PowerStop JBR1796XPR Disc Brake Rotor Set - Rear
Rear Brake Rotor Upgrade for Nissan Altima and Kicks
PowerStop JBR1796XPR is a rear disc brake rotor set built for direct OE fitment on select Nissan applications. It combines drilled and slotted rotor surfaces with zinc plating to support cooler operation, cleaner pad contact, and corrosion resistance in everyday driving and demanding stops.
Key Features
- Drilled and slotted surface helps move heat, dust, gas, and moisture away from the braking surface
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the listed rear applications
- Solid rotor design with a 11.02 in. outside diameter
- 5-lug, 114.30 mm bolt circle specification
- Nominal thickness: 0.38 in. / 9.60 mm; discard thickness: 0.34 in. / 8.60 mm
Product Details
The Power Stop rear drilled, slotted and zinc plated brake rotor pair is engineered for drivers who want a service replacement with added thermal management and surface cleaning features. The cross-drilled pattern supports heat dissipation, while the rounded slots help clear gases, dust, and moisture from the rotor face to maintain consistent pad contact. The zinc dichromate finish adds a rust-resistant layer that helps preserve appearance and surface integrity over time. This part number, JBR1796XPR, is listed for rear fitment on 2019-2023 Nissan Altima and 2021 Nissan Kicks applications, including 2022 Nissan Altima models with a power operated parking brake. This part cross-references Nissan 43206-6CA1A for the same application.
What It Helps Address
- Brake fade during repeated stops or higher-heat driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or damaged rear rotors
- Noise or vibration related to rotor wear when replacement is due
Installation Notes and Tips
Compatible With 2019-2023 Nissan Altima, rear; 2021 Nissan Kicks, rear. Verify rotor dimensions, hub fitment, and parking brake configuration before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during service. Follow the vehicle manufacturer’s brake service procedures and torque specifications for final assembly.
Quality Assurance
PowerStop manufactures this rotor with OE-style fitment and corrosion-resistant zinc plating for dependable service on the listed Nissan Altima and Nissan Kicks rear applications. JBR1796XPR is built to match the specified dimensions and mounting pattern for direct replacement use.
PowerStop JBR1796XPR Disc Brake Rotor Set - Rear
Rear Brake Rotor Upgrade for Nissan Altima and Kicks
PowerStop JBR1796XPR is a rear disc brake rotor set built for direct OE fitment on select Nissan applications. It combines drilled and slotted rotor surfaces with zinc plating to support cooler operation, cleaner pad contact, and corrosion resistance in everyday driving and demanding stops.
Key Features
- Drilled and slotted surface helps move heat, dust, gas, and moisture away from the braking surface
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the listed rear applications
- Solid rotor design with a 11.02 in. outside diameter
- 5-lug, 114.30 mm bolt circle specification
- Nominal thickness: 0.38 in. / 9.60 mm; discard thickness: 0.34 in. / 8.60 mm
Product Details
The Power Stop rear drilled, slotted and zinc plated brake rotor pair is engineered for drivers who want a service replacement with added thermal management and surface cleaning features. The cross-drilled pattern supports heat dissipation, while the rounded slots help clear gases, dust, and moisture from the rotor face to maintain consistent pad contact. The zinc dichromate finish adds a rust-resistant layer that helps preserve appearance and surface integrity over time. This part number, JBR1796XPR, is listed for rear fitment on 2019-2023 Nissan Altima and 2021 Nissan Kicks applications, including 2022 Nissan Altima models with a power operated parking brake. This part cross-references Nissan 43206-6CA1A for the same application.
What It Helps Address
- Brake fade during repeated stops or higher-heat driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or damaged rear rotors
- Noise or vibration related to rotor wear when replacement is due
Installation Notes and Tips
Compatible With 2019-2023 Nissan Altima, rear; 2021 Nissan Kicks, rear. Verify rotor dimensions, hub fitment, and parking brake configuration before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during service. Follow the vehicle manufacturer’s brake service procedures and torque specifications for final assembly.
Quality Assurance
PowerStop manufactures this rotor with OE-style fitment and corrosion-resistant zinc plating for dependable service on the listed Nissan Altima and Nissan Kicks rear applications. JBR1796XPR is built to match the specified dimensions and mounting pattern for direct replacement use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Rotor Upgrade for Nissan Altima and Kicks
PowerStop JBR1796XPR is a rear disc brake rotor set built for direct OE fitment on select Nissan applications. It combines drilled and slotted rotor surfaces with zinc plating to support cooler operation, cleaner pad contact, and corrosion resistance in everyday driving and demanding stops.
Key Features
- Drilled and slotted surface helps move heat, dust, gas, and moisture away from the braking surface
- Silver zinc dichromate plating helps resist rust and corrosion
- Direct OE fit for straightforward replacement on the listed rear applications
- Solid rotor design with a 11.02 in. outside diameter
- 5-lug, 114.30 mm bolt circle specification
- Nominal thickness: 0.38 in. / 9.60 mm; discard thickness: 0.34 in. / 8.60 mm
Product Details
The Power Stop rear drilled, slotted and zinc plated brake rotor pair is engineered for drivers who want a service replacement with added thermal management and surface cleaning features. The cross-drilled pattern supports heat dissipation, while the rounded slots help clear gases, dust, and moisture from the rotor face to maintain consistent pad contact. The zinc dichromate finish adds a rust-resistant layer that helps preserve appearance and surface integrity over time. This part number, JBR1796XPR, is listed for rear fitment on 2019-2023 Nissan Altima and 2021 Nissan Kicks applications, including 2022 Nissan Altima models with a power operated parking brake. This part cross-references Nissan 43206-6CA1A for the same application.
What It Helps Address
- Brake fade during repeated stops or higher-heat driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or damaged rear rotors
- Noise or vibration related to rotor wear when replacement is due
Installation Notes and Tips
Compatible With 2019-2023 Nissan Altima, rear; 2021 Nissan Kicks, rear. Verify rotor dimensions, hub fitment, and parking brake configuration before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during service. Follow the vehicle manufacturer’s brake service procedures and torque specifications for final assembly.
Quality Assurance
PowerStop manufactures this rotor with OE-style fitment and corrosion-resistant zinc plating for dependable service on the listed Nissan Altima and Nissan Kicks rear applications. JBR1796XPR is built to match the specified dimensions and mounting pattern for direct replacement use.
