PowerStop S5296 Disc Brake Caliper Set - Front
Front Red Brake Calipers for Durango and Grand Cherokee
PowerStop S5296 is a front disc brake caliper set built for performance-focused street use on select Dodge Durango and Jeep Grand Cherokee applications. These front high-heat red powder coated brake calipers bolt in place of the original units and add a clean, visible finish behind stock or custom wheels.
PowerStop remanufactures the calipers and brackets in Chicago, IL, then applies a high-temperature red powder coat to help resist rust and corrosion. Each caliper is pressure tested for piston operation and leak prevention, with new internal service components used during assembly for consistent braking performance.
Key Features
- Part number S5296 front disc brake caliper set
- Performance-grade floating caliper design
- Cast iron caliper body with phenolic pistons
- 2-piston configuration with 48.01 mm piston diameter
- Red high-temperature powder-coated finish
- Caliper slides included; mounting bracket included
- Remanufactured and pressure tested for quality verification
- Compatible with select Dodge Durango and Jeep Grand Cherokee front brake applications
Product Details
PowerStop Performance Brake Calipers are built for drivers who want direct-fit replacement calipers with a cleaner appearance and dependable pedal response. The red powder-coated finish helps protect the caliper surface from rust and corrosion while making the front brake hardware stand out behind the wheel. S5296 is a practical choice for a Jeep Grand Cherokee front brake caliper replacement or a Dodge Durango front brake caliper upgrade when the vehicle calls for the listed fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Leaking or sticking front brake calipers
- Uneven front brake pad wear
- Corrosion on original caliper housings
- Reduced piston movement from worn internal seals
- Faded or damaged caliper appearance behind the wheels
Installation Notes
Verify front brake fitment by year, make, model, and brake configuration before installation. This caliper set is listed for front applications on 2011-2017 Dodge Durango and 2012-2017 Jeep Grand Cherokee vehicles with the specified brake setup in the fitment data. Transfer or replace brake pads and related wear items as needed during service, and bleed the hydraulic system after installation.
- Fits 2011-2012 Dodge Durango, front, 330mm front disc; solid rear disc
- Fits 2013-2016 Dodge Durango, front
- Fits 2017 Dodge Durango, front, 330mm front disc; solid rear disc
- Fits 2012 Jeep Grand Cherokee, front, 330mm front disc; solid rear disc
- Fits 2014-2017 Jeep Grand Cherokee, front
Quality Assurance
PowerStop remanufactures these calipers and brackets in Chicago, IL and pressure tests each unit to confirm piston operation and check for leaks. The assembly uses new pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips, along with high-temperature EPDM dust boots and silicone lubricant for smoother operation in demanding conditions.
Original: $382.11
-65%$382.11
$133.74PowerStop S5296 Disc Brake Caliper Set - Front
Front Red Brake Calipers for Durango and Grand Cherokee
PowerStop S5296 is a front disc brake caliper set built for performance-focused street use on select Dodge Durango and Jeep Grand Cherokee applications. These front high-heat red powder coated brake calipers bolt in place of the original units and add a clean, visible finish behind stock or custom wheels.
PowerStop remanufactures the calipers and brackets in Chicago, IL, then applies a high-temperature red powder coat to help resist rust and corrosion. Each caliper is pressure tested for piston operation and leak prevention, with new internal service components used during assembly for consistent braking performance.
Key Features
- Part number S5296 front disc brake caliper set
- Performance-grade floating caliper design
- Cast iron caliper body with phenolic pistons
- 2-piston configuration with 48.01 mm piston diameter
- Red high-temperature powder-coated finish
- Caliper slides included; mounting bracket included
- Remanufactured and pressure tested for quality verification
- Compatible with select Dodge Durango and Jeep Grand Cherokee front brake applications
Product Details
PowerStop Performance Brake Calipers are built for drivers who want direct-fit replacement calipers with a cleaner appearance and dependable pedal response. The red powder-coated finish helps protect the caliper surface from rust and corrosion while making the front brake hardware stand out behind the wheel. S5296 is a practical choice for a Jeep Grand Cherokee front brake caliper replacement or a Dodge Durango front brake caliper upgrade when the vehicle calls for the listed fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Leaking or sticking front brake calipers
- Uneven front brake pad wear
- Corrosion on original caliper housings
- Reduced piston movement from worn internal seals
- Faded or damaged caliper appearance behind the wheels
Installation Notes
Verify front brake fitment by year, make, model, and brake configuration before installation. This caliper set is listed for front applications on 2011-2017 Dodge Durango and 2012-2017 Jeep Grand Cherokee vehicles with the specified brake setup in the fitment data. Transfer or replace brake pads and related wear items as needed during service, and bleed the hydraulic system after installation.
- Fits 2011-2012 Dodge Durango, front, 330mm front disc; solid rear disc
- Fits 2013-2016 Dodge Durango, front
- Fits 2017 Dodge Durango, front, 330mm front disc; solid rear disc
- Fits 2012 Jeep Grand Cherokee, front, 330mm front disc; solid rear disc
- Fits 2014-2017 Jeep Grand Cherokee, front
Quality Assurance
PowerStop remanufactures these calipers and brackets in Chicago, IL and pressure tests each unit to confirm piston operation and check for leaks. The assembly uses new pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips, along with high-temperature EPDM dust boots and silicone lubricant for smoother operation in demanding conditions.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Red Brake Calipers for Durango and Grand Cherokee
PowerStop S5296 is a front disc brake caliper set built for performance-focused street use on select Dodge Durango and Jeep Grand Cherokee applications. These front high-heat red powder coated brake calipers bolt in place of the original units and add a clean, visible finish behind stock or custom wheels.
PowerStop remanufactures the calipers and brackets in Chicago, IL, then applies a high-temperature red powder coat to help resist rust and corrosion. Each caliper is pressure tested for piston operation and leak prevention, with new internal service components used during assembly for consistent braking performance.
Key Features
- Part number S5296 front disc brake caliper set
- Performance-grade floating caliper design
- Cast iron caliper body with phenolic pistons
- 2-piston configuration with 48.01 mm piston diameter
- Red high-temperature powder-coated finish
- Caliper slides included; mounting bracket included
- Remanufactured and pressure tested for quality verification
- Compatible with select Dodge Durango and Jeep Grand Cherokee front brake applications
Product Details
PowerStop Performance Brake Calipers are built for drivers who want direct-fit replacement calipers with a cleaner appearance and dependable pedal response. The red powder-coated finish helps protect the caliper surface from rust and corrosion while making the front brake hardware stand out behind the wheel. S5296 is a practical choice for a Jeep Grand Cherokee front brake caliper replacement or a Dodge Durango front brake caliper upgrade when the vehicle calls for the listed fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Leaking or sticking front brake calipers
- Uneven front brake pad wear
- Corrosion on original caliper housings
- Reduced piston movement from worn internal seals
- Faded or damaged caliper appearance behind the wheels
Installation Notes
Verify front brake fitment by year, make, model, and brake configuration before installation. This caliper set is listed for front applications on 2011-2017 Dodge Durango and 2012-2017 Jeep Grand Cherokee vehicles with the specified brake setup in the fitment data. Transfer or replace brake pads and related wear items as needed during service, and bleed the hydraulic system after installation.
- Fits 2011-2012 Dodge Durango, front, 330mm front disc; solid rear disc
- Fits 2013-2016 Dodge Durango, front
- Fits 2017 Dodge Durango, front, 330mm front disc; solid rear disc
- Fits 2012 Jeep Grand Cherokee, front, 330mm front disc; solid rear disc
- Fits 2014-2017 Jeep Grand Cherokee, front
Quality Assurance
PowerStop remanufactures these calipers and brackets in Chicago, IL and pressure tests each unit to confirm piston operation and check for leaks. The assembly uses new pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips, along with high-temperature EPDM dust boots and silicone lubricant for smoother operation in demanding conditions.
