PowerStop JBR926 Disc Brake Rotor - Rear
Rear OE Replacement Rotor for Acura TL
Power Stop JBR926 is a rear disc brake rotor built as a direct-fit OE stock replacement for 1999-2003 Acura TL applications. It matches the original equipment style for rear brake service and supports consistent braking performance on the vehicle it was made for.
For shoppers searching for a rear brake rotor for 1999-2003 Acura TL, Power Stop JBR926 provides the correct fitment profile for rear axle replacement work. The rotor uses a solid design with a 11.10-inch outside diameter, 5-lug mounting pattern, and 114.30 mm bolt circle diameter.
Key Features
- Direct-fit rear OE stock replacement brake rotor
- Fits 1999-2003 Acura TL, rear
- Solid rotor construction for rear brake applications
- 11.10 in. outside diameter and 2.30 in. overall height
- 5 stud/lug holes with 114.30 mm bolt circle diameter
- Nominal thickness: 0.35 in. / 9.00 mm
- Discard thickness: 0.30 in. / 7.50 mm
Product Line Details
Power Stop Autospecialty rotors are positioned as OE-style replacement parts for drivers who want factory-fit dimensions and original-equipment performance characteristics. JBR926 follows that approach with a rear solid rotor format for Acura TL brake service.
Detailed Description
Power Stop JBR926 is a rear disc brake rotor for 1999-2003 Acura TL models. It is engineered as an OE stock replacement, making it a straightforward choice for rear brake maintenance when the original rotor is worn, below thickness specification, or showing braking surface damage. The rotor’s solid design, 11.10-inch diameter, and 5-lug, 114.30 mm bolt pattern align with the vehicle’s rear brake setup.
This part number, JBR926, is a practical option for Acura TL rear brake rotor replacement, rear brake vibration correction, and restoring proper rotor thickness during brake service. JBR926 is also a useful search term for buyers looking for a rear OE replacement rotor for 1999-2003 Acura TL, rear.
Common Issues This Rotor Can Address
- Rear brake pulsation caused by rotor wear or uneven surfaces
- Brake noise related to worn or damaged rear rotors
- Reduced braking consistency from rotors below service thickness
- Corrosion or scoring on the rear braking surface
- Need for an OE-style rear rotor replacement on Acura TL models
Installation Notes and Tips
Confirm rear fitment before ordering: this rotor fits 1999-2003 Acura TL, rear. Verify rotor dimensions, bolt circle diameter, and hub match during brake service. Inspect pads, caliper condition, and hub surfaces before installation so the new rotor seats correctly and the braking system can be serviced as a complete rear brake assembly.
Part number JBR926 should be matched to the vehicle’s rear application only. If you are replacing both rear rotors, compare the existing rotor thickness and condition to the listed nominal and discard measurements before reuse decisions are made.
Quality Assurance
Power Stop markets this rotor as a direct-fit OE replacement within its Autospecialty line, with dimensions and construction intended to follow original equipment fitment for the listed Acura TL applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $60.13
-65%$60.13
$21.05PowerStop JBR926 Disc Brake Rotor - Rear
Rear OE Replacement Rotor for Acura TL
Power Stop JBR926 is a rear disc brake rotor built as a direct-fit OE stock replacement for 1999-2003 Acura TL applications. It matches the original equipment style for rear brake service and supports consistent braking performance on the vehicle it was made for.
For shoppers searching for a rear brake rotor for 1999-2003 Acura TL, Power Stop JBR926 provides the correct fitment profile for rear axle replacement work. The rotor uses a solid design with a 11.10-inch outside diameter, 5-lug mounting pattern, and 114.30 mm bolt circle diameter.
Key Features
- Direct-fit rear OE stock replacement brake rotor
- Fits 1999-2003 Acura TL, rear
- Solid rotor construction for rear brake applications
- 11.10 in. outside diameter and 2.30 in. overall height
- 5 stud/lug holes with 114.30 mm bolt circle diameter
- Nominal thickness: 0.35 in. / 9.00 mm
- Discard thickness: 0.30 in. / 7.50 mm
Product Line Details
Power Stop Autospecialty rotors are positioned as OE-style replacement parts for drivers who want factory-fit dimensions and original-equipment performance characteristics. JBR926 follows that approach with a rear solid rotor format for Acura TL brake service.
Detailed Description
Power Stop JBR926 is a rear disc brake rotor for 1999-2003 Acura TL models. It is engineered as an OE stock replacement, making it a straightforward choice for rear brake maintenance when the original rotor is worn, below thickness specification, or showing braking surface damage. The rotor’s solid design, 11.10-inch diameter, and 5-lug, 114.30 mm bolt pattern align with the vehicle’s rear brake setup.
This part number, JBR926, is a practical option for Acura TL rear brake rotor replacement, rear brake vibration correction, and restoring proper rotor thickness during brake service. JBR926 is also a useful search term for buyers looking for a rear OE replacement rotor for 1999-2003 Acura TL, rear.
Common Issues This Rotor Can Address
- Rear brake pulsation caused by rotor wear or uneven surfaces
- Brake noise related to worn or damaged rear rotors
- Reduced braking consistency from rotors below service thickness
- Corrosion or scoring on the rear braking surface
- Need for an OE-style rear rotor replacement on Acura TL models
Installation Notes and Tips
Confirm rear fitment before ordering: this rotor fits 1999-2003 Acura TL, rear. Verify rotor dimensions, bolt circle diameter, and hub match during brake service. Inspect pads, caliper condition, and hub surfaces before installation so the new rotor seats correctly and the braking system can be serviced as a complete rear brake assembly.
Part number JBR926 should be matched to the vehicle’s rear application only. If you are replacing both rear rotors, compare the existing rotor thickness and condition to the listed nominal and discard measurements before reuse decisions are made.
Quality Assurance
Power Stop markets this rotor as a direct-fit OE replacement within its Autospecialty line, with dimensions and construction intended to follow original equipment fitment for the listed Acura TL applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear OE Replacement Rotor for Acura TL
Power Stop JBR926 is a rear disc brake rotor built as a direct-fit OE stock replacement for 1999-2003 Acura TL applications. It matches the original equipment style for rear brake service and supports consistent braking performance on the vehicle it was made for.
For shoppers searching for a rear brake rotor for 1999-2003 Acura TL, Power Stop JBR926 provides the correct fitment profile for rear axle replacement work. The rotor uses a solid design with a 11.10-inch outside diameter, 5-lug mounting pattern, and 114.30 mm bolt circle diameter.
Key Features
- Direct-fit rear OE stock replacement brake rotor
- Fits 1999-2003 Acura TL, rear
- Solid rotor construction for rear brake applications
- 11.10 in. outside diameter and 2.30 in. overall height
- 5 stud/lug holes with 114.30 mm bolt circle diameter
- Nominal thickness: 0.35 in. / 9.00 mm
- Discard thickness: 0.30 in. / 7.50 mm
Product Line Details
Power Stop Autospecialty rotors are positioned as OE-style replacement parts for drivers who want factory-fit dimensions and original-equipment performance characteristics. JBR926 follows that approach with a rear solid rotor format for Acura TL brake service.
Detailed Description
Power Stop JBR926 is a rear disc brake rotor for 1999-2003 Acura TL models. It is engineered as an OE stock replacement, making it a straightforward choice for rear brake maintenance when the original rotor is worn, below thickness specification, or showing braking surface damage. The rotor’s solid design, 11.10-inch diameter, and 5-lug, 114.30 mm bolt pattern align with the vehicle’s rear brake setup.
This part number, JBR926, is a practical option for Acura TL rear brake rotor replacement, rear brake vibration correction, and restoring proper rotor thickness during brake service. JBR926 is also a useful search term for buyers looking for a rear OE replacement rotor for 1999-2003 Acura TL, rear.
Common Issues This Rotor Can Address
- Rear brake pulsation caused by rotor wear or uneven surfaces
- Brake noise related to worn or damaged rear rotors
- Reduced braking consistency from rotors below service thickness
- Corrosion or scoring on the rear braking surface
- Need for an OE-style rear rotor replacement on Acura TL models
Installation Notes and Tips
Confirm rear fitment before ordering: this rotor fits 1999-2003 Acura TL, rear. Verify rotor dimensions, bolt circle diameter, and hub match during brake service. Inspect pads, caliper condition, and hub surfaces before installation so the new rotor seats correctly and the braking system can be serviced as a complete rear brake assembly.
Part number JBR926 should be matched to the vehicle’s rear application only. If you are replacing both rear rotors, compare the existing rotor thickness and condition to the listed nominal and discard measurements before reuse decisions are made.
Quality Assurance
Power Stop markets this rotor as a direct-fit OE replacement within its Autospecialty line, with dimensions and construction intended to follow original equipment fitment for the listed Acura TL applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
