PowerStop SW-0913 Disc Brake Pad Wear Sensor - Rear or Rear Right
Rear Brake Wear Sensor for Lexus LS
PowerStop SW-0913 is a rear electronic brake pad wear sensor for select Lexus LS applications. It is built to match the original sensor’s form, fit, and function, helping maintain accurate brake wear monitoring on the rear right or rear position where equipped.
For Lexus LS460 and LS600h brake service, replacing a worn sensor during pad work helps restore proper wear indication and keeps the brake warning system operating as intended.
Key Features
- Rear Euro-Stop electronic brake wear sensor
- Designed for rear right and rear positions on listed Lexus LS applications
- Gray connector with female connector and female blade terminals
- 2-wire design with 1 connector and 2 terminals
- Includes grommets and uses a square connector shape
- Built to withstand high temperatures for stable electrode conductivity
- Engineered to meet or exceed OEM form, fit, and function requirements
Product Details
PowerStop’s Euro-Stop sensor line focuses on direct-fit brake wear monitoring components for European-style electronic brake systems. SW-0913 follows the same OE-style layout expected on the rear brake circuit, making it a practical replacement when servicing brake pads and rotors on Lexus LS460 and Lexus LS600h models. This part number, SW-0913, is intended to restore the warning function that alerts the driver when pad wear reaches the sensor threshold.
This part cross-references Beck/Arnley 084-1616 and HOLSTEIN 2BWS0048 for the same application.
What It Helps Address
- Brake wear warning light staying on after pad service
- Damaged or brittle rear brake wear sensor wiring
- Inaccurate pad wear indication on Lexus LS rear brakes
- Sensor failure caused by heat and brake system exposure
- Loss of proper electronic wear monitoring during routine brake maintenance
Installation Notes
Install SW-0913 on the rear right or rear position only where listed in the fitment data. Verify connector shape, terminal style, and harness routing before installation. Replace the sensor when servicing worn pads so the brake wear monitoring system can reset correctly and continue to report pad condition accurately. Confirm vehicle-specific fitment for Lexus LS460 and Lexus LS600h by year, package, and rotor configuration before ordering.
Quality Assurance
PowerStop designs this sensor to meet or exceed OEM requirements for form, fit, and function. The sensor is built for durability in high-temperature brake environments and is intended to provide consistent conductivity over extended service life.
- Fits 2010-2017 Lexus LS460, rear right
- Fits 2015-2016 Lexus LS600h, rear right
- Fits 2011-2012 Lexus LS600h, rear right
- Fits 2014 Lexus LS600h, rear right, with Sport Package
- Fits 2013 Lexus LS460, rear right, with Sport Package
- Fits 2010-2011 Lexus LS460, rear right, with Sport Package
- Fits 2013 Lexus LS600h, rear right, Exc. F Sport Package
- Fits 2012 Lexus LS460, rear right, with Sport Package; with 335mm Rotors
- Fits 2010 Lexus LS600h, rear right, From 11/2009
- Fits 2010 Lexus LS600h, rear, To 11/2009
- Fits 2007-2009 Lexus LS460, rear, with Sport Package
- Fits 2009 Lexus LS460, rear
- Fits 2008-2009 Lexus LS600h, rear
Original: $76.28
-65%$76.28
$26.70PowerStop SW-0913 Disc Brake Pad Wear Sensor - Rear or Rear Right
Rear Brake Wear Sensor for Lexus LS
PowerStop SW-0913 is a rear electronic brake pad wear sensor for select Lexus LS applications. It is built to match the original sensor’s form, fit, and function, helping maintain accurate brake wear monitoring on the rear right or rear position where equipped.
For Lexus LS460 and LS600h brake service, replacing a worn sensor during pad work helps restore proper wear indication and keeps the brake warning system operating as intended.
Key Features
- Rear Euro-Stop electronic brake wear sensor
- Designed for rear right and rear positions on listed Lexus LS applications
- Gray connector with female connector and female blade terminals
- 2-wire design with 1 connector and 2 terminals
- Includes grommets and uses a square connector shape
- Built to withstand high temperatures for stable electrode conductivity
- Engineered to meet or exceed OEM form, fit, and function requirements
Product Details
PowerStop’s Euro-Stop sensor line focuses on direct-fit brake wear monitoring components for European-style electronic brake systems. SW-0913 follows the same OE-style layout expected on the rear brake circuit, making it a practical replacement when servicing brake pads and rotors on Lexus LS460 and Lexus LS600h models. This part number, SW-0913, is intended to restore the warning function that alerts the driver when pad wear reaches the sensor threshold.
This part cross-references Beck/Arnley 084-1616 and HOLSTEIN 2BWS0048 for the same application.
What It Helps Address
- Brake wear warning light staying on after pad service
- Damaged or brittle rear brake wear sensor wiring
- Inaccurate pad wear indication on Lexus LS rear brakes
- Sensor failure caused by heat and brake system exposure
- Loss of proper electronic wear monitoring during routine brake maintenance
Installation Notes
Install SW-0913 on the rear right or rear position only where listed in the fitment data. Verify connector shape, terminal style, and harness routing before installation. Replace the sensor when servicing worn pads so the brake wear monitoring system can reset correctly and continue to report pad condition accurately. Confirm vehicle-specific fitment for Lexus LS460 and Lexus LS600h by year, package, and rotor configuration before ordering.
Quality Assurance
PowerStop designs this sensor to meet or exceed OEM requirements for form, fit, and function. The sensor is built for durability in high-temperature brake environments and is intended to provide consistent conductivity over extended service life.
- Fits 2010-2017 Lexus LS460, rear right
- Fits 2015-2016 Lexus LS600h, rear right
- Fits 2011-2012 Lexus LS600h, rear right
- Fits 2014 Lexus LS600h, rear right, with Sport Package
- Fits 2013 Lexus LS460, rear right, with Sport Package
- Fits 2010-2011 Lexus LS460, rear right, with Sport Package
- Fits 2013 Lexus LS600h, rear right, Exc. F Sport Package
- Fits 2012 Lexus LS460, rear right, with Sport Package; with 335mm Rotors
- Fits 2010 Lexus LS600h, rear right, From 11/2009
- Fits 2010 Lexus LS600h, rear, To 11/2009
- Fits 2007-2009 Lexus LS460, rear, with Sport Package
- Fits 2009 Lexus LS460, rear
- Fits 2008-2009 Lexus LS600h, rear
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Wear Sensor for Lexus LS
PowerStop SW-0913 is a rear electronic brake pad wear sensor for select Lexus LS applications. It is built to match the original sensor’s form, fit, and function, helping maintain accurate brake wear monitoring on the rear right or rear position where equipped.
For Lexus LS460 and LS600h brake service, replacing a worn sensor during pad work helps restore proper wear indication and keeps the brake warning system operating as intended.
Key Features
- Rear Euro-Stop electronic brake wear sensor
- Designed for rear right and rear positions on listed Lexus LS applications
- Gray connector with female connector and female blade terminals
- 2-wire design with 1 connector and 2 terminals
- Includes grommets and uses a square connector shape
- Built to withstand high temperatures for stable electrode conductivity
- Engineered to meet or exceed OEM form, fit, and function requirements
Product Details
PowerStop’s Euro-Stop sensor line focuses on direct-fit brake wear monitoring components for European-style electronic brake systems. SW-0913 follows the same OE-style layout expected on the rear brake circuit, making it a practical replacement when servicing brake pads and rotors on Lexus LS460 and Lexus LS600h models. This part number, SW-0913, is intended to restore the warning function that alerts the driver when pad wear reaches the sensor threshold.
This part cross-references Beck/Arnley 084-1616 and HOLSTEIN 2BWS0048 for the same application.
What It Helps Address
- Brake wear warning light staying on after pad service
- Damaged or brittle rear brake wear sensor wiring
- Inaccurate pad wear indication on Lexus LS rear brakes
- Sensor failure caused by heat and brake system exposure
- Loss of proper electronic wear monitoring during routine brake maintenance
Installation Notes
Install SW-0913 on the rear right or rear position only where listed in the fitment data. Verify connector shape, terminal style, and harness routing before installation. Replace the sensor when servicing worn pads so the brake wear monitoring system can reset correctly and continue to report pad condition accurately. Confirm vehicle-specific fitment for Lexus LS460 and Lexus LS600h by year, package, and rotor configuration before ordering.
Quality Assurance
PowerStop designs this sensor to meet or exceed OEM requirements for form, fit, and function. The sensor is built for durability in high-temperature brake environments and is intended to provide consistent conductivity over extended service life.
- Fits 2010-2017 Lexus LS460, rear right
- Fits 2015-2016 Lexus LS600h, rear right
- Fits 2011-2012 Lexus LS600h, rear right
- Fits 2014 Lexus LS600h, rear right, with Sport Package
- Fits 2013 Lexus LS460, rear right, with Sport Package
- Fits 2010-2011 Lexus LS460, rear right, with Sport Package
- Fits 2013 Lexus LS600h, rear right, Exc. F Sport Package
- Fits 2012 Lexus LS460, rear right, with Sport Package; with 335mm Rotors
- Fits 2010 Lexus LS600h, rear right, From 11/2009
- Fits 2010 Lexus LS600h, rear, To 11/2009
- Fits 2007-2009 Lexus LS460, rear, with Sport Package
- Fits 2009 Lexus LS460, rear
- Fits 2008-2009 Lexus LS600h, rear
