PowerStop JBR1756XPR Disc Brake Rotor Set - Rear
Rear Brake Rotor Upgrade for Honda Odyssey
PowerStop JBR1756XPR is a rear disc brake rotor set built for 2018-2026 Honda Odyssey applications. It combines drilled and slotted rotor surfaces with a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in everyday driving and demanding conditions.
For drivers searching for a rear drilled and slotted brake rotor pair for Honda Odyssey rear fitment, this Power Stop rotor set provides a direct OE-style replacement with performance-focused surface design and no special modifications required.
Key Features
- Precision cross-drilled design helps move heat away from the braking surface
- Rounded slots clear gases, dust, and moisture from the rotor face
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the rear axle
- Surface type: slotted and drilled
- Outside diameter: 329.70 mm (13.00 in)
- Nominal thickness: 9.00 mm; discard thickness: 9.00 mm
- Overall height: 38.90 mm (1.50 in)
- 5-lug bolt pattern with 120.00 mm (4.70 in) bolt circle diameter
Product Details
Power Stop’s rear drilled and slotted rotor line focuses on brake cooling, consistent pad contact, and corrosion protection. The JBR1756XPR is engineered as a direct-fit rear rotor solution for Honda Odyssey models, including 2018-2021 Honda Odyssey rear and 2022-2026 Honda Odyssey rear applications. This part cross-references Centric Parts 120.40099 and Honda 42510THRA00 for the same application.
Compatible With 2018-2026 Honda Odyssey rear brake service, this rotor set is a practical choice when replacing worn rear rotors on a Honda Odyssey and when looking for a rear drilled slotted rotor upgrade with OE-style fitment. PowerStop JBR1756XPR is also listed under PowerStop interchange JBR1756XPR.
Common Problems This Rotor Can Address
- Brake fade from heat buildup during repeated stops
- Rotor surface glazing that reduces pad bite
- Dust, gas, and moisture buildup on the braking surface
- Rust and corrosion on exposed rotor surfaces
- Vibration or uneven braking caused by worn rear rotors
Installation Notes and Tips
Install on the rear axle only and verify rotor dimensions, bolt circle, and hub fitment before assembly. Clean the rotor and hub mating surfaces before installation to help prevent runout-related brake noise or pedal pulsation. Follow the vehicle manufacturer’s brake service procedures and bed in new pads according to the pad maker’s instructions.
Quality Assurance
Power Stop manufactures this rotor set with drilled and slotted surfaces, zinc dichromate plating, and direct OE-fit dimensions for consistent replacement performance. The design is intended to meet the needs of rear brake service on Honda Odyssey models from 2018 through 2026.
Original: $227.64
-65%$227.64
$79.67PowerStop JBR1756XPR Disc Brake Rotor Set - Rear
Rear Brake Rotor Upgrade for Honda Odyssey
PowerStop JBR1756XPR is a rear disc brake rotor set built for 2018-2026 Honda Odyssey applications. It combines drilled and slotted rotor surfaces with a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in everyday driving and demanding conditions.
For drivers searching for a rear drilled and slotted brake rotor pair for Honda Odyssey rear fitment, this Power Stop rotor set provides a direct OE-style replacement with performance-focused surface design and no special modifications required.
Key Features
- Precision cross-drilled design helps move heat away from the braking surface
- Rounded slots clear gases, dust, and moisture from the rotor face
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the rear axle
- Surface type: slotted and drilled
- Outside diameter: 329.70 mm (13.00 in)
- Nominal thickness: 9.00 mm; discard thickness: 9.00 mm
- Overall height: 38.90 mm (1.50 in)
- 5-lug bolt pattern with 120.00 mm (4.70 in) bolt circle diameter
Product Details
Power Stop’s rear drilled and slotted rotor line focuses on brake cooling, consistent pad contact, and corrosion protection. The JBR1756XPR is engineered as a direct-fit rear rotor solution for Honda Odyssey models, including 2018-2021 Honda Odyssey rear and 2022-2026 Honda Odyssey rear applications. This part cross-references Centric Parts 120.40099 and Honda 42510THRA00 for the same application.
Compatible With 2018-2026 Honda Odyssey rear brake service, this rotor set is a practical choice when replacing worn rear rotors on a Honda Odyssey and when looking for a rear drilled slotted rotor upgrade with OE-style fitment. PowerStop JBR1756XPR is also listed under PowerStop interchange JBR1756XPR.
Common Problems This Rotor Can Address
- Brake fade from heat buildup during repeated stops
- Rotor surface glazing that reduces pad bite
- Dust, gas, and moisture buildup on the braking surface
- Rust and corrosion on exposed rotor surfaces
- Vibration or uneven braking caused by worn rear rotors
Installation Notes and Tips
Install on the rear axle only and verify rotor dimensions, bolt circle, and hub fitment before assembly. Clean the rotor and hub mating surfaces before installation to help prevent runout-related brake noise or pedal pulsation. Follow the vehicle manufacturer’s brake service procedures and bed in new pads according to the pad maker’s instructions.
Quality Assurance
Power Stop manufactures this rotor set with drilled and slotted surfaces, zinc dichromate plating, and direct OE-fit dimensions for consistent replacement performance. The design is intended to meet the needs of rear brake service on Honda Odyssey models from 2018 through 2026.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Rotor Upgrade for Honda Odyssey
PowerStop JBR1756XPR is a rear disc brake rotor set built for 2018-2026 Honda Odyssey applications. It combines drilled and slotted rotor surfaces with a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in everyday driving and demanding conditions.
For drivers searching for a rear drilled and slotted brake rotor pair for Honda Odyssey rear fitment, this Power Stop rotor set provides a direct OE-style replacement with performance-focused surface design and no special modifications required.
Key Features
- Precision cross-drilled design helps move heat away from the braking surface
- Rounded slots clear gases, dust, and moisture from the rotor face
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the rear axle
- Surface type: slotted and drilled
- Outside diameter: 329.70 mm (13.00 in)
- Nominal thickness: 9.00 mm; discard thickness: 9.00 mm
- Overall height: 38.90 mm (1.50 in)
- 5-lug bolt pattern with 120.00 mm (4.70 in) bolt circle diameter
Product Details
Power Stop’s rear drilled and slotted rotor line focuses on brake cooling, consistent pad contact, and corrosion protection. The JBR1756XPR is engineered as a direct-fit rear rotor solution for Honda Odyssey models, including 2018-2021 Honda Odyssey rear and 2022-2026 Honda Odyssey rear applications. This part cross-references Centric Parts 120.40099 and Honda 42510THRA00 for the same application.
Compatible With 2018-2026 Honda Odyssey rear brake service, this rotor set is a practical choice when replacing worn rear rotors on a Honda Odyssey and when looking for a rear drilled slotted rotor upgrade with OE-style fitment. PowerStop JBR1756XPR is also listed under PowerStop interchange JBR1756XPR.
Common Problems This Rotor Can Address
- Brake fade from heat buildup during repeated stops
- Rotor surface glazing that reduces pad bite
- Dust, gas, and moisture buildup on the braking surface
- Rust and corrosion on exposed rotor surfaces
- Vibration or uneven braking caused by worn rear rotors
Installation Notes and Tips
Install on the rear axle only and verify rotor dimensions, bolt circle, and hub fitment before assembly. Clean the rotor and hub mating surfaces before installation to help prevent runout-related brake noise or pedal pulsation. Follow the vehicle manufacturer’s brake service procedures and bed in new pads according to the pad maker’s instructions.
Quality Assurance
Power Stop manufactures this rotor set with drilled and slotted surfaces, zinc dichromate plating, and direct OE-fit dimensions for consistent replacement performance. The design is intended to meet the needs of rear brake service on Honda Odyssey models from 2018 through 2026.
