PowerStop S6708 Disc Brake Caliper Set - Rear
PowerStop Rear Brake Calipers for Toyota and Lexus
PowerStop S6708 rear brake calipers are built for drivers who want direct-fit replacement calipers with a performance finish. This rear high-heat red powder coated brake caliper set is made for select Toyota Corolla iM, Scion iM, Scion tC, and Lexus CT200h applications, with fitment covering 2011-2018 model years.
PowerStop remanufactures these calipers and brackets in Chicago, IL, then finishes them with a high-temperature red powder coating for corrosion resistance and easier cleaning. The result is a rear disc brake caliper set that installs in place of the original unit and adds a clean, visible red finish behind stock or custom wheels.
Key Features
- Part number S6708 rear disc brake caliper set
- Direct replacement for select rear applications
- Floating caliper design with 38.10 mm piston diameter
- Aluminum caliper casting with steel piston material
- Red high-heat powder-coated finish for corrosion resistance
- Mounting bracket included; slides included
- Pressure tested for piston operation and leak verification
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips
Product Details
PowerStop S6708 is a rear brake caliper solution for drivers servicing the braking system on a Lexus CT200h, Scion iM, Scion tC, or Toyota Corolla iM. The caliper uses a floating design and is built around a 38.10 mm piston, with aluminum casting for the housing and steel for the piston. The red powder-coated finish helps resist rust and corrosion while giving the rear brake assembly a performance appearance. If you are searching for a rear brake caliper for 2014-2017 Lexus CT200h, rear, or a rear brake caliper for 2011-2016 Scion tC, rear, S6708 matches the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Sticking or uneven rear caliper piston movement
- Brake fluid leaks from worn seals or damaged caliper components
- Corrosion on the rear caliper body or bracket
- Reduced braking consistency caused by worn slide hardware
- Visible wear on the rear brake assembly behind the wheel
Installation Notes
Compatible With rear brake applications only. Verify rotor size and vehicle fitment before installation, especially on 2011-2013 Lexus CT200h models listed with 279 mm rear brakes. Transfer or replace brake pads and inspect hoses, rotors, and hardware during service. Bleed the brake system after installation and confirm proper piston and slide operation before returning the vehicle to service.
Quality Assurance
Each PowerStop caliper is 100% pressure tested to verify piston operation and check for leaks. The caliper kit is assembled with new internal service components and premium silicone lubricant for smoother operation and durability in demanding conditions.
Original: $312.83
-65%$312.83
$109.49PowerStop S6708 Disc Brake Caliper Set - Rear
PowerStop Rear Brake Calipers for Toyota and Lexus
PowerStop S6708 rear brake calipers are built for drivers who want direct-fit replacement calipers with a performance finish. This rear high-heat red powder coated brake caliper set is made for select Toyota Corolla iM, Scion iM, Scion tC, and Lexus CT200h applications, with fitment covering 2011-2018 model years.
PowerStop remanufactures these calipers and brackets in Chicago, IL, then finishes them with a high-temperature red powder coating for corrosion resistance and easier cleaning. The result is a rear disc brake caliper set that installs in place of the original unit and adds a clean, visible red finish behind stock or custom wheels.
Key Features
- Part number S6708 rear disc brake caliper set
- Direct replacement for select rear applications
- Floating caliper design with 38.10 mm piston diameter
- Aluminum caliper casting with steel piston material
- Red high-heat powder-coated finish for corrosion resistance
- Mounting bracket included; slides included
- Pressure tested for piston operation and leak verification
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips
Product Details
PowerStop S6708 is a rear brake caliper solution for drivers servicing the braking system on a Lexus CT200h, Scion iM, Scion tC, or Toyota Corolla iM. The caliper uses a floating design and is built around a 38.10 mm piston, with aluminum casting for the housing and steel for the piston. The red powder-coated finish helps resist rust and corrosion while giving the rear brake assembly a performance appearance. If you are searching for a rear brake caliper for 2014-2017 Lexus CT200h, rear, or a rear brake caliper for 2011-2016 Scion tC, rear, S6708 matches the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Sticking or uneven rear caliper piston movement
- Brake fluid leaks from worn seals or damaged caliper components
- Corrosion on the rear caliper body or bracket
- Reduced braking consistency caused by worn slide hardware
- Visible wear on the rear brake assembly behind the wheel
Installation Notes
Compatible With rear brake applications only. Verify rotor size and vehicle fitment before installation, especially on 2011-2013 Lexus CT200h models listed with 279 mm rear brakes. Transfer or replace brake pads and inspect hoses, rotors, and hardware during service. Bleed the brake system after installation and confirm proper piston and slide operation before returning the vehicle to service.
Quality Assurance
Each PowerStop caliper is 100% pressure tested to verify piston operation and check for leaks. The caliper kit is assembled with new internal service components and premium silicone lubricant for smoother operation and durability in demanding conditions.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Rear Brake Calipers for Toyota and Lexus
PowerStop S6708 rear brake calipers are built for drivers who want direct-fit replacement calipers with a performance finish. This rear high-heat red powder coated brake caliper set is made for select Toyota Corolla iM, Scion iM, Scion tC, and Lexus CT200h applications, with fitment covering 2011-2018 model years.
PowerStop remanufactures these calipers and brackets in Chicago, IL, then finishes them with a high-temperature red powder coating for corrosion resistance and easier cleaning. The result is a rear disc brake caliper set that installs in place of the original unit and adds a clean, visible red finish behind stock or custom wheels.
Key Features
- Part number S6708 rear disc brake caliper set
- Direct replacement for select rear applications
- Floating caliper design with 38.10 mm piston diameter
- Aluminum caliper casting with steel piston material
- Red high-heat powder-coated finish for corrosion resistance
- Mounting bracket included; slides included
- Pressure tested for piston operation and leak verification
- Assembled with new pistons, seals, dust boots, bleeder screws, and stainless steel brake pad abutment clips
Product Details
PowerStop S6708 is a rear brake caliper solution for drivers servicing the braking system on a Lexus CT200h, Scion iM, Scion tC, or Toyota Corolla iM. The caliper uses a floating design and is built around a 38.10 mm piston, with aluminum casting for the housing and steel for the piston. The red powder-coated finish helps resist rust and corrosion while giving the rear brake assembly a performance appearance. If you are searching for a rear brake caliper for 2014-2017 Lexus CT200h, rear, or a rear brake caliper for 2011-2016 Scion tC, rear, S6708 matches the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Sticking or uneven rear caliper piston movement
- Brake fluid leaks from worn seals or damaged caliper components
- Corrosion on the rear caliper body or bracket
- Reduced braking consistency caused by worn slide hardware
- Visible wear on the rear brake assembly behind the wheel
Installation Notes
Compatible With rear brake applications only. Verify rotor size and vehicle fitment before installation, especially on 2011-2013 Lexus CT200h models listed with 279 mm rear brakes. Transfer or replace brake pads and inspect hoses, rotors, and hardware during service. Bleed the brake system after installation and confirm proper piston and slide operation before returning the vehicle to service.
Quality Assurance
Each PowerStop caliper is 100% pressure tested to verify piston operation and check for leaks. The caliper kit is assembled with new internal service components and premium silicone lubricant for smoother operation and durability in demanding conditions.
