PowerStop S7100 Disc Brake Caliper Set - Front
Front Brake Caliper Upgrade for Nissan and INFINITI
PowerStop S7100 is a front disc brake caliper set built for select Nissan Murano, Pathfinder, and INFINITI QX60 and JX35 applications. It replaces the original front calipers with a direct-fit, performance-focused design finished in high-heat red powder coat for a cleaner look behind stock or custom wheels.
PowerStop remanufactures the calipers and brackets in Chicago, IL, then pressure tests each unit to verify piston operation and check for leaks. The result is a front brake caliper replacement that combines OE-style fitment with corrosion resistance and a performance appearance.
Key Features
- Part number S7100 front disc brake caliper set
- Direct replacement for select front brake applications
- Floating caliper design with 2 pistons
- 44.96 mm piston diameter
- Cast iron caliper body with steel pistons
- Red high-temperature powder-coated finish
- Caliper slides included; mounting bracket included
- Remanufactured and pressure tested for leak verification
Product Details
PowerStop S7100 is part of the PowerStop Front High-Heat Red Powder Coated Brake Calipers line, created for drivers who want a direct-fit front brake caliper upgrade with durable finish and consistent operation. The calipers use new pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips during assembly. High-temperature EPDM rubber dust boots and silicone lubricant are used to support smooth movement in demanding conditions. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With front brake applications on 2023-2024 Nissan Murano, front; 2015-2022 Nissan Murano, front; 2015-2021 Nissan Murano, front; 2014-2020 INFINITI QX60, front; 2013-2020 Nissan Pathfinder, front; 2013-2020 Nissan Pathfinder, front; 2014-2019 INFINITI QX60, front; 2013 INFINITI JX35, front; and 2013 INFINITI JX35, front.
What It Helps Address
- Leaking or worn front brake calipers
- Sticky or uneven piston movement
- Corrosion on the caliper housing
- Reduced braking consistency from aging hydraulic components
- Visible brake hardware wear behind the wheel
Installation Notes
Verify vehicle fitment by year, make, model, and front position before installation. Transfer or replace brake pads and related wear items as needed during service, and bleed the brake system after caliper replacement. Confirm proper slide pin movement and piston retraction before returning the vehicle to service.
Quality Assurance
PowerStop remanufactures these calipers and brackets in its Chicago, IL facility and pressure tests each unit for piston function and leak prevention. The red powder-coated finish is engineered to resist rust and corrosion, helping maintain appearance and service life in harsh brake environments.
Original: $414.45
-65%$414.45
$145.06PowerStop S7100 Disc Brake Caliper Set - Front
Front Brake Caliper Upgrade for Nissan and INFINITI
PowerStop S7100 is a front disc brake caliper set built for select Nissan Murano, Pathfinder, and INFINITI QX60 and JX35 applications. It replaces the original front calipers with a direct-fit, performance-focused design finished in high-heat red powder coat for a cleaner look behind stock or custom wheels.
PowerStop remanufactures the calipers and brackets in Chicago, IL, then pressure tests each unit to verify piston operation and check for leaks. The result is a front brake caliper replacement that combines OE-style fitment with corrosion resistance and a performance appearance.
Key Features
- Part number S7100 front disc brake caliper set
- Direct replacement for select front brake applications
- Floating caliper design with 2 pistons
- 44.96 mm piston diameter
- Cast iron caliper body with steel pistons
- Red high-temperature powder-coated finish
- Caliper slides included; mounting bracket included
- Remanufactured and pressure tested for leak verification
Product Details
PowerStop S7100 is part of the PowerStop Front High-Heat Red Powder Coated Brake Calipers line, created for drivers who want a direct-fit front brake caliper upgrade with durable finish and consistent operation. The calipers use new pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips during assembly. High-temperature EPDM rubber dust boots and silicone lubricant are used to support smooth movement in demanding conditions. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With front brake applications on 2023-2024 Nissan Murano, front; 2015-2022 Nissan Murano, front; 2015-2021 Nissan Murano, front; 2014-2020 INFINITI QX60, front; 2013-2020 Nissan Pathfinder, front; 2013-2020 Nissan Pathfinder, front; 2014-2019 INFINITI QX60, front; 2013 INFINITI JX35, front; and 2013 INFINITI JX35, front.
What It Helps Address
- Leaking or worn front brake calipers
- Sticky or uneven piston movement
- Corrosion on the caliper housing
- Reduced braking consistency from aging hydraulic components
- Visible brake hardware wear behind the wheel
Installation Notes
Verify vehicle fitment by year, make, model, and front position before installation. Transfer or replace brake pads and related wear items as needed during service, and bleed the brake system after caliper replacement. Confirm proper slide pin movement and piston retraction before returning the vehicle to service.
Quality Assurance
PowerStop remanufactures these calipers and brackets in its Chicago, IL facility and pressure tests each unit for piston function and leak prevention. The red powder-coated finish is engineered to resist rust and corrosion, helping maintain appearance and service life in harsh brake environments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Caliper Upgrade for Nissan and INFINITI
PowerStop S7100 is a front disc brake caliper set built for select Nissan Murano, Pathfinder, and INFINITI QX60 and JX35 applications. It replaces the original front calipers with a direct-fit, performance-focused design finished in high-heat red powder coat for a cleaner look behind stock or custom wheels.
PowerStop remanufactures the calipers and brackets in Chicago, IL, then pressure tests each unit to verify piston operation and check for leaks. The result is a front brake caliper replacement that combines OE-style fitment with corrosion resistance and a performance appearance.
Key Features
- Part number S7100 front disc brake caliper set
- Direct replacement for select front brake applications
- Floating caliper design with 2 pistons
- 44.96 mm piston diameter
- Cast iron caliper body with steel pistons
- Red high-temperature powder-coated finish
- Caliper slides included; mounting bracket included
- Remanufactured and pressure tested for leak verification
Product Details
PowerStop S7100 is part of the PowerStop Front High-Heat Red Powder Coated Brake Calipers line, created for drivers who want a direct-fit front brake caliper upgrade with durable finish and consistent operation. The calipers use new pistons, seals, slide pins where applicable, dust boots, bleeder screws, and stainless steel brake pad abutment clips during assembly. High-temperature EPDM rubber dust boots and silicone lubricant are used to support smooth movement in demanding conditions. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With front brake applications on 2023-2024 Nissan Murano, front; 2015-2022 Nissan Murano, front; 2015-2021 Nissan Murano, front; 2014-2020 INFINITI QX60, front; 2013-2020 Nissan Pathfinder, front; 2013-2020 Nissan Pathfinder, front; 2014-2019 INFINITI QX60, front; 2013 INFINITI JX35, front; and 2013 INFINITI JX35, front.
What It Helps Address
- Leaking or worn front brake calipers
- Sticky or uneven piston movement
- Corrosion on the caliper housing
- Reduced braking consistency from aging hydraulic components
- Visible brake hardware wear behind the wheel
Installation Notes
Verify vehicle fitment by year, make, model, and front position before installation. Transfer or replace brake pads and related wear items as needed during service, and bleed the brake system after caliper replacement. Confirm proper slide pin movement and piston retraction before returning the vehicle to service.
Quality Assurance
PowerStop remanufactures these calipers and brackets in its Chicago, IL facility and pressure tests each unit for piston function and leak prevention. The red powder-coated finish is engineered to resist rust and corrosion, helping maintain appearance and service life in harsh brake environments.
