PowerStop SW-0465 Disc Brake Pad Wear Sensor - Front
Front Euro-Stop Brake Wear Sensor
PowerStop SW-0465 is a front disc brake pad wear sensor built for Euro-Stop brake applications that use electronic pad wear monitoring. It is designed to match OEM form, fit, and function, with temperature-resistant construction for stable electrode conductivity over long service life.
For BMW 328i, 335i, 335is, 335d, and 335i xDrive front brake service, this sensor helps restore proper wear-indicator operation after pad replacement. The PowerStop SW-0465 is a direct replacement choice for drivers maintaining factory-style brake warning performance.
Key Features
- Front electronic disc brake pad wear sensor
- OE-style form, fit, and function
- Built for Euro-Stop brake systems
- Temperature-resistant construction for consistent conductivity
- White connector with round connector shape
- Female connector, male terminals, 2-wire design
- Includes grommets for routing and retention
- Wiring harness length: 28.46 in. / 723 mm
Product Details
PowerStop’s Euro-Stop sensor line is focused on replacing worn brake wear sensors with a direct-fit electronic solution that matches the original sensor layout. Part number SW-0465 is engineered for front axle applications and uses a 2-wire, 1-connector configuration with a round female connector and male terminals. The sensor is built to maintain conductivity under high-temperature brake conditions, helping preserve accurate pad wear monitoring in vehicles equipped with electronic brake warning systems.
This part cross-references Beck/Arnley 084-1846 and Centric Parts 116.34065 for the same application.
What It Helps Address
- Brake wear warning light remaining on after pad service
- Damaged or worn electronic pad wear sensor
- Loss of brake pad wear monitoring at the front axle
- Faulty sensor connector or harness routing issues
- Need for OE-style replacement during brake maintenance
Installation Notes
Replace the front wear sensor during brake pad service whenever the original sensor is worn, damaged, or triggered. Confirm connector style, harness routing, and front-position application before installation. This sensor is listed for 2011-2013 BMW 328i front, 2011-2013 BMW 335i front, 2013 BMW 335i xDrive front, 2011-2013 BMW 335is front, and 2011 BMW 335d front.
- Fits 2011-2013 BMW 328i, front
- Fits 2011-2013 BMW 335i, front
- Fits 2013 BMW 335i xDrive, front
- Fits 2011-2013 BMW 335is, front
- Fits 2011 BMW 335d, front
Quality Assurance
PowerStop designs its brake wear sensors to meet or exceed OEM requirements and to withstand extreme brake-system temperatures. SW-0465 is intended to deliver the same basic function as the original sensor while supporting reliable brake wear monitoring over extended mileage.
PowerStop SW-0465 Disc Brake Pad Wear Sensor - Front
Front Euro-Stop Brake Wear Sensor
PowerStop SW-0465 is a front disc brake pad wear sensor built for Euro-Stop brake applications that use electronic pad wear monitoring. It is designed to match OEM form, fit, and function, with temperature-resistant construction for stable electrode conductivity over long service life.
For BMW 328i, 335i, 335is, 335d, and 335i xDrive front brake service, this sensor helps restore proper wear-indicator operation after pad replacement. The PowerStop SW-0465 is a direct replacement choice for drivers maintaining factory-style brake warning performance.
Key Features
- Front electronic disc brake pad wear sensor
- OE-style form, fit, and function
- Built for Euro-Stop brake systems
- Temperature-resistant construction for consistent conductivity
- White connector with round connector shape
- Female connector, male terminals, 2-wire design
- Includes grommets for routing and retention
- Wiring harness length: 28.46 in. / 723 mm
Product Details
PowerStop’s Euro-Stop sensor line is focused on replacing worn brake wear sensors with a direct-fit electronic solution that matches the original sensor layout. Part number SW-0465 is engineered for front axle applications and uses a 2-wire, 1-connector configuration with a round female connector and male terminals. The sensor is built to maintain conductivity under high-temperature brake conditions, helping preserve accurate pad wear monitoring in vehicles equipped with electronic brake warning systems.
This part cross-references Beck/Arnley 084-1846 and Centric Parts 116.34065 for the same application.
What It Helps Address
- Brake wear warning light remaining on after pad service
- Damaged or worn electronic pad wear sensor
- Loss of brake pad wear monitoring at the front axle
- Faulty sensor connector or harness routing issues
- Need for OE-style replacement during brake maintenance
Installation Notes
Replace the front wear sensor during brake pad service whenever the original sensor is worn, damaged, or triggered. Confirm connector style, harness routing, and front-position application before installation. This sensor is listed for 2011-2013 BMW 328i front, 2011-2013 BMW 335i front, 2013 BMW 335i xDrive front, 2011-2013 BMW 335is front, and 2011 BMW 335d front.
- Fits 2011-2013 BMW 328i, front
- Fits 2011-2013 BMW 335i, front
- Fits 2013 BMW 335i xDrive, front
- Fits 2011-2013 BMW 335is, front
- Fits 2011 BMW 335d, front
Quality Assurance
PowerStop designs its brake wear sensors to meet or exceed OEM requirements and to withstand extreme brake-system temperatures. SW-0465 is intended to deliver the same basic function as the original sensor while supporting reliable brake wear monitoring over extended mileage.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Euro-Stop Brake Wear Sensor
PowerStop SW-0465 is a front disc brake pad wear sensor built for Euro-Stop brake applications that use electronic pad wear monitoring. It is designed to match OEM form, fit, and function, with temperature-resistant construction for stable electrode conductivity over long service life.
For BMW 328i, 335i, 335is, 335d, and 335i xDrive front brake service, this sensor helps restore proper wear-indicator operation after pad replacement. The PowerStop SW-0465 is a direct replacement choice for drivers maintaining factory-style brake warning performance.
Key Features
- Front electronic disc brake pad wear sensor
- OE-style form, fit, and function
- Built for Euro-Stop brake systems
- Temperature-resistant construction for consistent conductivity
- White connector with round connector shape
- Female connector, male terminals, 2-wire design
- Includes grommets for routing and retention
- Wiring harness length: 28.46 in. / 723 mm
Product Details
PowerStop’s Euro-Stop sensor line is focused on replacing worn brake wear sensors with a direct-fit electronic solution that matches the original sensor layout. Part number SW-0465 is engineered for front axle applications and uses a 2-wire, 1-connector configuration with a round female connector and male terminals. The sensor is built to maintain conductivity under high-temperature brake conditions, helping preserve accurate pad wear monitoring in vehicles equipped with electronic brake warning systems.
This part cross-references Beck/Arnley 084-1846 and Centric Parts 116.34065 for the same application.
What It Helps Address
- Brake wear warning light remaining on after pad service
- Damaged or worn electronic pad wear sensor
- Loss of brake pad wear monitoring at the front axle
- Faulty sensor connector or harness routing issues
- Need for OE-style replacement during brake maintenance
Installation Notes
Replace the front wear sensor during brake pad service whenever the original sensor is worn, damaged, or triggered. Confirm connector style, harness routing, and front-position application before installation. This sensor is listed for 2011-2013 BMW 328i front, 2011-2013 BMW 335i front, 2013 BMW 335i xDrive front, 2011-2013 BMW 335is front, and 2011 BMW 335d front.
- Fits 2011-2013 BMW 328i, front
- Fits 2011-2013 BMW 335i, front
- Fits 2013 BMW 335i xDrive, front
- Fits 2011-2013 BMW 335is, front
- Fits 2011 BMW 335d, front
Quality Assurance
PowerStop designs its brake wear sensors to meet or exceed OEM requirements and to withstand extreme brake-system temperatures. SW-0465 is intended to deliver the same basic function as the original sensor while supporting reliable brake wear monitoring over extended mileage.
