PowerStop S2570 Disc Brake Caliper Set - Rear
Rear Brake Caliper Set for Audi and Volkswagen
PowerStop S2570 is a rear disc brake caliper set built for select Audi TT, Audi A3, Volkswagen Beetle, Volkswagen Golf, and Volkswagen Jetta applications. It replaces the original rear calipers with a direct-fit floating design and a red powder-coated finish that stands out behind stock or custom wheels.
PowerStop remanufactures these calipers and brackets in Chicago, IL, then pressure tests each unit to verify piston operation and check for leaks. The result is a rear brake caliper assembly focused on fitment, corrosion resistance, and consistent braking performance.
Key Features
- Part number S2570 rear disc brake caliper set
- Direct replacement for select rear brake applications
- Floating caliper design with 1 steel piston
- Aluminum caliper body with red high-heat powder coating
- Caliper slides included; mounting bracket included
- New pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips used in assembly
- High-temperature EPDM rubber dust boots and silicone lubricant for smoother operation
Detailed Description
PowerStop Performance Brake Calipers are built for drivers who want a direct OE-style rear caliper replacement with added corrosion protection and a cleaner appearance. The red powder-coated finish helps resist rust and brake dust buildup, while the remanufactured aluminum housing and steel piston support dependable rear brake function. This S2570 caliper set is a practical choice for Audi TT rear brake caliper replacement, Audi A3 rear brake caliper replacement, and Volkswagen rear brake caliper service where the original unit has worn, seized, or begun leaking.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Rear brake drag caused by sticking caliper slides or piston movement issues
- Brake fluid leaks from worn seals or damaged bleeder components
- Uneven rear braking from a worn or corroded caliper assembly
- Rust and corrosion on exposed brake hardware
- Faded appearance behind open wheels on Audi and Volkswagen models
Installation Notes and Fitment
Fits 1998 Audi A3, rear. Fits 1999 Audi A3, rear, from CH# 8LX200000. Fits 2000 Audi TT, rear, to VIN #8N-Y-011 100. Fits 1998-1999 Volkswagen Beetle, rear. Fits 2000 Volkswagen Beetle, rear, to VIN #1C_Y-030-000. Fits 1999 Volkswagen Golf, rear, from 12/98; New Body Style. Fits 2000 Volkswagen Jetta, rear.
Verify VIN or chassis breakpoints before ordering, since several applications are limited by production date. Transfer only the components required by the vehicle configuration and confirm proper brake bleeding after installation. Part number S2570 is a rear floating caliper assembly with bracket and slides included.
Quality Assurance
PowerStop remanufactures the calipers and brackets in its Chicago, IL facility and pressure tests each unit to confirm piston operation and help prevent leaks. The assembly uses new internal wear components, high-temperature dust boots, and stainless steel pad abutment clips for consistent service quality.
PowerStop S2570 Disc Brake Caliper Set - Rear
Rear Brake Caliper Set for Audi and Volkswagen
PowerStop S2570 is a rear disc brake caliper set built for select Audi TT, Audi A3, Volkswagen Beetle, Volkswagen Golf, and Volkswagen Jetta applications. It replaces the original rear calipers with a direct-fit floating design and a red powder-coated finish that stands out behind stock or custom wheels.
PowerStop remanufactures these calipers and brackets in Chicago, IL, then pressure tests each unit to verify piston operation and check for leaks. The result is a rear brake caliper assembly focused on fitment, corrosion resistance, and consistent braking performance.
Key Features
- Part number S2570 rear disc brake caliper set
- Direct replacement for select rear brake applications
- Floating caliper design with 1 steel piston
- Aluminum caliper body with red high-heat powder coating
- Caliper slides included; mounting bracket included
- New pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips used in assembly
- High-temperature EPDM rubber dust boots and silicone lubricant for smoother operation
Detailed Description
PowerStop Performance Brake Calipers are built for drivers who want a direct OE-style rear caliper replacement with added corrosion protection and a cleaner appearance. The red powder-coated finish helps resist rust and brake dust buildup, while the remanufactured aluminum housing and steel piston support dependable rear brake function. This S2570 caliper set is a practical choice for Audi TT rear brake caliper replacement, Audi A3 rear brake caliper replacement, and Volkswagen rear brake caliper service where the original unit has worn, seized, or begun leaking.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Rear brake drag caused by sticking caliper slides or piston movement issues
- Brake fluid leaks from worn seals or damaged bleeder components
- Uneven rear braking from a worn or corroded caliper assembly
- Rust and corrosion on exposed brake hardware
- Faded appearance behind open wheels on Audi and Volkswagen models
Installation Notes and Fitment
Fits 1998 Audi A3, rear. Fits 1999 Audi A3, rear, from CH# 8LX200000. Fits 2000 Audi TT, rear, to VIN #8N-Y-011 100. Fits 1998-1999 Volkswagen Beetle, rear. Fits 2000 Volkswagen Beetle, rear, to VIN #1C_Y-030-000. Fits 1999 Volkswagen Golf, rear, from 12/98; New Body Style. Fits 2000 Volkswagen Jetta, rear.
Verify VIN or chassis breakpoints before ordering, since several applications are limited by production date. Transfer only the components required by the vehicle configuration and confirm proper brake bleeding after installation. Part number S2570 is a rear floating caliper assembly with bracket and slides included.
Quality Assurance
PowerStop remanufactures the calipers and brackets in its Chicago, IL facility and pressure tests each unit to confirm piston operation and help prevent leaks. The assembly uses new internal wear components, high-temperature dust boots, and stainless steel pad abutment clips for consistent service quality.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Caliper Set for Audi and Volkswagen
PowerStop S2570 is a rear disc brake caliper set built for select Audi TT, Audi A3, Volkswagen Beetle, Volkswagen Golf, and Volkswagen Jetta applications. It replaces the original rear calipers with a direct-fit floating design and a red powder-coated finish that stands out behind stock or custom wheels.
PowerStop remanufactures these calipers and brackets in Chicago, IL, then pressure tests each unit to verify piston operation and check for leaks. The result is a rear brake caliper assembly focused on fitment, corrosion resistance, and consistent braking performance.
Key Features
- Part number S2570 rear disc brake caliper set
- Direct replacement for select rear brake applications
- Floating caliper design with 1 steel piston
- Aluminum caliper body with red high-heat powder coating
- Caliper slides included; mounting bracket included
- New pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips used in assembly
- High-temperature EPDM rubber dust boots and silicone lubricant for smoother operation
Detailed Description
PowerStop Performance Brake Calipers are built for drivers who want a direct OE-style rear caliper replacement with added corrosion protection and a cleaner appearance. The red powder-coated finish helps resist rust and brake dust buildup, while the remanufactured aluminum housing and steel piston support dependable rear brake function. This S2570 caliper set is a practical choice for Audi TT rear brake caliper replacement, Audi A3 rear brake caliper replacement, and Volkswagen rear brake caliper service where the original unit has worn, seized, or begun leaking.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Rear brake drag caused by sticking caliper slides or piston movement issues
- Brake fluid leaks from worn seals or damaged bleeder components
- Uneven rear braking from a worn or corroded caliper assembly
- Rust and corrosion on exposed brake hardware
- Faded appearance behind open wheels on Audi and Volkswagen models
Installation Notes and Fitment
Fits 1998 Audi A3, rear. Fits 1999 Audi A3, rear, from CH# 8LX200000. Fits 2000 Audi TT, rear, to VIN #8N-Y-011 100. Fits 1998-1999 Volkswagen Beetle, rear. Fits 2000 Volkswagen Beetle, rear, to VIN #1C_Y-030-000. Fits 1999 Volkswagen Golf, rear, from 12/98; New Body Style. Fits 2000 Volkswagen Jetta, rear.
Verify VIN or chassis breakpoints before ordering, since several applications are limited by production date. Transfer only the components required by the vehicle configuration and confirm proper brake bleeding after installation. Part number S2570 is a rear floating caliper assembly with bracket and slides included.
Quality Assurance
PowerStop remanufactures the calipers and brackets in its Chicago, IL facility and pressure tests each unit to confirm piston operation and help prevent leaks. The assembly uses new internal wear components, high-temperature dust boots, and stainless steel pad abutment clips for consistent service quality.
