PowerStop S3436 Disc Brake Caliper Set - Rear
Rear Brake Caliper Set for Nissan Rogue and X-Trail
PowerStop S3436 is a rear disc brake caliper set built for Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail applications. It uses a floating caliper design with a 34.80 mm steel piston, red powder-coated cast iron housing, and a direct-fit bracket for a straightforward OE-style replacement.
PowerStop’s Rear High-Heat Red Powder Coated Brake Calipers line focuses on remanufactured performance calipers that bolt in place of the original unit and are finished for corrosion resistance. For drivers searching for a rear brake caliper for 2008-2013 Nissan Rogue or a rear caliper replacement for 2017-2019 Nissan Rogue Sport, this line combines fitment-specific engineering with a clean, visible red finish.
- Part number S3436 rear disc brake caliper set
- Fits rear brake applications on Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail
- Floating caliper design with one 34.80 mm steel piston
- Cast iron caliper body with high-temperature red powder coating
- Bracket included; caliper slides included
- Remanufactured and pressure tested for piston operation and leak prevention
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel pad abutment clips
Built for Rear Brake Service
PowerStop S3436 is remanufactured in Chicago, IL and treated with an electrostatic high-temperature red powder coat to help resist rust and corrosion. The caliper uses high-temperature EPDM rubber dust boots and premium silicone lubricant for smoother movement in demanding conditions. This rear caliper assembly is a direct replacement for the stock unit on 2005-2006 Nissan X-Trail, 2008-2013 Nissan Rogue, 2014-2015 Nissan Rogue Select, and 2017-2019 Nissan Rogue Sport, including the 2019 Rogue Sport rear application with manual parking brake notes.
Common Problems This Part Can Address
- Rear brake drag caused by worn caliper slides or piston components
- Brake fluid leaks from aging seals or bleeder hardware
- Uneven rear pad wear from a sticking floating caliper
- Corrosion on the caliper body and bracket
- Reduced rear brake response from a damaged or seized caliper assembly
Installation Notes
Verify rear fitment by year, model, and brake configuration before installation. This part includes the mounting bracket and caliper slides, but mounting hardware is not listed as included. Inspect brake pads, rotors, and brake fluid condition during service, and bleed the hydraulic system after installation. The part number S3436 should be matched to the vehicle’s rear brake setup, especially on 2019 Nissan Rogue Sport models with manual parking brake notes.
Quality Assurance
Each PowerStop caliper is 100% pressure tested to confirm piston operation and check for leaks. The remanufacturing process uses new internal components and corrosion-resistant finishing to support consistent rear brake performance on Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail applications.
PowerStop S3436 Disc Brake Caliper Set - Rear
Rear Brake Caliper Set for Nissan Rogue and X-Trail
PowerStop S3436 is a rear disc brake caliper set built for Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail applications. It uses a floating caliper design with a 34.80 mm steel piston, red powder-coated cast iron housing, and a direct-fit bracket for a straightforward OE-style replacement.
PowerStop’s Rear High-Heat Red Powder Coated Brake Calipers line focuses on remanufactured performance calipers that bolt in place of the original unit and are finished for corrosion resistance. For drivers searching for a rear brake caliper for 2008-2013 Nissan Rogue or a rear caliper replacement for 2017-2019 Nissan Rogue Sport, this line combines fitment-specific engineering with a clean, visible red finish.
- Part number S3436 rear disc brake caliper set
- Fits rear brake applications on Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail
- Floating caliper design with one 34.80 mm steel piston
- Cast iron caliper body with high-temperature red powder coating
- Bracket included; caliper slides included
- Remanufactured and pressure tested for piston operation and leak prevention
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel pad abutment clips
Built for Rear Brake Service
PowerStop S3436 is remanufactured in Chicago, IL and treated with an electrostatic high-temperature red powder coat to help resist rust and corrosion. The caliper uses high-temperature EPDM rubber dust boots and premium silicone lubricant for smoother movement in demanding conditions. This rear caliper assembly is a direct replacement for the stock unit on 2005-2006 Nissan X-Trail, 2008-2013 Nissan Rogue, 2014-2015 Nissan Rogue Select, and 2017-2019 Nissan Rogue Sport, including the 2019 Rogue Sport rear application with manual parking brake notes.
Common Problems This Part Can Address
- Rear brake drag caused by worn caliper slides or piston components
- Brake fluid leaks from aging seals or bleeder hardware
- Uneven rear pad wear from a sticking floating caliper
- Corrosion on the caliper body and bracket
- Reduced rear brake response from a damaged or seized caliper assembly
Installation Notes
Verify rear fitment by year, model, and brake configuration before installation. This part includes the mounting bracket and caliper slides, but mounting hardware is not listed as included. Inspect brake pads, rotors, and brake fluid condition during service, and bleed the hydraulic system after installation. The part number S3436 should be matched to the vehicle’s rear brake setup, especially on 2019 Nissan Rogue Sport models with manual parking brake notes.
Quality Assurance
Each PowerStop caliper is 100% pressure tested to confirm piston operation and check for leaks. The remanufacturing process uses new internal components and corrosion-resistant finishing to support consistent rear brake performance on Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Caliper Set for Nissan Rogue and X-Trail
PowerStop S3436 is a rear disc brake caliper set built for Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail applications. It uses a floating caliper design with a 34.80 mm steel piston, red powder-coated cast iron housing, and a direct-fit bracket for a straightforward OE-style replacement.
PowerStop’s Rear High-Heat Red Powder Coated Brake Calipers line focuses on remanufactured performance calipers that bolt in place of the original unit and are finished for corrosion resistance. For drivers searching for a rear brake caliper for 2008-2013 Nissan Rogue or a rear caliper replacement for 2017-2019 Nissan Rogue Sport, this line combines fitment-specific engineering with a clean, visible red finish.
- Part number S3436 rear disc brake caliper set
- Fits rear brake applications on Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail
- Floating caliper design with one 34.80 mm steel piston
- Cast iron caliper body with high-temperature red powder coating
- Bracket included; caliper slides included
- Remanufactured and pressure tested for piston operation and leak prevention
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel pad abutment clips
Built for Rear Brake Service
PowerStop S3436 is remanufactured in Chicago, IL and treated with an electrostatic high-temperature red powder coat to help resist rust and corrosion. The caliper uses high-temperature EPDM rubber dust boots and premium silicone lubricant for smoother movement in demanding conditions. This rear caliper assembly is a direct replacement for the stock unit on 2005-2006 Nissan X-Trail, 2008-2013 Nissan Rogue, 2014-2015 Nissan Rogue Select, and 2017-2019 Nissan Rogue Sport, including the 2019 Rogue Sport rear application with manual parking brake notes.
Common Problems This Part Can Address
- Rear brake drag caused by worn caliper slides or piston components
- Brake fluid leaks from aging seals or bleeder hardware
- Uneven rear pad wear from a sticking floating caliper
- Corrosion on the caliper body and bracket
- Reduced rear brake response from a damaged or seized caliper assembly
Installation Notes
Verify rear fitment by year, model, and brake configuration before installation. This part includes the mounting bracket and caliper slides, but mounting hardware is not listed as included. Inspect brake pads, rotors, and brake fluid condition during service, and bleed the hydraulic system after installation. The part number S3436 should be matched to the vehicle’s rear brake setup, especially on 2019 Nissan Rogue Sport models with manual parking brake notes.
Quality Assurance
Each PowerStop caliper is 100% pressure tested to confirm piston operation and check for leaks. The remanufacturing process uses new internal components and corrosion-resistant finishing to support consistent rear brake performance on Nissan Rogue, Rogue Select, Rogue Sport, and X-Trail applications.
