PowerStop AR83073XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop AR83073XPR is a front disc brake rotor set built for drivers who want a direct OE-fit replacement with added cooling and surface cleaning features. It fits 2013-2014 Chrysler 200 front, 2013-2014 Dodge Avenger front, and 2008-2009 Dodge Caliber front.
For shoppers searching for a 2013-2014 Chrysler 200 front brake rotor upgrade or a 2008-2009 Dodge Caliber front drilled and slotted rotor replacement, this part number delivers a straightforward bolt-on solution. The Power Stop AR83073XPR rotor pair is also a fitment match for 2013-2014 Dodge Avenger front applications.
Key Features
- Precision cross-drilled surface helps move heat away during repeated braking
- Rounded slots clear dust, gases, and moisture from the rotor face
- Silver zinc dichromate plating resists rust and corrosion
- Vented rotor design supports heat management in front brake use
- Direct OE fit for straightforward replacement on listed vehicles
- 5-lug, 114.30 mm bolt circle fitment
- 340 mm outside diameter on listed 340 mm front applications
Product Details
Power Stop’s drilled and slotted rotor line focuses on brake cooling, consistent friction contact, and corrosion resistance. On this AR83073XPR application, the slotted X drilled surface and vented construction help maintain a cleaner rotor face under stop-and-go driving, highway braking, and repeated heat cycles. The zinc-plated finish adds protection against rust, which is especially useful for vehicles exposed to wet roads or winter conditions.
Fitment is direct for the listed Chrysler 200, Dodge Avenger, and Dodge Caliber front positions, so no special modifications are required when the vehicle matches the catalog data. This makes AR83073XPR a practical OE-style rotor replacement for drivers looking for a performance-oriented front brake rotor without changing the factory brake layout.
This part cross-references Centric Parts 120.63072 for the same application.
What This Rotor Can Help Address
- Brake fade during repeated stops or higher-temperature driving
- Surface buildup from dust, gas, and moisture on the rotor face
- Rust and corrosion on exposed brake rotor surfaces
- Pulsation or uneven braking caused by worn front rotors
- Loss of braking consistency on listed Chrysler, Dodge applications
Installation Notes
Confirm rotor diameter, bolt pattern, and front-position fitment before installation. This rotor is listed for 340 mm front applications on the Chrysler 200 and Dodge Avenger, and for the front position on the Dodge Caliber. Match the vehicle year, make, model, and brake configuration to the catalog data before ordering. Professional installation and proper brake service procedures are recommended for best results.
Quality Assurance
PowerStop AR83073XPR is built as a direct-fit replacement rotor with a corrosion-resistant plated finish and OE-style dimensions for the listed vehicles. The design follows Power Stop’s drilled and slotted rotor construction approach for consistent fitment and brake performance support.
PowerStop AR83073XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop AR83073XPR is a front disc brake rotor set built for drivers who want a direct OE-fit replacement with added cooling and surface cleaning features. It fits 2013-2014 Chrysler 200 front, 2013-2014 Dodge Avenger front, and 2008-2009 Dodge Caliber front.
For shoppers searching for a 2013-2014 Chrysler 200 front brake rotor upgrade or a 2008-2009 Dodge Caliber front drilled and slotted rotor replacement, this part number delivers a straightforward bolt-on solution. The Power Stop AR83073XPR rotor pair is also a fitment match for 2013-2014 Dodge Avenger front applications.
Key Features
- Precision cross-drilled surface helps move heat away during repeated braking
- Rounded slots clear dust, gases, and moisture from the rotor face
- Silver zinc dichromate plating resists rust and corrosion
- Vented rotor design supports heat management in front brake use
- Direct OE fit for straightforward replacement on listed vehicles
- 5-lug, 114.30 mm bolt circle fitment
- 340 mm outside diameter on listed 340 mm front applications
Product Details
Power Stop’s drilled and slotted rotor line focuses on brake cooling, consistent friction contact, and corrosion resistance. On this AR83073XPR application, the slotted X drilled surface and vented construction help maintain a cleaner rotor face under stop-and-go driving, highway braking, and repeated heat cycles. The zinc-plated finish adds protection against rust, which is especially useful for vehicles exposed to wet roads or winter conditions.
Fitment is direct for the listed Chrysler 200, Dodge Avenger, and Dodge Caliber front positions, so no special modifications are required when the vehicle matches the catalog data. This makes AR83073XPR a practical OE-style rotor replacement for drivers looking for a performance-oriented front brake rotor without changing the factory brake layout.
This part cross-references Centric Parts 120.63072 for the same application.
What This Rotor Can Help Address
- Brake fade during repeated stops or higher-temperature driving
- Surface buildup from dust, gas, and moisture on the rotor face
- Rust and corrosion on exposed brake rotor surfaces
- Pulsation or uneven braking caused by worn front rotors
- Loss of braking consistency on listed Chrysler, Dodge applications
Installation Notes
Confirm rotor diameter, bolt pattern, and front-position fitment before installation. This rotor is listed for 340 mm front applications on the Chrysler 200 and Dodge Avenger, and for the front position on the Dodge Caliber. Match the vehicle year, make, model, and brake configuration to the catalog data before ordering. Professional installation and proper brake service procedures are recommended for best results.
Quality Assurance
PowerStop AR83073XPR is built as a direct-fit replacement rotor with a corrosion-resistant plated finish and OE-style dimensions for the listed vehicles. The design follows Power Stop’s drilled and slotted rotor construction approach for consistent fitment and brake performance support.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Rotor Upgrade
PowerStop AR83073XPR is a front disc brake rotor set built for drivers who want a direct OE-fit replacement with added cooling and surface cleaning features. It fits 2013-2014 Chrysler 200 front, 2013-2014 Dodge Avenger front, and 2008-2009 Dodge Caliber front.
For shoppers searching for a 2013-2014 Chrysler 200 front brake rotor upgrade or a 2008-2009 Dodge Caliber front drilled and slotted rotor replacement, this part number delivers a straightforward bolt-on solution. The Power Stop AR83073XPR rotor pair is also a fitment match for 2013-2014 Dodge Avenger front applications.
Key Features
- Precision cross-drilled surface helps move heat away during repeated braking
- Rounded slots clear dust, gases, and moisture from the rotor face
- Silver zinc dichromate plating resists rust and corrosion
- Vented rotor design supports heat management in front brake use
- Direct OE fit for straightforward replacement on listed vehicles
- 5-lug, 114.30 mm bolt circle fitment
- 340 mm outside diameter on listed 340 mm front applications
Product Details
Power Stop’s drilled and slotted rotor line focuses on brake cooling, consistent friction contact, and corrosion resistance. On this AR83073XPR application, the slotted X drilled surface and vented construction help maintain a cleaner rotor face under stop-and-go driving, highway braking, and repeated heat cycles. The zinc-plated finish adds protection against rust, which is especially useful for vehicles exposed to wet roads or winter conditions.
Fitment is direct for the listed Chrysler 200, Dodge Avenger, and Dodge Caliber front positions, so no special modifications are required when the vehicle matches the catalog data. This makes AR83073XPR a practical OE-style rotor replacement for drivers looking for a performance-oriented front brake rotor without changing the factory brake layout.
This part cross-references Centric Parts 120.63072 for the same application.
What This Rotor Can Help Address
- Brake fade during repeated stops or higher-temperature driving
- Surface buildup from dust, gas, and moisture on the rotor face
- Rust and corrosion on exposed brake rotor surfaces
- Pulsation or uneven braking caused by worn front rotors
- Loss of braking consistency on listed Chrysler, Dodge applications
Installation Notes
Confirm rotor diameter, bolt pattern, and front-position fitment before installation. This rotor is listed for 340 mm front applications on the Chrysler 200 and Dodge Avenger, and for the front position on the Dodge Caliber. Match the vehicle year, make, model, and brake configuration to the catalog data before ordering. Professional installation and proper brake service procedures are recommended for best results.
Quality Assurance
PowerStop AR83073XPR is built as a direct-fit replacement rotor with a corrosion-resistant plated finish and OE-style dimensions for the listed vehicles. The design follows Power Stop’s drilled and slotted rotor construction approach for consistent fitment and brake performance support.
