PowerStop AR8564EVC Disc Brake Rotor - Rear
Power Stop Rear Geomet Coated Rotor Overview
The Power Stop Evolution Coated rear disc brake rotor is a direct bolt-on replacement for factory equipment, built to OE specifications for fitment, weight, vane count, and braking performance. This rear rotor uses a Genuine GEOMET rust preventative coating to help resist corrosion while maintaining normal brake function.
For drivers searching for a rear brake rotor for Ford F-150, Ford Expedition, or Lincoln Navigator applications, the AR8564EVC offers an OE-style replacement with a coated finish for added protection in everyday driving conditions.
Key Features
- Rear disc brake rotor with Genuine GEOMET 360 coating for rust and corrosion resistance
- Direct bolt-on replacement for factory equipment
- Manufactured to original equipment specifications for fitment, weight, vane count, and performance
- Vented rotor design for rear brake applications
- 12.90 in. outside diameter with 8 lug holes and a 5.70 in. bolt circle diameter
- Part number AR8564EVC for catalog and fitment verification
Product Details
Power Stop’s Evolution Coated rotor line focuses on OE-style replacement parts with a protective coated surface. The AR8564EVC is engineered as a rear brake rotor that matches factory dimensions and mounting geometry, making it a practical choice for brake service on Ford F-150, Ford Expedition, and Lincoln Navigator platforms where the correct rear rotor size and bolt pattern are required. The vented construction supports consistent brake operation, while the coated finish helps slow the formation of rust on exposed surfaces.
This part cross-references Ford OE number F6UZ 2C026-AA for the same application.
Common Issues This Rotor Can Address
- Rear rotor rust on exposed braking surfaces
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from rotor wear
- Noise related to deteriorated rear rotors
- Service replacement needs for OE-size rear brake components
Installation Notes and Tips
Verify rotor diameter, bolt circle diameter, lug count, and overall height before installation. This rear rotor is intended for vehicles that use an 8-lug, vented rear brake rotor with the listed OE dimensions. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during brake service to help ensure proper rotor seating and even braking.
For fitment-based searches, this part is commonly referenced as a rear brake rotor for Ford F-150, Ford Expedition, and Lincoln Navigator applications. Use part number AR8564EVC to confirm the correct OE-style replacement before ordering.
Quality Assurance
Power Stop manufactures the Evolution Coated rotor line to original equipment specifications and applies a Genuine GEOMET rust preventative coating to protect the rotor surface from corrosion without affecting braking performance.
PowerStop AR8564EVC Disc Brake Rotor - Rear
Power Stop Rear Geomet Coated Rotor Overview
The Power Stop Evolution Coated rear disc brake rotor is a direct bolt-on replacement for factory equipment, built to OE specifications for fitment, weight, vane count, and braking performance. This rear rotor uses a Genuine GEOMET rust preventative coating to help resist corrosion while maintaining normal brake function.
For drivers searching for a rear brake rotor for Ford F-150, Ford Expedition, or Lincoln Navigator applications, the AR8564EVC offers an OE-style replacement with a coated finish for added protection in everyday driving conditions.
Key Features
- Rear disc brake rotor with Genuine GEOMET 360 coating for rust and corrosion resistance
- Direct bolt-on replacement for factory equipment
- Manufactured to original equipment specifications for fitment, weight, vane count, and performance
- Vented rotor design for rear brake applications
- 12.90 in. outside diameter with 8 lug holes and a 5.70 in. bolt circle diameter
- Part number AR8564EVC for catalog and fitment verification
Product Details
Power Stop’s Evolution Coated rotor line focuses on OE-style replacement parts with a protective coated surface. The AR8564EVC is engineered as a rear brake rotor that matches factory dimensions and mounting geometry, making it a practical choice for brake service on Ford F-150, Ford Expedition, and Lincoln Navigator platforms where the correct rear rotor size and bolt pattern are required. The vented construction supports consistent brake operation, while the coated finish helps slow the formation of rust on exposed surfaces.
This part cross-references Ford OE number F6UZ 2C026-AA for the same application.
Common Issues This Rotor Can Address
- Rear rotor rust on exposed braking surfaces
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from rotor wear
- Noise related to deteriorated rear rotors
- Service replacement needs for OE-size rear brake components
Installation Notes and Tips
Verify rotor diameter, bolt circle diameter, lug count, and overall height before installation. This rear rotor is intended for vehicles that use an 8-lug, vented rear brake rotor with the listed OE dimensions. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during brake service to help ensure proper rotor seating and even braking.
For fitment-based searches, this part is commonly referenced as a rear brake rotor for Ford F-150, Ford Expedition, and Lincoln Navigator applications. Use part number AR8564EVC to confirm the correct OE-style replacement before ordering.
Quality Assurance
Power Stop manufactures the Evolution Coated rotor line to original equipment specifications and applies a Genuine GEOMET rust preventative coating to protect the rotor surface from corrosion without affecting braking performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Power Stop Rear Geomet Coated Rotor Overview
The Power Stop Evolution Coated rear disc brake rotor is a direct bolt-on replacement for factory equipment, built to OE specifications for fitment, weight, vane count, and braking performance. This rear rotor uses a Genuine GEOMET rust preventative coating to help resist corrosion while maintaining normal brake function.
For drivers searching for a rear brake rotor for Ford F-150, Ford Expedition, or Lincoln Navigator applications, the AR8564EVC offers an OE-style replacement with a coated finish for added protection in everyday driving conditions.
Key Features
- Rear disc brake rotor with Genuine GEOMET 360 coating for rust and corrosion resistance
- Direct bolt-on replacement for factory equipment
- Manufactured to original equipment specifications for fitment, weight, vane count, and performance
- Vented rotor design for rear brake applications
- 12.90 in. outside diameter with 8 lug holes and a 5.70 in. bolt circle diameter
- Part number AR8564EVC for catalog and fitment verification
Product Details
Power Stop’s Evolution Coated rotor line focuses on OE-style replacement parts with a protective coated surface. The AR8564EVC is engineered as a rear brake rotor that matches factory dimensions and mounting geometry, making it a practical choice for brake service on Ford F-150, Ford Expedition, and Lincoln Navigator platforms where the correct rear rotor size and bolt pattern are required. The vented construction supports consistent brake operation, while the coated finish helps slow the formation of rust on exposed surfaces.
This part cross-references Ford OE number F6UZ 2C026-AA for the same application.
Common Issues This Rotor Can Address
- Rear rotor rust on exposed braking surfaces
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from rotor wear
- Noise related to deteriorated rear rotors
- Service replacement needs for OE-size rear brake components
Installation Notes and Tips
Verify rotor diameter, bolt circle diameter, lug count, and overall height before installation. This rear rotor is intended for vehicles that use an 8-lug, vented rear brake rotor with the listed OE dimensions. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during brake service to help ensure proper rotor seating and even braking.
For fitment-based searches, this part is commonly referenced as a rear brake rotor for Ford F-150, Ford Expedition, and Lincoln Navigator applications. Use part number AR8564EVC to confirm the correct OE-style replacement before ordering.
Quality Assurance
Power Stop manufactures the Evolution Coated rotor line to original equipment specifications and applies a Genuine GEOMET rust preventative coating to protect the rotor surface from corrosion without affecting braking performance.
