PowerStop EBR1073XPR Disc Brake Rotor Set - Rear
Rear Drilled and Slotted Rotor Upgrade
PowerStop EBR1073XPR is a rear disc brake rotor set for select Volvo applications, including S60, V60, V60 Cross Country, S80, and XC70 models. It combines drilled and slotted rotor surfaces with a zinc-plated finish to support cooler braking and corrosion resistance in everyday and demanding driving.
Built as a direct OE-fit replacement, this rotor set is a practical choice for Volvo S60 rear rotor replacement and other rear brake service jobs where consistent pedal feel and clean rotor contact are priorities.
Key Features
- Drilled and slotted surface helps move heat, dust, gases, and moisture away from the friction area
- Silver zinc dichromate plating resists rust and surface corrosion
- Vented rotor design for rear brake applications
- Direct OE fit for straightforward replacement on listed Volvo vehicles
- 5-lug mounting pattern with 108 mm bolt circle diameter
- Outside diameter: 302 mm; overall height: 40.8 mm
- Nominal thickness: 22 mm; discard thickness: 20 mm
Product Details
Power Stop’s rear drilled, slotted and zinc plated brake rotor line focuses on cooling, surface cleaning, and OE-style fitment. The cross-drilled holes and rounded slots are used to help reduce buildup on the rotor face, while the vented construction supports heat management during repeated stops. For drivers searching for a rear brake rotor pair for Volvo S60, Volvo V60, or Volvo XC70 rear brake service, PowerStop EBR1073XPR provides a direct replacement format with corrosion-resistant coating and application-specific dimensions.
This part cross-references Raybestos Brakes 980609 for the same application.
What It Helps Address
- Brake fade during repeated stops or higher-temperature driving
- Rotor surface rust and corrosion on exposed brake components
- Dust and gas buildup between the pad and rotor face
- Uneven braking feel caused by worn or heat-affected rear rotors
- Rear brake service needs on select Volvo S60, V60, V60 Cross Country, S80, and XC70 models
Installation Notes and Fitment
Compatible With rear brake applications on the following vehicles:
- Fits 2017-2018 Volvo S60, rear; vented rear rotor; to CH# 411414
- Fits 2016 Volvo S60, rear; vented rear rotor
- Fits 2012-2015 Volvo S60, rear; with 315/336mm front rotor
- Fits 2011 Volvo S60, rear; 315mm front rotor compatibility
- Fits 2015-2018 Volvo V60, rear; vented rotor
- Fits 2015-2017 Volvo V60 Cross Country, rear; vented rear rotor
- Fits 2008-2016 Volvo S80, rear; with 336mm front rotor
- Fits 2007 Volvo S80, rear
- Fits 2008-2016 Volvo XC70, rear; vented rotor
Verify rotor dimensions, rear axle configuration, and vehicle build details before installation. Use standard brake service procedures and inspect pads, calipers, and hardware condition during replacement.
Quality Assurance
PowerStop manufactures this rotor set as a direct-fit brake replacement with application-specific sizing and a corrosion-resistant finish. Part number EBR1073XPR is engineered for the listed Volvo rear brake applications and is backed by PowerStop’s product quality standards.
Original: $243.60
-65%$243.60
$85.26PowerStop EBR1073XPR Disc Brake Rotor Set - Rear
Rear Drilled and Slotted Rotor Upgrade
PowerStop EBR1073XPR is a rear disc brake rotor set for select Volvo applications, including S60, V60, V60 Cross Country, S80, and XC70 models. It combines drilled and slotted rotor surfaces with a zinc-plated finish to support cooler braking and corrosion resistance in everyday and demanding driving.
Built as a direct OE-fit replacement, this rotor set is a practical choice for Volvo S60 rear rotor replacement and other rear brake service jobs where consistent pedal feel and clean rotor contact are priorities.
Key Features
- Drilled and slotted surface helps move heat, dust, gases, and moisture away from the friction area
- Silver zinc dichromate plating resists rust and surface corrosion
- Vented rotor design for rear brake applications
- Direct OE fit for straightforward replacement on listed Volvo vehicles
- 5-lug mounting pattern with 108 mm bolt circle diameter
- Outside diameter: 302 mm; overall height: 40.8 mm
- Nominal thickness: 22 mm; discard thickness: 20 mm
Product Details
Power Stop’s rear drilled, slotted and zinc plated brake rotor line focuses on cooling, surface cleaning, and OE-style fitment. The cross-drilled holes and rounded slots are used to help reduce buildup on the rotor face, while the vented construction supports heat management during repeated stops. For drivers searching for a rear brake rotor pair for Volvo S60, Volvo V60, or Volvo XC70 rear brake service, PowerStop EBR1073XPR provides a direct replacement format with corrosion-resistant coating and application-specific dimensions.
This part cross-references Raybestos Brakes 980609 for the same application.
What It Helps Address
- Brake fade during repeated stops or higher-temperature driving
- Rotor surface rust and corrosion on exposed brake components
- Dust and gas buildup between the pad and rotor face
- Uneven braking feel caused by worn or heat-affected rear rotors
- Rear brake service needs on select Volvo S60, V60, V60 Cross Country, S80, and XC70 models
Installation Notes and Fitment
Compatible With rear brake applications on the following vehicles:
- Fits 2017-2018 Volvo S60, rear; vented rear rotor; to CH# 411414
- Fits 2016 Volvo S60, rear; vented rear rotor
- Fits 2012-2015 Volvo S60, rear; with 315/336mm front rotor
- Fits 2011 Volvo S60, rear; 315mm front rotor compatibility
- Fits 2015-2018 Volvo V60, rear; vented rotor
- Fits 2015-2017 Volvo V60 Cross Country, rear; vented rear rotor
- Fits 2008-2016 Volvo S80, rear; with 336mm front rotor
- Fits 2007 Volvo S80, rear
- Fits 2008-2016 Volvo XC70, rear; vented rotor
Verify rotor dimensions, rear axle configuration, and vehicle build details before installation. Use standard brake service procedures and inspect pads, calipers, and hardware condition during replacement.
Quality Assurance
PowerStop manufactures this rotor set as a direct-fit brake replacement with application-specific sizing and a corrosion-resistant finish. Part number EBR1073XPR is engineered for the listed Volvo rear brake applications and is backed by PowerStop’s product quality standards.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Drilled and Slotted Rotor Upgrade
PowerStop EBR1073XPR is a rear disc brake rotor set for select Volvo applications, including S60, V60, V60 Cross Country, S80, and XC70 models. It combines drilled and slotted rotor surfaces with a zinc-plated finish to support cooler braking and corrosion resistance in everyday and demanding driving.
Built as a direct OE-fit replacement, this rotor set is a practical choice for Volvo S60 rear rotor replacement and other rear brake service jobs where consistent pedal feel and clean rotor contact are priorities.
Key Features
- Drilled and slotted surface helps move heat, dust, gases, and moisture away from the friction area
- Silver zinc dichromate plating resists rust and surface corrosion
- Vented rotor design for rear brake applications
- Direct OE fit for straightforward replacement on listed Volvo vehicles
- 5-lug mounting pattern with 108 mm bolt circle diameter
- Outside diameter: 302 mm; overall height: 40.8 mm
- Nominal thickness: 22 mm; discard thickness: 20 mm
Product Details
Power Stop’s rear drilled, slotted and zinc plated brake rotor line focuses on cooling, surface cleaning, and OE-style fitment. The cross-drilled holes and rounded slots are used to help reduce buildup on the rotor face, while the vented construction supports heat management during repeated stops. For drivers searching for a rear brake rotor pair for Volvo S60, Volvo V60, or Volvo XC70 rear brake service, PowerStop EBR1073XPR provides a direct replacement format with corrosion-resistant coating and application-specific dimensions.
This part cross-references Raybestos Brakes 980609 for the same application.
What It Helps Address
- Brake fade during repeated stops or higher-temperature driving
- Rotor surface rust and corrosion on exposed brake components
- Dust and gas buildup between the pad and rotor face
- Uneven braking feel caused by worn or heat-affected rear rotors
- Rear brake service needs on select Volvo S60, V60, V60 Cross Country, S80, and XC70 models
Installation Notes and Fitment
Compatible With rear brake applications on the following vehicles:
- Fits 2017-2018 Volvo S60, rear; vented rear rotor; to CH# 411414
- Fits 2016 Volvo S60, rear; vented rear rotor
- Fits 2012-2015 Volvo S60, rear; with 315/336mm front rotor
- Fits 2011 Volvo S60, rear; 315mm front rotor compatibility
- Fits 2015-2018 Volvo V60, rear; vented rotor
- Fits 2015-2017 Volvo V60 Cross Country, rear; vented rear rotor
- Fits 2008-2016 Volvo S80, rear; with 336mm front rotor
- Fits 2007 Volvo S80, rear
- Fits 2008-2016 Volvo XC70, rear; vented rotor
Verify rotor dimensions, rear axle configuration, and vehicle build details before installation. Use standard brake service procedures and inspect pads, calipers, and hardware condition during replacement.
Quality Assurance
PowerStop manufactures this rotor set as a direct-fit brake replacement with application-specific sizing and a corrosion-resistant finish. Part number EBR1073XPR is engineered for the listed Volvo rear brake applications and is backed by PowerStop’s product quality standards.
