking, cleaner pad contact, and corrosion resistance in everyday driving and demanding stops.
Built as a direct OE-fit replacement, this rotor set is a practical choice for Chevrolet Trax owners looking for a front brake rotor upgrade without special modifications.
Key Features
- Fits 2013-2017 Chevrolet Trax, front
- Power Stop AR82181XPR front drilled, slotted and zinc plated brake rotor pair
- Cross-drilled surface helps move heat away during repeated braking
- Rounded slots clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the front axle
- Vented rotor design with 11.80 in. outside diameter
- 5-lug mounting pattern with 105.00 mm bolt circle diameter
Product Details
Power Stop’s drilled and slotted rotor line focuses on brake cooling and consistent surface contact. On the Chevrolet Trax, AR82181XPR uses a vented, slotted X drilled design to help manage heat buildup and keep the pad-to-rotor interface cleaner under stop-and-go traffic, highway braking, and repeated deceleration. The zinc plated finish adds a layer of protection against rust, which is especially helpful in wet or salted-road conditions.
This part cross-references Raybestos Brakes 581034 for the same application. It also matches OE-style replacement needs for the 2013-2017 Chevrolet Trax front brake position, and the part number AR82181XPR is the identifier to verify before ordering.
Common Brake Issues It May Address
- Brake fade during repeated front braking
- Heat buildup in daily driving or heavier stop-and-go use
- Surface rust on exposed rotor faces
- Dust, gas, and moisture buildup between pad and rotor
- Pulsation or uneven braking caused by worn front rotors
Installation Notes
Compatible With 2013-2017 Chevrolet Trax front brake applications. Confirm rotor dimensions before installation, including 11.80 in. outside diameter, 23.00 mm nominal thickness, 23.00 mm discard thickness, 45.70 mm overall height, 105.00 mm bolt circle diameter, and 5 lug holes. The direct OE fit helps simplify replacement, but brake pads, caliper condition, and hub surface cleanliness should be checked during service.
Quality Assurance
PowerStop manufactures this rotor set as a direct-fit replacement with a corrosion-resistant zinc coating and a vented drilled-and-slotted design for consistent front brake performance on the Chevrolet Trax. Part number AR82181XPR is built to OE-style fitment standards for the listed vehicle application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Rotor Upgrade for Trax
PowerStop AR82181XPR is a front disc brake rotor set for 2013-2017 Chevrolet Trax applications. It combines drilled and slotted rotor surfaces with a zinc dichromate coating to support cooler braking, cleaner pad contact, and corrosion resistance in everyday driving and demanding stops.
Built as a direct OE-fit replacement, this rotor set is a practical choice for Chevrolet Trax owners looking for a front brake rotor upgrade without special modifications.
Key Features
- Fits 2013-2017 Chevrolet Trax, front
- Power Stop AR82181XPR front drilled, slotted and zinc plated brake rotor pair
- Cross-drilled surface helps move heat away during repeated braking
- Rounded slots clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the front axle
- Vented rotor design with 11.80 in. outside diameter
- 5-lug mounting pattern with 105.00 mm bolt circle diameter
Product Details
Power Stop’s drilled and slotted rotor line focuses on brake cooling and consistent surface contact. On the Chevrolet Trax, AR82181XPR uses a vented, slotted X drilled design to help manage heat buildup and keep the pad-to-rotor interface cleaner under stop-and-go traffic, highway braking, and repeated deceleration. The zinc plated finish adds a layer of protection against rust, which is especially helpful in wet or salted-road conditions.
This part cross-references Raybestos Brakes 581034 for the same application. It also matches OE-style replacement needs for the 2013-2017 Chevrolet Trax front brake position, and the part number AR82181XPR is the identifier to verify before ordering.
Common Brake Issues It May Address
- Brake fade during repeated front braking
- Heat buildup in daily driving or heavier stop-and-go use
- Surface rust on exposed rotor faces
- Dust, gas, and moisture buildup between pad and rotor
- Pulsation or uneven braking caused by worn front rotors
Installation Notes
Compatible With 2013-2017 Chevrolet Trax front brake applications. Confirm rotor dimensions before installation, including 11.80 in. outside diameter, 23.00 mm nominal thickness, 23.00 mm discard thickness, 45.70 mm overall height, 105.00 mm bolt circle diameter, and 5 lug holes. The direct OE fit helps simplify replacement, but brake pads, caliper condition, and hub surface cleanliness should be checked during service.
Quality Assurance
PowerStop manufactures this rotor set as a direct-fit replacement with a corrosion-resistant zinc coating and a vented drilled-and-slotted design for consistent front brake performance on the Chevrolet Trax. Part number AR82181XPR is built to OE-style fitment standards for the listed vehicle application.
