PowerStop JBR914XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Brake Rotor Upgrade
Power Stop JBR914XPR is a front disc brake rotor set built for the 2000-2009 Honda S2000. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in daily driving or demanding conditions.
Compatible with 2000-2009 Honda S2000 front brake applications, this rotor set is a direct OE-fit replacement with no special modifications required. The Power Stop front drilled, slotted and zinc plated brake rotor pair is engineered for drivers who want a straightforward brake upgrade with a performance-focused surface design.
Key Features
- Fits 2000-2009 Honda S2000, front
- Power Stop part number JBR914XPR
- Cross-drilled rotor face helps promote heat dissipation
- Rounded slots help clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and corrosion
- Vented rotor design supports brake cooling
- Direct OE fit for straightforward replacement
- Outside diameter: 11.80 in. / 300.00 mm
- Nominal thickness: 0.91 in. / 23.00 mm
- Mounting bolt hole circle diameter: 4.50 in. / 114.30 mm
- 5-lug mounting pattern
Product Details
Power Stop JBR914XPR uses a slotted X drilled surface type to help maintain a consistent friction contact patch under braking. The vented rotor construction supports airflow through the rotor body, while the zinc-plated finish adds a layer of protection against surface rust. This makes it a practical choice for Honda S2000 owners looking for a front rotor replacement with a performance-oriented design and OE-style fitment.
This part cross-references Centric Parts 120.40048 for the same application.
Common Brake Issues It Can Address
- Brake fade during repeated stops or higher-temperature driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or heat-affected rotors
- Reduced braking consistency from aging front rotors
Installation Notes and Tips
Install JBR914XPR on the front axle only for the listed Honda S2000 applications. Verify rotor dimensions, hub fit, and pad condition before installation, and inspect calipers, slides, and brake fluid condition while servicing the front brakes. Follow the vehicle service manual for torque specifications and bedding procedures after installation.
Quality Assurance
Power Stop manufactures this rotor pair with precision drilling, slotting, and zinc plating to support consistent performance and corrosion resistance. The direct OE-fit design is intended to simplify replacement on the 2000-2009 Honda S2000 front brake system.
Original: $192.07
-65%$192.07
$67.22PowerStop JBR914XPR Disc Brake Rotor Set - Front
Front Drilled and Slotted Brake Rotor Upgrade
Power Stop JBR914XPR is a front disc brake rotor set built for the 2000-2009 Honda S2000. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in daily driving or demanding conditions.
Compatible with 2000-2009 Honda S2000 front brake applications, this rotor set is a direct OE-fit replacement with no special modifications required. The Power Stop front drilled, slotted and zinc plated brake rotor pair is engineered for drivers who want a straightforward brake upgrade with a performance-focused surface design.
Key Features
- Fits 2000-2009 Honda S2000, front
- Power Stop part number JBR914XPR
- Cross-drilled rotor face helps promote heat dissipation
- Rounded slots help clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and corrosion
- Vented rotor design supports brake cooling
- Direct OE fit for straightforward replacement
- Outside diameter: 11.80 in. / 300.00 mm
- Nominal thickness: 0.91 in. / 23.00 mm
- Mounting bolt hole circle diameter: 4.50 in. / 114.30 mm
- 5-lug mounting pattern
Product Details
Power Stop JBR914XPR uses a slotted X drilled surface type to help maintain a consistent friction contact patch under braking. The vented rotor construction supports airflow through the rotor body, while the zinc-plated finish adds a layer of protection against surface rust. This makes it a practical choice for Honda S2000 owners looking for a front rotor replacement with a performance-oriented design and OE-style fitment.
This part cross-references Centric Parts 120.40048 for the same application.
Common Brake Issues It Can Address
- Brake fade during repeated stops or higher-temperature driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or heat-affected rotors
- Reduced braking consistency from aging front rotors
Installation Notes and Tips
Install JBR914XPR on the front axle only for the listed Honda S2000 applications. Verify rotor dimensions, hub fit, and pad condition before installation, and inspect calipers, slides, and brake fluid condition while servicing the front brakes. Follow the vehicle service manual for torque specifications and bedding procedures after installation.
Quality Assurance
Power Stop manufactures this rotor pair with precision drilling, slotting, and zinc plating to support consistent performance and corrosion resistance. The direct OE-fit design is intended to simplify replacement on the 2000-2009 Honda S2000 front brake system.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drilled and Slotted Brake Rotor Upgrade
Power Stop JBR914XPR is a front disc brake rotor set built for the 2000-2009 Honda S2000. It combines cross-drilled holes, rounded slots, and a zinc-plated finish to support cooler braking, cleaner pad contact, and corrosion resistance in daily driving or demanding conditions.
Compatible with 2000-2009 Honda S2000 front brake applications, this rotor set is a direct OE-fit replacement with no special modifications required. The Power Stop front drilled, slotted and zinc plated brake rotor pair is engineered for drivers who want a straightforward brake upgrade with a performance-focused surface design.
Key Features
- Fits 2000-2009 Honda S2000, front
- Power Stop part number JBR914XPR
- Cross-drilled rotor face helps promote heat dissipation
- Rounded slots help clear gas, dust, and moisture from the friction surface
- Silver zinc dichromate coating helps resist rust and corrosion
- Vented rotor design supports brake cooling
- Direct OE fit for straightforward replacement
- Outside diameter: 11.80 in. / 300.00 mm
- Nominal thickness: 0.91 in. / 23.00 mm
- Mounting bolt hole circle diameter: 4.50 in. / 114.30 mm
- 5-lug mounting pattern
Product Details
Power Stop JBR914XPR uses a slotted X drilled surface type to help maintain a consistent friction contact patch under braking. The vented rotor construction supports airflow through the rotor body, while the zinc-plated finish adds a layer of protection against surface rust. This makes it a practical choice for Honda S2000 owners looking for a front rotor replacement with a performance-oriented design and OE-style fitment.
This part cross-references Centric Parts 120.40048 for the same application.
Common Brake Issues It Can Address
- Brake fade during repeated stops or higher-temperature driving
- Surface rust on exposed rotor faces
- Dust and moisture buildup on the braking surface
- Uneven pad contact caused by worn or heat-affected rotors
- Reduced braking consistency from aging front rotors
Installation Notes and Tips
Install JBR914XPR on the front axle only for the listed Honda S2000 applications. Verify rotor dimensions, hub fit, and pad condition before installation, and inspect calipers, slides, and brake fluid condition while servicing the front brakes. Follow the vehicle service manual for torque specifications and bedding procedures after installation.
Quality Assurance
Power Stop manufactures this rotor pair with precision drilling, slotting, and zinc plating to support consistent performance and corrosion resistance. The direct OE-fit design is intended to simplify replacement on the 2000-2009 Honda S2000 front brake system.
