PowerStop EBR1628XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Brake Rotors
PowerStop EBR1628XPR is a front disc brake rotor set built for Mercedes-Benz E550 and Mercedes-Benz E500 applications that use factory plain, undrilled front rotors. The slotted X drilled surface, vented construction, and rust-resistant zinc plating support cleaner rotor surfaces and improved heat management in demanding braking conditions.
Power Stop - Front Drilled, Slotted and Zinc Plated Brake Rotor Pair is part of PowerStop’s rotor line focused on direct OE fitment with performance-oriented surface design. For drivers searching for a front brake rotor upgrade for 2004-2006 Mercedes-Benz E500 or 2007-2009 Mercedes-Benz E550, this part number provides a direct replacement path without special modifications.
- Part number: EBR1628XPR
- Front disc brake rotor set for Mercedes-Benz E500 and E550 applications
- Slotted X drilled surface helps sweep away gas, dust, and moisture
- Silver zinc dichromate coating resists rust and corrosion
- Vented rotor design supports brake cooling
- Direct OE fit for factory plain/undrilled front rotor applications
- Outside diameter: 330 mm (13.00 in)
- Mounting bolt hole circle diameter: 112 mm (4.40 in)
- 5 lug hole configuration
Detailed Product Overview
PowerStop EBR1628XPR is engineered as a direct-fit front rotor replacement for 2004-2006 Mercedes-Benz E500 and 2007-2009 Mercedes-Benz E550 models equipped with the specified factory plain front rotors. The drilled and slotted face is intended to maintain a cleaner friction contact area while the vented rotor body helps move heat away from the braking surface. The zinc dichromate finish adds corrosion resistance for long-term appearance and service life.
This part cross-references Raybestos Brakes 980520 for the same application.
Common Brake Issues This Rotor Can Address
- Front brake fade during repeated stops or higher-heat driving
- Rotor surface buildup from dust, gas, and moisture
- Rust and corrosion on exposed rotor surfaces
- Uneven braking feel caused by worn or heat-stressed front rotors
- Replacement needs for factory plain/undrilled front rotor applications on Mercedes-Benz E500 and Mercedes-Benz E550
Installation Notes and Tips
Verify rotor diameter, bolt circle, and front application before installation. This rotor is listed for front use only and for vehicles with factory plain/undrilled front rotors, including 2004-2006 Mercedes-Benz E500 and 2007-2009 Mercedes-Benz E550. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before completing the brake service.
Quality Assurance
PowerStop manufactures this rotor with precision cross-drilling, rounded slots, and a zinc-plated finish to support consistent fit and corrosion resistance. The direct OE fit design is intended to match the original front rotor application without special modifications.
Original: $392.06
-65%$392.06
$137.22PowerStop EBR1628XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Brake Rotors
PowerStop EBR1628XPR is a front disc brake rotor set built for Mercedes-Benz E550 and Mercedes-Benz E500 applications that use factory plain, undrilled front rotors. The slotted X drilled surface, vented construction, and rust-resistant zinc plating support cleaner rotor surfaces and improved heat management in demanding braking conditions.
Power Stop - Front Drilled, Slotted and Zinc Plated Brake Rotor Pair is part of PowerStop’s rotor line focused on direct OE fitment with performance-oriented surface design. For drivers searching for a front brake rotor upgrade for 2004-2006 Mercedes-Benz E500 or 2007-2009 Mercedes-Benz E550, this part number provides a direct replacement path without special modifications.
- Part number: EBR1628XPR
- Front disc brake rotor set for Mercedes-Benz E500 and E550 applications
- Slotted X drilled surface helps sweep away gas, dust, and moisture
- Silver zinc dichromate coating resists rust and corrosion
- Vented rotor design supports brake cooling
- Direct OE fit for factory plain/undrilled front rotor applications
- Outside diameter: 330 mm (13.00 in)
- Mounting bolt hole circle diameter: 112 mm (4.40 in)
- 5 lug hole configuration
Detailed Product Overview
PowerStop EBR1628XPR is engineered as a direct-fit front rotor replacement for 2004-2006 Mercedes-Benz E500 and 2007-2009 Mercedes-Benz E550 models equipped with the specified factory plain front rotors. The drilled and slotted face is intended to maintain a cleaner friction contact area while the vented rotor body helps move heat away from the braking surface. The zinc dichromate finish adds corrosion resistance for long-term appearance and service life.
This part cross-references Raybestos Brakes 980520 for the same application.
Common Brake Issues This Rotor Can Address
- Front brake fade during repeated stops or higher-heat driving
- Rotor surface buildup from dust, gas, and moisture
- Rust and corrosion on exposed rotor surfaces
- Uneven braking feel caused by worn or heat-stressed front rotors
- Replacement needs for factory plain/undrilled front rotor applications on Mercedes-Benz E500 and Mercedes-Benz E550
Installation Notes and Tips
Verify rotor diameter, bolt circle, and front application before installation. This rotor is listed for front use only and for vehicles with factory plain/undrilled front rotors, including 2004-2006 Mercedes-Benz E500 and 2007-2009 Mercedes-Benz E550. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before completing the brake service.
Quality Assurance
PowerStop manufactures this rotor with precision cross-drilling, rounded slots, and a zinc-plated finish to support consistent fit and corrosion resistance. The direct OE fit design is intended to match the original front rotor application without special modifications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Brake Rotors
PowerStop EBR1628XPR is a front disc brake rotor set built for Mercedes-Benz E550 and Mercedes-Benz E500 applications that use factory plain, undrilled front rotors. The slotted X drilled surface, vented construction, and rust-resistant zinc plating support cleaner rotor surfaces and improved heat management in demanding braking conditions.
Power Stop - Front Drilled, Slotted and Zinc Plated Brake Rotor Pair is part of PowerStop’s rotor line focused on direct OE fitment with performance-oriented surface design. For drivers searching for a front brake rotor upgrade for 2004-2006 Mercedes-Benz E500 or 2007-2009 Mercedes-Benz E550, this part number provides a direct replacement path without special modifications.
- Part number: EBR1628XPR
- Front disc brake rotor set for Mercedes-Benz E500 and E550 applications
- Slotted X drilled surface helps sweep away gas, dust, and moisture
- Silver zinc dichromate coating resists rust and corrosion
- Vented rotor design supports brake cooling
- Direct OE fit for factory plain/undrilled front rotor applications
- Outside diameter: 330 mm (13.00 in)
- Mounting bolt hole circle diameter: 112 mm (4.40 in)
- 5 lug hole configuration
Detailed Product Overview
PowerStop EBR1628XPR is engineered as a direct-fit front rotor replacement for 2004-2006 Mercedes-Benz E500 and 2007-2009 Mercedes-Benz E550 models equipped with the specified factory plain front rotors. The drilled and slotted face is intended to maintain a cleaner friction contact area while the vented rotor body helps move heat away from the braking surface. The zinc dichromate finish adds corrosion resistance for long-term appearance and service life.
This part cross-references Raybestos Brakes 980520 for the same application.
Common Brake Issues This Rotor Can Address
- Front brake fade during repeated stops or higher-heat driving
- Rotor surface buildup from dust, gas, and moisture
- Rust and corrosion on exposed rotor surfaces
- Uneven braking feel caused by worn or heat-stressed front rotors
- Replacement needs for factory plain/undrilled front rotor applications on Mercedes-Benz E500 and Mercedes-Benz E550
Installation Notes and Tips
Verify rotor diameter, bolt circle, and front application before installation. This rotor is listed for front use only and for vehicles with factory plain/undrilled front rotors, including 2004-2006 Mercedes-Benz E500 and 2007-2009 Mercedes-Benz E550. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before completing the brake service.
Quality Assurance
PowerStop manufactures this rotor with precision cross-drilling, rounded slots, and a zinc-plated finish to support consistent fit and corrosion resistance. The direct OE fit design is intended to match the original front rotor application without special modifications.
