PowerStop SW-0914 Disc Brake Pad Wear Sensor - Rear Left
Rear Brake Wear Sensor for Lexus LS460 and LS600h
PowerStop SW-0914 is a rear left electronic brake pad wear sensor for select Lexus LS460 and LS600h applications. It is built to match original equipment form, fit, and function, making it a direct replacement for worn or damaged rear brake wear sensors.
For drivers servicing the rear brakes on a Lexus LS460 or Lexus LS600h, this Euro-Stop sensor helps restore proper brake wear monitoring after pad and rotor replacement. The SW-0914 is engineered for dependable conductivity and consistent operation under high-temperature brake conditions.
PowerStop Euro-Stop Sensor Line
PowerStop’s Euro-Stop brake wear sensor line focuses on OE-style replacement parts for vehicles that use electronic pad wear monitoring. These sensors are designed for straightforward installation and accurate signal performance, helping maintain the factory brake warning system on supported applications.
Key Features
- Rear left disc brake pad wear sensor
- OE-style form, fit, and function
- Built to meet or exceed OEM requirements
- High-temperature construction for stable electrode conductivity
- Gray connector with square connector shape
- Female connector and female blade terminals
- Two-wire design with integrated grommets
- PowerStop SW-0914 replacement sensor
Detailed Description
PowerStop SW-0914 is a disc brake pad wear sensor designed for rear left placement on select Lexus LS460 and Lexus LS600h models. It is intended for vehicles that use an electronic brake wear monitoring system and is built to restore the factory-style warning function after brake service. The sensor uses a square, gray female connector with two female blade terminals, along with a two-wire harness and grommets for routing and retention.
This part cross-references Beck/Arnley 084-1959 and Centric Parts 116.44014 for the same application. It also cross-references Raybestos Brakes EWS214 and WK1553 for the same application.
What It Helps Address
- Brake wear warning light staying on after pad replacement
- Damaged or worn rear brake sensor wiring
- Incorrect brake wear signal from an aging sensor
- Loss of electronic pad wear monitoring on the rear left brake
- Need for an OE-style replacement during brake service
Installation Notes and Tips
Replace the sensor when servicing brake pads or rotors if the original sensor is worn, damaged, or triggered. Confirm rear left placement before installation, and route the harness to avoid contact with moving suspension or hot brake components. Verify connector style and fitment against the vehicle’s existing brake wear sensor before final assembly.
Compatible With 2010-2017 Lexus LS460, rear left; 2010-2013 Lexus LS600h, rear left. Additional fitment notes include 2011-2012 Lexus LS460 rear left with Sport Package, and 2011-2012 Lexus LS600h rear left with production-date-specific applications.
Quality Assurance
PowerStop designs its Euro-Stop brake wear sensors to meet OE-style requirements for form, fit, and function. The SW-0914 is built to withstand extreme temperatures and maintain conductivity over extended service life, supporting reliable brake wear monitoring on the specified Lexus applications.
Original: $49.45
-65%$49.45
$17.31PowerStop SW-0914 Disc Brake Pad Wear Sensor - Rear Left
Rear Brake Wear Sensor for Lexus LS460 and LS600h
PowerStop SW-0914 is a rear left electronic brake pad wear sensor for select Lexus LS460 and LS600h applications. It is built to match original equipment form, fit, and function, making it a direct replacement for worn or damaged rear brake wear sensors.
For drivers servicing the rear brakes on a Lexus LS460 or Lexus LS600h, this Euro-Stop sensor helps restore proper brake wear monitoring after pad and rotor replacement. The SW-0914 is engineered for dependable conductivity and consistent operation under high-temperature brake conditions.
PowerStop Euro-Stop Sensor Line
PowerStop’s Euro-Stop brake wear sensor line focuses on OE-style replacement parts for vehicles that use electronic pad wear monitoring. These sensors are designed for straightforward installation and accurate signal performance, helping maintain the factory brake warning system on supported applications.
Key Features
- Rear left disc brake pad wear sensor
- OE-style form, fit, and function
- Built to meet or exceed OEM requirements
- High-temperature construction for stable electrode conductivity
- Gray connector with square connector shape
- Female connector and female blade terminals
- Two-wire design with integrated grommets
- PowerStop SW-0914 replacement sensor
Detailed Description
PowerStop SW-0914 is a disc brake pad wear sensor designed for rear left placement on select Lexus LS460 and Lexus LS600h models. It is intended for vehicles that use an electronic brake wear monitoring system and is built to restore the factory-style warning function after brake service. The sensor uses a square, gray female connector with two female blade terminals, along with a two-wire harness and grommets for routing and retention.
This part cross-references Beck/Arnley 084-1959 and Centric Parts 116.44014 for the same application. It also cross-references Raybestos Brakes EWS214 and WK1553 for the same application.
What It Helps Address
- Brake wear warning light staying on after pad replacement
- Damaged or worn rear brake sensor wiring
- Incorrect brake wear signal from an aging sensor
- Loss of electronic pad wear monitoring on the rear left brake
- Need for an OE-style replacement during brake service
Installation Notes and Tips
Replace the sensor when servicing brake pads or rotors if the original sensor is worn, damaged, or triggered. Confirm rear left placement before installation, and route the harness to avoid contact with moving suspension or hot brake components. Verify connector style and fitment against the vehicle’s existing brake wear sensor before final assembly.
Compatible With 2010-2017 Lexus LS460, rear left; 2010-2013 Lexus LS600h, rear left. Additional fitment notes include 2011-2012 Lexus LS460 rear left with Sport Package, and 2011-2012 Lexus LS600h rear left with production-date-specific applications.
Quality Assurance
PowerStop designs its Euro-Stop brake wear sensors to meet OE-style requirements for form, fit, and function. The SW-0914 is built to withstand extreme temperatures and maintain conductivity over extended service life, supporting reliable brake wear monitoring on the specified Lexus applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Wear Sensor for Lexus LS460 and LS600h
PowerStop SW-0914 is a rear left electronic brake pad wear sensor for select Lexus LS460 and LS600h applications. It is built to match original equipment form, fit, and function, making it a direct replacement for worn or damaged rear brake wear sensors.
For drivers servicing the rear brakes on a Lexus LS460 or Lexus LS600h, this Euro-Stop sensor helps restore proper brake wear monitoring after pad and rotor replacement. The SW-0914 is engineered for dependable conductivity and consistent operation under high-temperature brake conditions.
PowerStop Euro-Stop Sensor Line
PowerStop’s Euro-Stop brake wear sensor line focuses on OE-style replacement parts for vehicles that use electronic pad wear monitoring. These sensors are designed for straightforward installation and accurate signal performance, helping maintain the factory brake warning system on supported applications.
Key Features
- Rear left disc brake pad wear sensor
- OE-style form, fit, and function
- Built to meet or exceed OEM requirements
- High-temperature construction for stable electrode conductivity
- Gray connector with square connector shape
- Female connector and female blade terminals
- Two-wire design with integrated grommets
- PowerStop SW-0914 replacement sensor
Detailed Description
PowerStop SW-0914 is a disc brake pad wear sensor designed for rear left placement on select Lexus LS460 and Lexus LS600h models. It is intended for vehicles that use an electronic brake wear monitoring system and is built to restore the factory-style warning function after brake service. The sensor uses a square, gray female connector with two female blade terminals, along with a two-wire harness and grommets for routing and retention.
This part cross-references Beck/Arnley 084-1959 and Centric Parts 116.44014 for the same application. It also cross-references Raybestos Brakes EWS214 and WK1553 for the same application.
What It Helps Address
- Brake wear warning light staying on after pad replacement
- Damaged or worn rear brake sensor wiring
- Incorrect brake wear signal from an aging sensor
- Loss of electronic pad wear monitoring on the rear left brake
- Need for an OE-style replacement during brake service
Installation Notes and Tips
Replace the sensor when servicing brake pads or rotors if the original sensor is worn, damaged, or triggered. Confirm rear left placement before installation, and route the harness to avoid contact with moving suspension or hot brake components. Verify connector style and fitment against the vehicle’s existing brake wear sensor before final assembly.
Compatible With 2010-2017 Lexus LS460, rear left; 2010-2013 Lexus LS600h, rear left. Additional fitment notes include 2011-2012 Lexus LS460 rear left with Sport Package, and 2011-2012 Lexus LS600h rear left with production-date-specific applications.
Quality Assurance
PowerStop designs its Euro-Stop brake wear sensors to meet OE-style requirements for form, fit, and function. The SW-0914 is built to withstand extreme temperatures and maintain conductivity over extended service life, supporting reliable brake wear monitoring on the specified Lexus applications.
