PowerStop AR8728XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Brake Rotors
PowerStop AR8728XPR is a front brake rotor set built for 1994-1999 Dodge Ram 1500 applications. These vented, drilled, and slotted rotors are a direct OE-fit upgrade for drivers looking to improve brake cooling, surface cleaning, and corrosion resistance without special modifications.
The Power Stop rotor line focuses on practical braking performance for street and demanding use. On this application, the cross-drilled face helps move heat away from the braking surface, while the rounded slots clear gas, dust, and moisture to maintain consistent pad contact. Silver zinc dichromate plating adds rust resistance for long-term appearance and protection.
- Fits 1994-1999 Dodge Ram 1500, front
- Surface type: slotted and drilled for improved rotor cleaning
- Vented rotor design for heat management
- Silver zinc dichromate coating for rust and corrosion resistance
- Direct OE fit with no special modifications needed
- Outside diameter: 11.60 in. / 294.90 mm
- Nominal thickness: 1.28 in. / 32.50 mm
- Discard thickness: 1.21 in. / 30.70 mm
- Overall height: 4.50 in. / 114.60 mm
- 5-lug mounting pattern with 5.50 in. bolt circle diameter
Detailed Application Overview
PowerStop AR8728XPR is intended for front brake service on the Dodge Ram 1500 from 1994 through 1999. The drilled and slotted rotor face helps maintain a cleaner friction surface under repeated stops, while the vented construction supports cooling during heavier braking. For Ram 1500 owners searching for a front drilled and slotted brake rotor pair, AR8728XPR provides an OE-style replacement with upgraded surface treatment and performance-oriented rotor geometry.
This part cross-references PowerStop AR8728XPR for the same application.
What This Rotor Set Helps Address
- Brake fade during repeated or higher-temperature stops
- Excess dust, gas, and moisture buildup on the rotor face
- Surface rust and corrosion on exposed brake components
- Uneven pad contact caused by a contaminated friction surface
- Front rotor replacement needs on a 1994-1999 Dodge Ram 1500
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, and front axle fitment before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. Because this is a direct OE-fit rotor for the front position, no special modifications are required when used on the listed Ram 1500 applications.
Quality Assurance
PowerStop manufactures this rotor with precision cross-drilling, rounded slots, and a corrosion-resistant zinc dichromate finish to support consistent fit and finish on the listed vehicle applications. Part number AR8728XPR is built to match the specified OE-style dimensions for front brake service on the 1994-1999 Dodge Ram 1500.
PowerStop AR8728XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Brake Rotors
PowerStop AR8728XPR is a front brake rotor set built for 1994-1999 Dodge Ram 1500 applications. These vented, drilled, and slotted rotors are a direct OE-fit upgrade for drivers looking to improve brake cooling, surface cleaning, and corrosion resistance without special modifications.
The Power Stop rotor line focuses on practical braking performance for street and demanding use. On this application, the cross-drilled face helps move heat away from the braking surface, while the rounded slots clear gas, dust, and moisture to maintain consistent pad contact. Silver zinc dichromate plating adds rust resistance for long-term appearance and protection.
- Fits 1994-1999 Dodge Ram 1500, front
- Surface type: slotted and drilled for improved rotor cleaning
- Vented rotor design for heat management
- Silver zinc dichromate coating for rust and corrosion resistance
- Direct OE fit with no special modifications needed
- Outside diameter: 11.60 in. / 294.90 mm
- Nominal thickness: 1.28 in. / 32.50 mm
- Discard thickness: 1.21 in. / 30.70 mm
- Overall height: 4.50 in. / 114.60 mm
- 5-lug mounting pattern with 5.50 in. bolt circle diameter
Detailed Application Overview
PowerStop AR8728XPR is intended for front brake service on the Dodge Ram 1500 from 1994 through 1999. The drilled and slotted rotor face helps maintain a cleaner friction surface under repeated stops, while the vented construction supports cooling during heavier braking. For Ram 1500 owners searching for a front drilled and slotted brake rotor pair, AR8728XPR provides an OE-style replacement with upgraded surface treatment and performance-oriented rotor geometry.
This part cross-references PowerStop AR8728XPR for the same application.
What This Rotor Set Helps Address
- Brake fade during repeated or higher-temperature stops
- Excess dust, gas, and moisture buildup on the rotor face
- Surface rust and corrosion on exposed brake components
- Uneven pad contact caused by a contaminated friction surface
- Front rotor replacement needs on a 1994-1999 Dodge Ram 1500
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, and front axle fitment before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. Because this is a direct OE-fit rotor for the front position, no special modifications are required when used on the listed Ram 1500 applications.
Quality Assurance
PowerStop manufactures this rotor with precision cross-drilling, rounded slots, and a corrosion-resistant zinc dichromate finish to support consistent fit and finish on the listed vehicle applications. Part number AR8728XPR is built to match the specified OE-style dimensions for front brake service on the 1994-1999 Dodge Ram 1500.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Brake Rotors
PowerStop AR8728XPR is a front brake rotor set built for 1994-1999 Dodge Ram 1500 applications. These vented, drilled, and slotted rotors are a direct OE-fit upgrade for drivers looking to improve brake cooling, surface cleaning, and corrosion resistance without special modifications.
The Power Stop rotor line focuses on practical braking performance for street and demanding use. On this application, the cross-drilled face helps move heat away from the braking surface, while the rounded slots clear gas, dust, and moisture to maintain consistent pad contact. Silver zinc dichromate plating adds rust resistance for long-term appearance and protection.
- Fits 1994-1999 Dodge Ram 1500, front
- Surface type: slotted and drilled for improved rotor cleaning
- Vented rotor design for heat management
- Silver zinc dichromate coating for rust and corrosion resistance
- Direct OE fit with no special modifications needed
- Outside diameter: 11.60 in. / 294.90 mm
- Nominal thickness: 1.28 in. / 32.50 mm
- Discard thickness: 1.21 in. / 30.70 mm
- Overall height: 4.50 in. / 114.60 mm
- 5-lug mounting pattern with 5.50 in. bolt circle diameter
Detailed Application Overview
PowerStop AR8728XPR is intended for front brake service on the Dodge Ram 1500 from 1994 through 1999. The drilled and slotted rotor face helps maintain a cleaner friction surface under repeated stops, while the vented construction supports cooling during heavier braking. For Ram 1500 owners searching for a front drilled and slotted brake rotor pair, AR8728XPR provides an OE-style replacement with upgraded surface treatment and performance-oriented rotor geometry.
This part cross-references PowerStop AR8728XPR for the same application.
What This Rotor Set Helps Address
- Brake fade during repeated or higher-temperature stops
- Excess dust, gas, and moisture buildup on the rotor face
- Surface rust and corrosion on exposed brake components
- Uneven pad contact caused by a contaminated friction surface
- Front rotor replacement needs on a 1994-1999 Dodge Ram 1500
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, and front axle fitment before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. Because this is a direct OE-fit rotor for the front position, no special modifications are required when used on the listed Ram 1500 applications.
Quality Assurance
PowerStop manufactures this rotor with precision cross-drilling, rounded slots, and a corrosion-resistant zinc dichromate finish to support consistent fit and finish on the listed vehicle applications. Part number AR8728XPR is built to match the specified OE-style dimensions for front brake service on the 1994-1999 Dodge Ram 1500.
