PowerStop SW-1688 Disc Brake Pad Wear Sensor - Rear
Rear Brake Wear Sensor for Land Rover
PowerStop SW-1688 is a rear electronic brake pad wear sensor for select Land Rover applications. It is built to match OEM form, fit, and function, with temperature-resistant construction for consistent conductivity over long service life.
Compatible with rear brake wear sensor applications on Land Rover Defender 90, Defender 110, Defender 130, Discovery, Range Rover, and Range Rover Sport models listed below.
Key Features
- Rear disc brake pad wear sensor for electronic brake monitoring systems
- OEM-style fitment and connector layout for direct replacement use
- Built to withstand extreme temperatures for stable electrode conductivity
- White female connector with oval shape and pin terminals
- Two-wire design with grommets included and multiple grommet points
- Wiring harness length: 37.00 / 940.00
- Part number SW-1688 for easy identification and ordering
Product Details
PowerStop’s Euro-Stop electronic brake wear sensor line focuses on replacing worn brake pad sensors at the same time as brake service. SW-1688 is engineered for rear axle applications and follows the original sensor layout used on the vehicle, helping maintain proper brake wear warning function after pad and rotor replacement. This part number, SW-1688, is listed for Land Rover rear applications where the factory sensor is required.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake wear warning light remaining on after pad service
- Damaged or worn rear brake pad sensor wiring
- Faulty sensor signal from heat-affected or broken wear indicators
- Loss of brake pad wear monitoring on rear brake systems
- Need for an OEM-style replacement during brake maintenance
Installation Notes
Replace the rear wear sensor during brake pad service whenever the original sensor is worn, damaged, or triggered. Confirm connector shape, terminal style, and harness routing against the original part before installation. Verify the rear position and vehicle application listed below before ordering.
- Fits 2023-2025 Land Rover Defender 110, Rear
- Fits 2023-2025 Land Rover Defender 130, Rear
- Fits 2023-2025 Land Rover Defender 90, Rear
- Fits 2023-2025 Land Rover Discovery, Rear
- Fits 2020-2022 Land Rover Defender 110, Rear
- Fits 2021-2022 Land Rover Defender 90, Rear
- Fits 2018-2022 Land Rover Discovery, Rear
- Fits 2022 Land Rover Range Rover, Rear
- Fits 2018-2021 Land Rover Range Rover, Rear
- Fits 2018-2022 Land Rover Range Rover Sport, Rear
Quality Assurance
PowerStop builds Euro-Stop brake wear sensors to meet or exceed OEM requirements for form, fit, and function. SW-1688 is designed for dependable rear brake wear monitoring in the listed Land Rover applications.
Original: $37.91
-65%$37.91
$13.27PowerStop SW-1688 Disc Brake Pad Wear Sensor - Rear
Rear Brake Wear Sensor for Land Rover
PowerStop SW-1688 is a rear electronic brake pad wear sensor for select Land Rover applications. It is built to match OEM form, fit, and function, with temperature-resistant construction for consistent conductivity over long service life.
Compatible with rear brake wear sensor applications on Land Rover Defender 90, Defender 110, Defender 130, Discovery, Range Rover, and Range Rover Sport models listed below.
Key Features
- Rear disc brake pad wear sensor for electronic brake monitoring systems
- OEM-style fitment and connector layout for direct replacement use
- Built to withstand extreme temperatures for stable electrode conductivity
- White female connector with oval shape and pin terminals
- Two-wire design with grommets included and multiple grommet points
- Wiring harness length: 37.00 / 940.00
- Part number SW-1688 for easy identification and ordering
Product Details
PowerStop’s Euro-Stop electronic brake wear sensor line focuses on replacing worn brake pad sensors at the same time as brake service. SW-1688 is engineered for rear axle applications and follows the original sensor layout used on the vehicle, helping maintain proper brake wear warning function after pad and rotor replacement. This part number, SW-1688, is listed for Land Rover rear applications where the factory sensor is required.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake wear warning light remaining on after pad service
- Damaged or worn rear brake pad sensor wiring
- Faulty sensor signal from heat-affected or broken wear indicators
- Loss of brake pad wear monitoring on rear brake systems
- Need for an OEM-style replacement during brake maintenance
Installation Notes
Replace the rear wear sensor during brake pad service whenever the original sensor is worn, damaged, or triggered. Confirm connector shape, terminal style, and harness routing against the original part before installation. Verify the rear position and vehicle application listed below before ordering.
- Fits 2023-2025 Land Rover Defender 110, Rear
- Fits 2023-2025 Land Rover Defender 130, Rear
- Fits 2023-2025 Land Rover Defender 90, Rear
- Fits 2023-2025 Land Rover Discovery, Rear
- Fits 2020-2022 Land Rover Defender 110, Rear
- Fits 2021-2022 Land Rover Defender 90, Rear
- Fits 2018-2022 Land Rover Discovery, Rear
- Fits 2022 Land Rover Range Rover, Rear
- Fits 2018-2021 Land Rover Range Rover, Rear
- Fits 2018-2022 Land Rover Range Rover Sport, Rear
Quality Assurance
PowerStop builds Euro-Stop brake wear sensors to meet or exceed OEM requirements for form, fit, and function. SW-1688 is designed for dependable rear brake wear monitoring in the listed Land Rover applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Wear Sensor for Land Rover
PowerStop SW-1688 is a rear electronic brake pad wear sensor for select Land Rover applications. It is built to match OEM form, fit, and function, with temperature-resistant construction for consistent conductivity over long service life.
Compatible with rear brake wear sensor applications on Land Rover Defender 90, Defender 110, Defender 130, Discovery, Range Rover, and Range Rover Sport models listed below.
Key Features
- Rear disc brake pad wear sensor for electronic brake monitoring systems
- OEM-style fitment and connector layout for direct replacement use
- Built to withstand extreme temperatures for stable electrode conductivity
- White female connector with oval shape and pin terminals
- Two-wire design with grommets included and multiple grommet points
- Wiring harness length: 37.00 / 940.00
- Part number SW-1688 for easy identification and ordering
Product Details
PowerStop’s Euro-Stop electronic brake wear sensor line focuses on replacing worn brake pad sensors at the same time as brake service. SW-1688 is engineered for rear axle applications and follows the original sensor layout used on the vehicle, helping maintain proper brake wear warning function after pad and rotor replacement. This part number, SW-1688, is listed for Land Rover rear applications where the factory sensor is required.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake wear warning light remaining on after pad service
- Damaged or worn rear brake pad sensor wiring
- Faulty sensor signal from heat-affected or broken wear indicators
- Loss of brake pad wear monitoring on rear brake systems
- Need for an OEM-style replacement during brake maintenance
Installation Notes
Replace the rear wear sensor during brake pad service whenever the original sensor is worn, damaged, or triggered. Confirm connector shape, terminal style, and harness routing against the original part before installation. Verify the rear position and vehicle application listed below before ordering.
- Fits 2023-2025 Land Rover Defender 110, Rear
- Fits 2023-2025 Land Rover Defender 130, Rear
- Fits 2023-2025 Land Rover Defender 90, Rear
- Fits 2023-2025 Land Rover Discovery, Rear
- Fits 2020-2022 Land Rover Defender 110, Rear
- Fits 2021-2022 Land Rover Defender 90, Rear
- Fits 2018-2022 Land Rover Discovery, Rear
- Fits 2022 Land Rover Range Rover, Rear
- Fits 2018-2021 Land Rover Range Rover, Rear
- Fits 2018-2022 Land Rover Range Rover Sport, Rear
Quality Assurance
PowerStop builds Euro-Stop brake wear sensors to meet or exceed OEM requirements for form, fit, and function. SW-1688 is designed for dependable rear brake wear monitoring in the listed Land Rover applications.
