PowerStop EBR1684XPR Disc Brake Rotor Set - Front
Rear Drilled and Slotted Brake Rotors
PowerStop EBR1684XPR is a drilled and slotted brake rotor set built for direct OE-style replacement and improved heat management. The vented rotor design, zinc dichromate plating, and precision-machined surface features support consistent braking performance in demanding driving conditions.
Compatible with 2017-2020 Jaguar F-Pace front and 2018-2020 Land Rover Range Rover Velar front with 325mm front rotor applications, this rotor set is a fitment-focused upgrade for drivers searching for PowerStop EBR1684XPR brake rotors for Jaguar F-Pace or Land Rover Range Rover Velar front brake replacement.
Key Features
- Slotted and cross-drilled surface helps move away gas, dust, and moisture from the friction area
- Vented rotor construction supports brake cooling during repeated stops
- Silver zinc dichromate coating resists rust and corrosion
- Direct OE fit for straightforward replacement without special modifications
- Outside diameter: 325.06 mm (12.80 in)
- Mounting bolt hole circle diameter: 108.00 mm (4.25 in)
- 5-lug mounting pattern
- Nominal thickness: 29.96 mm (1.18 in); discard thickness: 28.00 mm (1.10 in)
Product Details
Power Stop’s drilled and slotted rotor line focuses on thermal control and surface cleaning. On this EBR1684XPR application, the cross-drilled holes and rounded slots are used to help maintain a cleaner contact patch while the vented design supports airflow through the rotor. The zinc-plated finish adds corrosion resistance for long-term service in exposed wheel-end environments. This part cross-references Dynamic Friction Company 600-20038 and Raybestos Brakes 982364R for the same application.
Use PowerStop EBR1684XPR when replacing worn front brake rotors on a Jaguar F-Pace or Land Rover Range Rover Velar with the specified 325mm front rotor setup. The rotor dimensions and OE-style mounting pattern are important for proper fitment and brake system alignment.
What This Rotor Set Helps Address
- Brake fade during repeated stops or higher-temperature driving
- Rotor surface glazing and uneven friction contact
- Rust buildup on exposed rotor surfaces
- Dust, gas, and moisture accumulation on the braking surface
- Vibration or pulsation caused by worn or heat-affected rotors
Installation Notes and Tips
Confirm rotor diameter, bolt circle, and front axle application before installation. This part is listed for front positions on 2017-2020 Jaguar F-Pace and 2018-2020 Land Rover Range Rover Velar with 325mm front rotor fitment. Inspect pads, calipers, and hub surfaces during replacement, and verify rotor thickness against service limits before returning the vehicle to service.
Quality Assurance
PowerStop manufactures this rotor pair with OE-fit dimensions, vented construction, and a corrosion-resistant zinc finish to support consistent fitment and service life. The EBR1684XPR part number identifies the correct drilled and slotted rotor application for the listed vehicles.
Original: $287.56
-65%$287.56
$100.65PowerStop EBR1684XPR Disc Brake Rotor Set - Front
Rear Drilled and Slotted Brake Rotors
PowerStop EBR1684XPR is a drilled and slotted brake rotor set built for direct OE-style replacement and improved heat management. The vented rotor design, zinc dichromate plating, and precision-machined surface features support consistent braking performance in demanding driving conditions.
Compatible with 2017-2020 Jaguar F-Pace front and 2018-2020 Land Rover Range Rover Velar front with 325mm front rotor applications, this rotor set is a fitment-focused upgrade for drivers searching for PowerStop EBR1684XPR brake rotors for Jaguar F-Pace or Land Rover Range Rover Velar front brake replacement.
Key Features
- Slotted and cross-drilled surface helps move away gas, dust, and moisture from the friction area
- Vented rotor construction supports brake cooling during repeated stops
- Silver zinc dichromate coating resists rust and corrosion
- Direct OE fit for straightforward replacement without special modifications
- Outside diameter: 325.06 mm (12.80 in)
- Mounting bolt hole circle diameter: 108.00 mm (4.25 in)
- 5-lug mounting pattern
- Nominal thickness: 29.96 mm (1.18 in); discard thickness: 28.00 mm (1.10 in)
Product Details
Power Stop’s drilled and slotted rotor line focuses on thermal control and surface cleaning. On this EBR1684XPR application, the cross-drilled holes and rounded slots are used to help maintain a cleaner contact patch while the vented design supports airflow through the rotor. The zinc-plated finish adds corrosion resistance for long-term service in exposed wheel-end environments. This part cross-references Dynamic Friction Company 600-20038 and Raybestos Brakes 982364R for the same application.
Use PowerStop EBR1684XPR when replacing worn front brake rotors on a Jaguar F-Pace or Land Rover Range Rover Velar with the specified 325mm front rotor setup. The rotor dimensions and OE-style mounting pattern are important for proper fitment and brake system alignment.
What This Rotor Set Helps Address
- Brake fade during repeated stops or higher-temperature driving
- Rotor surface glazing and uneven friction contact
- Rust buildup on exposed rotor surfaces
- Dust, gas, and moisture accumulation on the braking surface
- Vibration or pulsation caused by worn or heat-affected rotors
Installation Notes and Tips
Confirm rotor diameter, bolt circle, and front axle application before installation. This part is listed for front positions on 2017-2020 Jaguar F-Pace and 2018-2020 Land Rover Range Rover Velar with 325mm front rotor fitment. Inspect pads, calipers, and hub surfaces during replacement, and verify rotor thickness against service limits before returning the vehicle to service.
Quality Assurance
PowerStop manufactures this rotor pair with OE-fit dimensions, vented construction, and a corrosion-resistant zinc finish to support consistent fitment and service life. The EBR1684XPR part number identifies the correct drilled and slotted rotor application for the listed vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Drilled and Slotted Brake Rotors
PowerStop EBR1684XPR is a drilled and slotted brake rotor set built for direct OE-style replacement and improved heat management. The vented rotor design, zinc dichromate plating, and precision-machined surface features support consistent braking performance in demanding driving conditions.
Compatible with 2017-2020 Jaguar F-Pace front and 2018-2020 Land Rover Range Rover Velar front with 325mm front rotor applications, this rotor set is a fitment-focused upgrade for drivers searching for PowerStop EBR1684XPR brake rotors for Jaguar F-Pace or Land Rover Range Rover Velar front brake replacement.
Key Features
- Slotted and cross-drilled surface helps move away gas, dust, and moisture from the friction area
- Vented rotor construction supports brake cooling during repeated stops
- Silver zinc dichromate coating resists rust and corrosion
- Direct OE fit for straightforward replacement without special modifications
- Outside diameter: 325.06 mm (12.80 in)
- Mounting bolt hole circle diameter: 108.00 mm (4.25 in)
- 5-lug mounting pattern
- Nominal thickness: 29.96 mm (1.18 in); discard thickness: 28.00 mm (1.10 in)
Product Details
Power Stop’s drilled and slotted rotor line focuses on thermal control and surface cleaning. On this EBR1684XPR application, the cross-drilled holes and rounded slots are used to help maintain a cleaner contact patch while the vented design supports airflow through the rotor. The zinc-plated finish adds corrosion resistance for long-term service in exposed wheel-end environments. This part cross-references Dynamic Friction Company 600-20038 and Raybestos Brakes 982364R for the same application.
Use PowerStop EBR1684XPR when replacing worn front brake rotors on a Jaguar F-Pace or Land Rover Range Rover Velar with the specified 325mm front rotor setup. The rotor dimensions and OE-style mounting pattern are important for proper fitment and brake system alignment.
What This Rotor Set Helps Address
- Brake fade during repeated stops or higher-temperature driving
- Rotor surface glazing and uneven friction contact
- Rust buildup on exposed rotor surfaces
- Dust, gas, and moisture accumulation on the braking surface
- Vibration or pulsation caused by worn or heat-affected rotors
Installation Notes and Tips
Confirm rotor diameter, bolt circle, and front axle application before installation. This part is listed for front positions on 2017-2020 Jaguar F-Pace and 2018-2020 Land Rover Range Rover Velar with 325mm front rotor fitment. Inspect pads, calipers, and hub surfaces during replacement, and verify rotor thickness against service limits before returning the vehicle to service.
Quality Assurance
PowerStop manufactures this rotor pair with OE-fit dimensions, vented construction, and a corrosion-resistant zinc finish to support consistent fitment and service life. The EBR1684XPR part number identifies the correct drilled and slotted rotor application for the listed vehicles.
