PowerStop Z37-698 Disc Brake Pad Set - Rear
Rear Carbon-Fiber Ceramic Brake Pads
PowerStop Z37-698 rear brake pads are built for pursuit and fleet use where consistent stopping performance, low dust, and quiet operation matter. This rear disc brake pad set uses a carbon-fiber ceramic friction formula to improve brake efficiency under demanding service conditions.
Compatible with rear brake applications on Chevrolet Impala, Chevrolet Monte Carlo, Buick Regal, Pontiac Grand Prix, and other listed GM platforms, the Z37 Top-Cop line is aimed at drivers who need a direct brake upgrade over stock pads without adding noise or excessive dust.
Key Features
- Carbon-fiber ceramic friction material for performance-focused braking
- Low-dust formula to help reduce wheel buildup
- Slotted pad design with chamfered edges for quieter operation
- Pad shims included for improved noise control
- Mechanical pad wear sensor included
- Brake lubricant included for service preparation
- Premium stainless-steel hardware included
- Outer and inner pad friction thickness: 13.2 mm
Power Stop Z37 Top-Cop Line
The Power Stop Z37 Top-Cop product line is engineered for pursuit and fleet vehicles that see frequent braking and stop-and-go duty. This rear application, part number Z37-698, uses a carbon-fiber ceramic compound to balance durability, pedal feel, and reduced brake dust in daily service.
This part cross-references Raybestos Brakes SP698PPH for the same application.
Detailed Description
PowerStop Z37-698 rear brake pads are a direct-fit replacement for a range of GM vehicles, including rear brake applications on 2000-2010 Chevrolet Impala, 2000-2007 Chevrolet Monte Carlo, 1997-2004 Buick Regal, and 1997-2003 Pontiac Grand Prix. They are also listed for rear fitment on Buick Allure, Buick LaCrosse, Buick Rendezvous, Buick Century, Pontiac Aztek, Pontiac Grand Am, Oldsmobile Alero, Oldsmobile Silhouette, Pontiac Montana, and Oldsmobile Intrigue.
The carbon-fiber ceramic friction material is designed to handle demanding fleet braking while helping keep dust and noise under control. With shims, lubricant, chamfered edges, and a slotted pad profile, Z37-698 supports a cleaner, quieter rear brake service on vehicles that need dependable stopping performance.
Common Issues This Part Can Address
- Brake dust buildup on rear wheels
- Squeal or noise from worn rear pads
- Reduced braking consistency in fleet or pursuit service
- Need for a rear pad upgrade over stock friction material
- Wear sensor replacement during brake service
Installation Notes and Tips
Verify rear axle fitment by year, make, and model before ordering. Inspect rotors, calipers, and hardware condition during installation, and clean all contact points before fitting the new pads. Use the included brake lubricant on approved contact areas only, and confirm the mechanical wear sensor is routed correctly during assembly.
Fits 2000-2010 Chevrolet Impala, rear; 2008-2009 Buick Allure, rear; 2008-2009 Buick LaCrosse, rear; 2002-2007 Buick Rendezvous, rear; 2000-2007 Chevrolet Monte Carlo, rear; 2004-2005 Buick Century, rear; 2001-2005 Pontiac Aztek, rear; 1999-2005 Pontiac Grand Am, rear; 1997-2004 Buick Regal, rear; 1999-2004 Oldsmobile Alero, rear; 2002-2004 Oldsmobile Silhouette, rear; 2002-2004 Pontiac Montana, rear; 1997-2003 Pontiac Grand Prix, rear; 1998-2002 Oldsmobile Intrigue, rear.
Quality Assurance
PowerStop designs the Z37 Top-Cop brake pad line for performance-oriented fleet and pursuit applications, with a focus on low-dust ceramic construction, noise control, and consistent braking behavior. Part number Z37-698 is built as a rear disc brake pad set for the listed GM applications.
Original: $68.57
-65%$68.57
$24.00PowerStop Z37-698 Disc Brake Pad Set - Rear
Rear Carbon-Fiber Ceramic Brake Pads
PowerStop Z37-698 rear brake pads are built for pursuit and fleet use where consistent stopping performance, low dust, and quiet operation matter. This rear disc brake pad set uses a carbon-fiber ceramic friction formula to improve brake efficiency under demanding service conditions.
Compatible with rear brake applications on Chevrolet Impala, Chevrolet Monte Carlo, Buick Regal, Pontiac Grand Prix, and other listed GM platforms, the Z37 Top-Cop line is aimed at drivers who need a direct brake upgrade over stock pads without adding noise or excessive dust.
Key Features
- Carbon-fiber ceramic friction material for performance-focused braking
- Low-dust formula to help reduce wheel buildup
- Slotted pad design with chamfered edges for quieter operation
- Pad shims included for improved noise control
- Mechanical pad wear sensor included
- Brake lubricant included for service preparation
- Premium stainless-steel hardware included
- Outer and inner pad friction thickness: 13.2 mm
Power Stop Z37 Top-Cop Line
The Power Stop Z37 Top-Cop product line is engineered for pursuit and fleet vehicles that see frequent braking and stop-and-go duty. This rear application, part number Z37-698, uses a carbon-fiber ceramic compound to balance durability, pedal feel, and reduced brake dust in daily service.
This part cross-references Raybestos Brakes SP698PPH for the same application.
Detailed Description
PowerStop Z37-698 rear brake pads are a direct-fit replacement for a range of GM vehicles, including rear brake applications on 2000-2010 Chevrolet Impala, 2000-2007 Chevrolet Monte Carlo, 1997-2004 Buick Regal, and 1997-2003 Pontiac Grand Prix. They are also listed for rear fitment on Buick Allure, Buick LaCrosse, Buick Rendezvous, Buick Century, Pontiac Aztek, Pontiac Grand Am, Oldsmobile Alero, Oldsmobile Silhouette, Pontiac Montana, and Oldsmobile Intrigue.
The carbon-fiber ceramic friction material is designed to handle demanding fleet braking while helping keep dust and noise under control. With shims, lubricant, chamfered edges, and a slotted pad profile, Z37-698 supports a cleaner, quieter rear brake service on vehicles that need dependable stopping performance.
Common Issues This Part Can Address
- Brake dust buildup on rear wheels
- Squeal or noise from worn rear pads
- Reduced braking consistency in fleet or pursuit service
- Need for a rear pad upgrade over stock friction material
- Wear sensor replacement during brake service
Installation Notes and Tips
Verify rear axle fitment by year, make, and model before ordering. Inspect rotors, calipers, and hardware condition during installation, and clean all contact points before fitting the new pads. Use the included brake lubricant on approved contact areas only, and confirm the mechanical wear sensor is routed correctly during assembly.
Fits 2000-2010 Chevrolet Impala, rear; 2008-2009 Buick Allure, rear; 2008-2009 Buick LaCrosse, rear; 2002-2007 Buick Rendezvous, rear; 2000-2007 Chevrolet Monte Carlo, rear; 2004-2005 Buick Century, rear; 2001-2005 Pontiac Aztek, rear; 1999-2005 Pontiac Grand Am, rear; 1997-2004 Buick Regal, rear; 1999-2004 Oldsmobile Alero, rear; 2002-2004 Oldsmobile Silhouette, rear; 2002-2004 Pontiac Montana, rear; 1997-2003 Pontiac Grand Prix, rear; 1998-2002 Oldsmobile Intrigue, rear.
Quality Assurance
PowerStop designs the Z37 Top-Cop brake pad line for performance-oriented fleet and pursuit applications, with a focus on low-dust ceramic construction, noise control, and consistent braking behavior. Part number Z37-698 is built as a rear disc brake pad set for the listed GM applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Carbon-Fiber Ceramic Brake Pads
PowerStop Z37-698 rear brake pads are built for pursuit and fleet use where consistent stopping performance, low dust, and quiet operation matter. This rear disc brake pad set uses a carbon-fiber ceramic friction formula to improve brake efficiency under demanding service conditions.
Compatible with rear brake applications on Chevrolet Impala, Chevrolet Monte Carlo, Buick Regal, Pontiac Grand Prix, and other listed GM platforms, the Z37 Top-Cop line is aimed at drivers who need a direct brake upgrade over stock pads without adding noise or excessive dust.
Key Features
- Carbon-fiber ceramic friction material for performance-focused braking
- Low-dust formula to help reduce wheel buildup
- Slotted pad design with chamfered edges for quieter operation
- Pad shims included for improved noise control
- Mechanical pad wear sensor included
- Brake lubricant included for service preparation
- Premium stainless-steel hardware included
- Outer and inner pad friction thickness: 13.2 mm
Power Stop Z37 Top-Cop Line
The Power Stop Z37 Top-Cop product line is engineered for pursuit and fleet vehicles that see frequent braking and stop-and-go duty. This rear application, part number Z37-698, uses a carbon-fiber ceramic compound to balance durability, pedal feel, and reduced brake dust in daily service.
This part cross-references Raybestos Brakes SP698PPH for the same application.
Detailed Description
PowerStop Z37-698 rear brake pads are a direct-fit replacement for a range of GM vehicles, including rear brake applications on 2000-2010 Chevrolet Impala, 2000-2007 Chevrolet Monte Carlo, 1997-2004 Buick Regal, and 1997-2003 Pontiac Grand Prix. They are also listed for rear fitment on Buick Allure, Buick LaCrosse, Buick Rendezvous, Buick Century, Pontiac Aztek, Pontiac Grand Am, Oldsmobile Alero, Oldsmobile Silhouette, Pontiac Montana, and Oldsmobile Intrigue.
The carbon-fiber ceramic friction material is designed to handle demanding fleet braking while helping keep dust and noise under control. With shims, lubricant, chamfered edges, and a slotted pad profile, Z37-698 supports a cleaner, quieter rear brake service on vehicles that need dependable stopping performance.
Common Issues This Part Can Address
- Brake dust buildup on rear wheels
- Squeal or noise from worn rear pads
- Reduced braking consistency in fleet or pursuit service
- Need for a rear pad upgrade over stock friction material
- Wear sensor replacement during brake service
Installation Notes and Tips
Verify rear axle fitment by year, make, and model before ordering. Inspect rotors, calipers, and hardware condition during installation, and clean all contact points before fitting the new pads. Use the included brake lubricant on approved contact areas only, and confirm the mechanical wear sensor is routed correctly during assembly.
Fits 2000-2010 Chevrolet Impala, rear; 2008-2009 Buick Allure, rear; 2008-2009 Buick LaCrosse, rear; 2002-2007 Buick Rendezvous, rear; 2000-2007 Chevrolet Monte Carlo, rear; 2004-2005 Buick Century, rear; 2001-2005 Pontiac Aztek, rear; 1999-2005 Pontiac Grand Am, rear; 1997-2004 Buick Regal, rear; 1999-2004 Oldsmobile Alero, rear; 2002-2004 Oldsmobile Silhouette, rear; 2002-2004 Pontiac Montana, rear; 1997-2003 Pontiac Grand Prix, rear; 1998-2002 Oldsmobile Intrigue, rear.
Quality Assurance
PowerStop designs the Z37 Top-Cop brake pad line for performance-oriented fleet and pursuit applications, with a focus on low-dust ceramic construction, noise control, and consistent braking behavior. Part number Z37-698 is built as a rear disc brake pad set for the listed GM applications.
