PowerStop JBR1387XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop JBR1387XPR is a front disc brake rotor set for the 2009-2011 Nissan Versa. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in daily driving and demanding stops.
The Power Stop front drilled, slotted and zinc plated brake rotor pair is built as a direct OE-fit replacement for the Nissan Versa front axle, with no special modifications required.
Key Features
- Precision cross-drilled rotor face helps move heat away during repeated braking
- Rounded slots sweep away gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and surface corrosion
- Vented rotor design supports heat management
- Direct OE fit for straightforward replacement on the front position
- Compatible With 2009-2011 Nissan Versa, front
Detailed Product Overview
PowerStop JBR1387XPR is engineered for drivers who want a front brake rotor upgrade with OE-style fitment and performance-focused surface design. The rotor measures 10.20 inches in outside diameter, 1.70 inches in overall height, and uses a vented construction with a 4-lug, 114.30 mm bolt circle. Nominal thickness is 20.00 mm, with discard thickness listed at 20.00 mm and 0.79 in. The slotted X drilled surface helps maintain a cleaner contact patch between the pad and rotor, while the zinc-plated finish adds protection against rust.
This part cross-references Centric Parts 120.42106 for the same application. PowerStop JBR1387XPR is a fitment-based choice for 2009-2011 Nissan Versa front brake service when a drilled and slotted rotor is preferred over a standard replacement rotor.
What This Rotor May Address
- Brake fade during repeated stops or higher-heat driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or heat-affected rotors
- Front brake vibration related to rotor wear or surface condition
Installation Notes and Tips
Install on the front position only for the listed Nissan Versa applications. Verify rotor dimensions, bolt pattern, and thickness before installation, and inspect pads, calipers, and hub surfaces at the same time. Proper bedding-in of new pads and rotors helps establish consistent friction contact after service.
Quality Assurance
Power Stop designs this rotor with OE fitment and corrosion-resistant plating for dependable replacement service. The drilled and slotted construction follows the brand’s performance-oriented rotor approach for improved cooling and surface cleaning under braking load.
Original: $172.44
-65%$172.44
$60.35PowerStop JBR1387XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop JBR1387XPR is a front disc brake rotor set for the 2009-2011 Nissan Versa. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in daily driving and demanding stops.
The Power Stop front drilled, slotted and zinc plated brake rotor pair is built as a direct OE-fit replacement for the Nissan Versa front axle, with no special modifications required.
Key Features
- Precision cross-drilled rotor face helps move heat away during repeated braking
- Rounded slots sweep away gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and surface corrosion
- Vented rotor design supports heat management
- Direct OE fit for straightforward replacement on the front position
- Compatible With 2009-2011 Nissan Versa, front
Detailed Product Overview
PowerStop JBR1387XPR is engineered for drivers who want a front brake rotor upgrade with OE-style fitment and performance-focused surface design. The rotor measures 10.20 inches in outside diameter, 1.70 inches in overall height, and uses a vented construction with a 4-lug, 114.30 mm bolt circle. Nominal thickness is 20.00 mm, with discard thickness listed at 20.00 mm and 0.79 in. The slotted X drilled surface helps maintain a cleaner contact patch between the pad and rotor, while the zinc-plated finish adds protection against rust.
This part cross-references Centric Parts 120.42106 for the same application. PowerStop JBR1387XPR is a fitment-based choice for 2009-2011 Nissan Versa front brake service when a drilled and slotted rotor is preferred over a standard replacement rotor.
What This Rotor May Address
- Brake fade during repeated stops or higher-heat driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or heat-affected rotors
- Front brake vibration related to rotor wear or surface condition
Installation Notes and Tips
Install on the front position only for the listed Nissan Versa applications. Verify rotor dimensions, bolt pattern, and thickness before installation, and inspect pads, calipers, and hub surfaces at the same time. Proper bedding-in of new pads and rotors helps establish consistent friction contact after service.
Quality Assurance
Power Stop designs this rotor with OE fitment and corrosion-resistant plating for dependable replacement service. The drilled and slotted construction follows the brand’s performance-oriented rotor approach for improved cooling and surface cleaning under braking load.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Rotor Upgrade
PowerStop JBR1387XPR is a front disc brake rotor set for the 2009-2011 Nissan Versa. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in daily driving and demanding stops.
The Power Stop front drilled, slotted and zinc plated brake rotor pair is built as a direct OE-fit replacement for the Nissan Versa front axle, with no special modifications required.
Key Features
- Precision cross-drilled rotor face helps move heat away during repeated braking
- Rounded slots sweep away gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and surface corrosion
- Vented rotor design supports heat management
- Direct OE fit for straightforward replacement on the front position
- Compatible With 2009-2011 Nissan Versa, front
Detailed Product Overview
PowerStop JBR1387XPR is engineered for drivers who want a front brake rotor upgrade with OE-style fitment and performance-focused surface design. The rotor measures 10.20 inches in outside diameter, 1.70 inches in overall height, and uses a vented construction with a 4-lug, 114.30 mm bolt circle. Nominal thickness is 20.00 mm, with discard thickness listed at 20.00 mm and 0.79 in. The slotted X drilled surface helps maintain a cleaner contact patch between the pad and rotor, while the zinc-plated finish adds protection against rust.
This part cross-references Centric Parts 120.42106 for the same application. PowerStop JBR1387XPR is a fitment-based choice for 2009-2011 Nissan Versa front brake service when a drilled and slotted rotor is preferred over a standard replacement rotor.
What This Rotor May Address
- Brake fade during repeated stops or higher-heat driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or heat-affected rotors
- Front brake vibration related to rotor wear or surface condition
Installation Notes and Tips
Install on the front position only for the listed Nissan Versa applications. Verify rotor dimensions, bolt pattern, and thickness before installation, and inspect pads, calipers, and hub surfaces at the same time. Proper bedding-in of new pads and rotors helps establish consistent friction contact after service.
Quality Assurance
Power Stop designs this rotor with OE fitment and corrosion-resistant plating for dependable replacement service. The drilled and slotted construction follows the brand’s performance-oriented rotor approach for improved cooling and surface cleaning under braking load.
