PowerStop JBR1514XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop JBR1514XPR is a front disc brake rotor set built for 2003-2005 Kia Rio applications. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and better corrosion resistance in everyday and demanding driving.
Compatible With 2003-2005 Kia Rio front brake service, this rotor set follows direct OE fitment for a straightforward replacement on the front axle. The Power Stop front drilled, slotted and zinc plated brake rotor pair line is focused on bolt-on brake upgrades without requiring special modifications.
Key Features
- Fits 2003-2005 Kia Rio, front
- PowerStop part number JBR1514XPR
- Cross-drilled rotor surface for improved heat dissipation
- Rounded slots help clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and corrosion
- Vented rotor design for front brake cooling
- Direct OE fit for standard replacement applications
Detailed Product Overview
PowerStop JBR1514XPR is engineered as a front brake rotor replacement for the 2003-2005 Kia Rio. The rotor uses a slotted X drilled surface with a vented construction, 10.00-inch outside diameter, 2.00-inch overall height, and 4-lug, 100.00 mm bolt circle fitment. Nominal thickness is listed at 22.00 mm, with discard thickness at 22.00 mm, and the zinc-plated finish adds a layer of protection against surface rust.
This product line is built around a practical brake upgrade approach: drilled holes help move heat away from the rotor face, while the slots sweep away dust, gases, and moisture to maintain a cleaner pad-to-rotor contact patch. For drivers searching for a front drilled slotted brake rotor for Kia Rio 2003 2004 2005, JBR1514XPR provides an OE-style replacement with performance-oriented surface treatment.
This part cross-references Centric Parts 120.50011 and Raybestos Brakes 980241 for the same application.
What It Helps Address
- Brake fade during repeated stops
- Heat buildup in front brake service
- Rotor surface rust and corrosion exposure
- Dust, gas, and moisture buildup on the friction surface
- Uneven pad contact caused by worn or damaged rotors
Installation Notes and Tips
Install on the front axle only for the listed Kia Rio fitment. Verify rotor dimensions, bolt pattern, and hub fit before installation, and inspect pads, calipers, and hardware condition during brake service. Proper bedding-in of new pads and rotors helps establish consistent friction contact after installation.
Quality Assurance
PowerStop manufactures this rotor as a direct-fit replacement with zinc dichromate plating for added corrosion resistance and a vented, drilled, and slotted design for brake cooling performance. The JBR1514XPR follows OE-style fitment for the listed Kia Rio applications.
Original: $159.38
-65%$159.38
$55.78PowerStop JBR1514XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Rotor Upgrade
PowerStop JBR1514XPR is a front disc brake rotor set built for 2003-2005 Kia Rio applications. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and better corrosion resistance in everyday and demanding driving.
Compatible With 2003-2005 Kia Rio front brake service, this rotor set follows direct OE fitment for a straightforward replacement on the front axle. The Power Stop front drilled, slotted and zinc plated brake rotor pair line is focused on bolt-on brake upgrades without requiring special modifications.
Key Features
- Fits 2003-2005 Kia Rio, front
- PowerStop part number JBR1514XPR
- Cross-drilled rotor surface for improved heat dissipation
- Rounded slots help clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and corrosion
- Vented rotor design for front brake cooling
- Direct OE fit for standard replacement applications
Detailed Product Overview
PowerStop JBR1514XPR is engineered as a front brake rotor replacement for the 2003-2005 Kia Rio. The rotor uses a slotted X drilled surface with a vented construction, 10.00-inch outside diameter, 2.00-inch overall height, and 4-lug, 100.00 mm bolt circle fitment. Nominal thickness is listed at 22.00 mm, with discard thickness at 22.00 mm, and the zinc-plated finish adds a layer of protection against surface rust.
This product line is built around a practical brake upgrade approach: drilled holes help move heat away from the rotor face, while the slots sweep away dust, gases, and moisture to maintain a cleaner pad-to-rotor contact patch. For drivers searching for a front drilled slotted brake rotor for Kia Rio 2003 2004 2005, JBR1514XPR provides an OE-style replacement with performance-oriented surface treatment.
This part cross-references Centric Parts 120.50011 and Raybestos Brakes 980241 for the same application.
What It Helps Address
- Brake fade during repeated stops
- Heat buildup in front brake service
- Rotor surface rust and corrosion exposure
- Dust, gas, and moisture buildup on the friction surface
- Uneven pad contact caused by worn or damaged rotors
Installation Notes and Tips
Install on the front axle only for the listed Kia Rio fitment. Verify rotor dimensions, bolt pattern, and hub fit before installation, and inspect pads, calipers, and hardware condition during brake service. Proper bedding-in of new pads and rotors helps establish consistent friction contact after installation.
Quality Assurance
PowerStop manufactures this rotor as a direct-fit replacement with zinc dichromate plating for added corrosion resistance and a vented, drilled, and slotted design for brake cooling performance. The JBR1514XPR follows OE-style fitment for the listed Kia Rio applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Rotor Upgrade
PowerStop JBR1514XPR is a front disc brake rotor set built for 2003-2005 Kia Rio applications. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and better corrosion resistance in everyday and demanding driving.
Compatible With 2003-2005 Kia Rio front brake service, this rotor set follows direct OE fitment for a straightforward replacement on the front axle. The Power Stop front drilled, slotted and zinc plated brake rotor pair line is focused on bolt-on brake upgrades without requiring special modifications.
Key Features
- Fits 2003-2005 Kia Rio, front
- PowerStop part number JBR1514XPR
- Cross-drilled rotor surface for improved heat dissipation
- Rounded slots help clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and corrosion
- Vented rotor design for front brake cooling
- Direct OE fit for standard replacement applications
Detailed Product Overview
PowerStop JBR1514XPR is engineered as a front brake rotor replacement for the 2003-2005 Kia Rio. The rotor uses a slotted X drilled surface with a vented construction, 10.00-inch outside diameter, 2.00-inch overall height, and 4-lug, 100.00 mm bolt circle fitment. Nominal thickness is listed at 22.00 mm, with discard thickness at 22.00 mm, and the zinc-plated finish adds a layer of protection against surface rust.
This product line is built around a practical brake upgrade approach: drilled holes help move heat away from the rotor face, while the slots sweep away dust, gases, and moisture to maintain a cleaner pad-to-rotor contact patch. For drivers searching for a front drilled slotted brake rotor for Kia Rio 2003 2004 2005, JBR1514XPR provides an OE-style replacement with performance-oriented surface treatment.
This part cross-references Centric Parts 120.50011 and Raybestos Brakes 980241 for the same application.
What It Helps Address
- Brake fade during repeated stops
- Heat buildup in front brake service
- Rotor surface rust and corrosion exposure
- Dust, gas, and moisture buildup on the friction surface
- Uneven pad contact caused by worn or damaged rotors
Installation Notes and Tips
Install on the front axle only for the listed Kia Rio fitment. Verify rotor dimensions, bolt pattern, and hub fit before installation, and inspect pads, calipers, and hardware condition during brake service. Proper bedding-in of new pads and rotors helps establish consistent friction contact after installation.
Quality Assurance
PowerStop manufactures this rotor as a direct-fit replacement with zinc dichromate plating for added corrosion resistance and a vented, drilled, and slotted design for brake cooling performance. The JBR1514XPR follows OE-style fitment for the listed Kia Rio applications.
