PowerStop S3224 Disc Brake Caliper Set - Rear
Rear Brake Caliper Set for Subaru Legacy and Outback
PowerStop S3224 is a rear disc brake caliper set built for 2006-2009 Subaru Legacy and 2006-2009 Subaru Outback applications. It replaces the stock rear calipers with a direct-fit design and a high-heat red powder-coated finish that stands out behind the wheels.
PowerStop Performance Brake Calipers are remanufactured in Chicago, IL and assembled with new internal components for consistent operation. The rear caliper design uses an aluminum casting, a floating caliper layout, a 38.07 mm steel piston, and included slides and mounting bracket for the listed applications.
Key Features
- Part number S3224 rear disc brake caliper set
- Fits 2006-2009 Subaru Legacy, rear
- Fits 2006-2009 Subaru Outback, rear
- High-temperature red powder-coated finish for corrosion resistance
- Aluminum caliper casting with floating caliper design
- 38.07 mm steel piston
- Caliper slides included
- Mounting bracket included
- Pressure tested to verify piston operation and check for leaks
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips
Product Details
PowerStop S3224 is part of the PowerStop Rear High-Heat Red Powder Coated Brake Calipers line, a performance-focused caliper program for drivers who want direct replacement fitment with upgraded finish and rebuilt internals. For Subaru Legacy and Subaru Outback rear brake service, this caliper set is built to bolt into the stock location and maintain proper brake function while improving resistance to rust and corrosion. The red powder-coated surface is easy to clean and gives the rear brake assembly a more finished appearance behind stock or custom wheels.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Rear caliper sticking or uneven piston movement
- Brake fluid leakage from worn internal seals
- Corrosion on the caliper body or bracket
- Reduced brake response from worn slide hardware
- Cosmetic wear on visible rear brake components
Installation Notes and Tips
Verify rear fitment by year, make, model, and position before installation. Inspect brake pads, rotors, and brake hoses during service, and confirm the caliper slides move freely after installation. Bleed the brake system according to factory procedure after caliper replacement.
Quality Assurance
Each PowerStop caliper is pressure tested to confirm piston operation and help identify leaks before it leaves the remanufacturing process. The caliper and bracket are remanufactured in Chicago, IL using new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips for the listed Subaru Legacy and Subaru Outback rear applications.
PowerStop S3224 Disc Brake Caliper Set - Rear
Rear Brake Caliper Set for Subaru Legacy and Outback
PowerStop S3224 is a rear disc brake caliper set built for 2006-2009 Subaru Legacy and 2006-2009 Subaru Outback applications. It replaces the stock rear calipers with a direct-fit design and a high-heat red powder-coated finish that stands out behind the wheels.
PowerStop Performance Brake Calipers are remanufactured in Chicago, IL and assembled with new internal components for consistent operation. The rear caliper design uses an aluminum casting, a floating caliper layout, a 38.07 mm steel piston, and included slides and mounting bracket for the listed applications.
Key Features
- Part number S3224 rear disc brake caliper set
- Fits 2006-2009 Subaru Legacy, rear
- Fits 2006-2009 Subaru Outback, rear
- High-temperature red powder-coated finish for corrosion resistance
- Aluminum caliper casting with floating caliper design
- 38.07 mm steel piston
- Caliper slides included
- Mounting bracket included
- Pressure tested to verify piston operation and check for leaks
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips
Product Details
PowerStop S3224 is part of the PowerStop Rear High-Heat Red Powder Coated Brake Calipers line, a performance-focused caliper program for drivers who want direct replacement fitment with upgraded finish and rebuilt internals. For Subaru Legacy and Subaru Outback rear brake service, this caliper set is built to bolt into the stock location and maintain proper brake function while improving resistance to rust and corrosion. The red powder-coated surface is easy to clean and gives the rear brake assembly a more finished appearance behind stock or custom wheels.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Rear caliper sticking or uneven piston movement
- Brake fluid leakage from worn internal seals
- Corrosion on the caliper body or bracket
- Reduced brake response from worn slide hardware
- Cosmetic wear on visible rear brake components
Installation Notes and Tips
Verify rear fitment by year, make, model, and position before installation. Inspect brake pads, rotors, and brake hoses during service, and confirm the caliper slides move freely after installation. Bleed the brake system according to factory procedure after caliper replacement.
Quality Assurance
Each PowerStop caliper is pressure tested to confirm piston operation and help identify leaks before it leaves the remanufacturing process. The caliper and bracket are remanufactured in Chicago, IL using new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips for the listed Subaru Legacy and Subaru Outback rear applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Caliper Set for Subaru Legacy and Outback
PowerStop S3224 is a rear disc brake caliper set built for 2006-2009 Subaru Legacy and 2006-2009 Subaru Outback applications. It replaces the stock rear calipers with a direct-fit design and a high-heat red powder-coated finish that stands out behind the wheels.
PowerStop Performance Brake Calipers are remanufactured in Chicago, IL and assembled with new internal components for consistent operation. The rear caliper design uses an aluminum casting, a floating caliper layout, a 38.07 mm steel piston, and included slides and mounting bracket for the listed applications.
Key Features
- Part number S3224 rear disc brake caliper set
- Fits 2006-2009 Subaru Legacy, rear
- Fits 2006-2009 Subaru Outback, rear
- High-temperature red powder-coated finish for corrosion resistance
- Aluminum caliper casting with floating caliper design
- 38.07 mm steel piston
- Caliper slides included
- Mounting bracket included
- Pressure tested to verify piston operation and check for leaks
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips
Product Details
PowerStop S3224 is part of the PowerStop Rear High-Heat Red Powder Coated Brake Calipers line, a performance-focused caliper program for drivers who want direct replacement fitment with upgraded finish and rebuilt internals. For Subaru Legacy and Subaru Outback rear brake service, this caliper set is built to bolt into the stock location and maintain proper brake function while improving resistance to rust and corrosion. The red powder-coated surface is easy to clean and gives the rear brake assembly a more finished appearance behind stock or custom wheels.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Rear caliper sticking or uneven piston movement
- Brake fluid leakage from worn internal seals
- Corrosion on the caliper body or bracket
- Reduced brake response from worn slide hardware
- Cosmetic wear on visible rear brake components
Installation Notes and Tips
Verify rear fitment by year, make, model, and position before installation. Inspect brake pads, rotors, and brake hoses during service, and confirm the caliper slides move freely after installation. Bleed the brake system according to factory procedure after caliper replacement.
Quality Assurance
Each PowerStop caliper is pressure tested to confirm piston operation and help identify leaks before it leaves the remanufacturing process. The caliper and bracket are remanufactured in Chicago, IL using new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips for the listed Subaru Legacy and Subaru Outback rear applications.
