PowerStop Z36-1064 Disc Brake Pad Set - Front or Rear
PowerStop Z36 Truck & SUV Brake Pads
The PowerStop Z36-1064 brake pad set is built for truck and SUV drivers who need stronger stopping performance than stock pads can provide. With a carbon-fiber ceramic friction formula, slotted faces, chamfered edges, and included shims and brake lubricant, this pad set is aimed at towing, hauling, and off-road use where consistent braking and low noise matter.
Key Features
- Carbon-fiber ceramic friction material for severe-duty braking performance
- Low-dust formulation to help reduce brake dust buildup on wheels
- Slotted design and chamfered edges for quieter operation
- Pad shims included for improved noise control
- Brake lubricant included for brake service preparation
- Pad wear sensor included with mechanical sensor type
- Performance-grade disc brake pad set for truck and SUV applications
Product Line Details
The Power Stop Z36 Truck and SUV Carbon-Fiber Ceramic Brake Pads line is engineered as an upgrade over standard replacement pads. The Z36 formula combines ceramic friction with carbon fiber reinforcement to improve stopping response under heavier loads, making it a practical choice for drivers who tow, haul, or spend time on rough roads. The Z36-1064 is part of that truck-and-tow-focused lineup.
Detailed Description
PowerStop Z36-1064 is a disc brake pad set designed for demanding truck and SUV braking conditions. The carbon fiber ceramic composition is paired with slotted surfaces and chamfered edges to support quieter braking and more controlled pad behavior. Outer and inner pad friction material thickness is listed at 20.1 mm, and the set includes pad shims, brake lubricant, and a mechanical pad wear sensor. This part cross-references Wagner Brake SX1064 and Centric Parts 106.10640 for the same application. If you are searching for PowerStop Z36-1064 brake pads for truck and SUV towing, hauling, or off-road service, this part is built for that use case.
What It Helps Address
- Excess brake dust from standard pads
- Brake noise during everyday driving and load-bearing stops
- Reduced braking confidence when towing or hauling
- Brake fade concerns under heavier-duty use
- Need for a performance-oriented replacement pad set
Installation Notes and Tips
Verify vehicle-specific brake pad fitment before ordering, since no fitment rows are listed for this part number. Inspect rotors, calipers, and pad hardware condition during service. Clean the caliper bracket and pad contact points, apply the included brake lubricant where specified, and confirm the wear sensor is routed correctly before road testing. For best results, follow the vehicle service manual and proper pad bedding procedure after installation.
Quality Assurance
PowerStop designs the Z36 line for severe-duty truck and SUV braking applications, with a carbon-fiber ceramic compound intended to balance stopping performance, noise control, and low dust output. Part number Z36-1064 is manufactured to match the listed performance and construction details for the application.
Original: $120.45
-65%$120.45
$42.16PowerStop Z36-1064 Disc Brake Pad Set - Front or Rear
PowerStop Z36 Truck & SUV Brake Pads
The PowerStop Z36-1064 brake pad set is built for truck and SUV drivers who need stronger stopping performance than stock pads can provide. With a carbon-fiber ceramic friction formula, slotted faces, chamfered edges, and included shims and brake lubricant, this pad set is aimed at towing, hauling, and off-road use where consistent braking and low noise matter.
Key Features
- Carbon-fiber ceramic friction material for severe-duty braking performance
- Low-dust formulation to help reduce brake dust buildup on wheels
- Slotted design and chamfered edges for quieter operation
- Pad shims included for improved noise control
- Brake lubricant included for brake service preparation
- Pad wear sensor included with mechanical sensor type
- Performance-grade disc brake pad set for truck and SUV applications
Product Line Details
The Power Stop Z36 Truck and SUV Carbon-Fiber Ceramic Brake Pads line is engineered as an upgrade over standard replacement pads. The Z36 formula combines ceramic friction with carbon fiber reinforcement to improve stopping response under heavier loads, making it a practical choice for drivers who tow, haul, or spend time on rough roads. The Z36-1064 is part of that truck-and-tow-focused lineup.
Detailed Description
PowerStop Z36-1064 is a disc brake pad set designed for demanding truck and SUV braking conditions. The carbon fiber ceramic composition is paired with slotted surfaces and chamfered edges to support quieter braking and more controlled pad behavior. Outer and inner pad friction material thickness is listed at 20.1 mm, and the set includes pad shims, brake lubricant, and a mechanical pad wear sensor. This part cross-references Wagner Brake SX1064 and Centric Parts 106.10640 for the same application. If you are searching for PowerStop Z36-1064 brake pads for truck and SUV towing, hauling, or off-road service, this part is built for that use case.
What It Helps Address
- Excess brake dust from standard pads
- Brake noise during everyday driving and load-bearing stops
- Reduced braking confidence when towing or hauling
- Brake fade concerns under heavier-duty use
- Need for a performance-oriented replacement pad set
Installation Notes and Tips
Verify vehicle-specific brake pad fitment before ordering, since no fitment rows are listed for this part number. Inspect rotors, calipers, and pad hardware condition during service. Clean the caliper bracket and pad contact points, apply the included brake lubricant where specified, and confirm the wear sensor is routed correctly before road testing. For best results, follow the vehicle service manual and proper pad bedding procedure after installation.
Quality Assurance
PowerStop designs the Z36 line for severe-duty truck and SUV braking applications, with a carbon-fiber ceramic compound intended to balance stopping performance, noise control, and low dust output. Part number Z36-1064 is manufactured to match the listed performance and construction details for the application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z36 Truck & SUV Brake Pads
The PowerStop Z36-1064 brake pad set is built for truck and SUV drivers who need stronger stopping performance than stock pads can provide. With a carbon-fiber ceramic friction formula, slotted faces, chamfered edges, and included shims and brake lubricant, this pad set is aimed at towing, hauling, and off-road use where consistent braking and low noise matter.
Key Features
- Carbon-fiber ceramic friction material for severe-duty braking performance
- Low-dust formulation to help reduce brake dust buildup on wheels
- Slotted design and chamfered edges for quieter operation
- Pad shims included for improved noise control
- Brake lubricant included for brake service preparation
- Pad wear sensor included with mechanical sensor type
- Performance-grade disc brake pad set for truck and SUV applications
Product Line Details
The Power Stop Z36 Truck and SUV Carbon-Fiber Ceramic Brake Pads line is engineered as an upgrade over standard replacement pads. The Z36 formula combines ceramic friction with carbon fiber reinforcement to improve stopping response under heavier loads, making it a practical choice for drivers who tow, haul, or spend time on rough roads. The Z36-1064 is part of that truck-and-tow-focused lineup.
Detailed Description
PowerStop Z36-1064 is a disc brake pad set designed for demanding truck and SUV braking conditions. The carbon fiber ceramic composition is paired with slotted surfaces and chamfered edges to support quieter braking and more controlled pad behavior. Outer and inner pad friction material thickness is listed at 20.1 mm, and the set includes pad shims, brake lubricant, and a mechanical pad wear sensor. This part cross-references Wagner Brake SX1064 and Centric Parts 106.10640 for the same application. If you are searching for PowerStop Z36-1064 brake pads for truck and SUV towing, hauling, or off-road service, this part is built for that use case.
What It Helps Address
- Excess brake dust from standard pads
- Brake noise during everyday driving and load-bearing stops
- Reduced braking confidence when towing or hauling
- Brake fade concerns under heavier-duty use
- Need for a performance-oriented replacement pad set
Installation Notes and Tips
Verify vehicle-specific brake pad fitment before ordering, since no fitment rows are listed for this part number. Inspect rotors, calipers, and pad hardware condition during service. Clean the caliper bracket and pad contact points, apply the included brake lubricant where specified, and confirm the wear sensor is routed correctly before road testing. For best results, follow the vehicle service manual and proper pad bedding procedure after installation.
Quality Assurance
PowerStop designs the Z36 line for severe-duty truck and SUV braking applications, with a carbon-fiber ceramic compound intended to balance stopping performance, noise control, and low dust output. Part number Z36-1064 is manufactured to match the listed performance and construction details for the application.
