PowerStop Z47-1066 Disc Brake Pad Set - Front
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47 MD and Fleet brake pads are built for medium-duty and last-mile vehicles that run at full GVW on a daily basis. The semi-metallic, carbon-fiber-infused friction formula is aimed at consistent stopping performance, reduced downtime, and lower cost per mile in severe-duty service.
Part number Z47-1066 is part of the Power Stop Z47 MD and Fleet line, a brake pad range focused on demanding commercial use where durability and repeatable braking matter. This set includes premium stainless-steel hardware, plus chamfered edges, shims, and a scorched friction surface for a more complete brake service.
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance-grade brake pad set for medium-duty and fleet use
- Friction mechanically attached to the backing plate for shear resistance
- Chamfered edges and scorched friction surface
- Pad shims included
- Premium stainless-steel hardware included
- Outer pad thickness: 19.7 mm; inner pad thickness: 19.7 mm
Detailed Product Overview
PowerStop Z47-1066 is engineered as an upgrade over stock brake pads for vehicles that spend long hours in service and carry heavy loads. The semi-metallic compound is reinforced with carbon fiber to strengthen the pad material and support stable braking under demanding operating conditions. Mechanical attachment of the friction material to the backing plate adds shear resistance, which is important in fleet environments where brake components see repeated heat and load cycles. This part cross-references Ford 5C3Z 2001-BA and 8C3Z 2001-C for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated stops in heavy-duty service
- Premature pad wear from daily full-GVW operation
- Noise and uneven contact associated with worn pad hardware
- Extended downtime from incomplete brake service parts
- Reduced braking consistency in medium-duty fleet use
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and pad contact points, then install the included stainless-steel hardware and shims as part of the brake service. Verify pad orientation and confirm the vehicle application before assembly. For fitment reference, this part is listed for vehicles such as Fits 2005-2007 Ford F-250 Super Duty, front; Fits 2005-2007 Ford F-350 Super Duty, front; Fits 2005-2007 Ford F-450 Super Duty, front; Fits 2005-2007 Ford F-550 Super Duty, front; Fits 2005-2007 Ford E-350 Super Duty, front; Fits 2005-2007 Ford E-450 Super Duty, front; Fits 2005-2007 Ford E-550 Super Duty, front; Fits 2005-2007 Ford Excursion, front; Fits 2005-2007 Ford F53, front; Fits 2005-2007 Ford F59, front; Fits 2005-2007 Ford E-350 Club Wagon, front.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty braking demands, using a carbon-fiber-enhanced semi-metallic compound and hardware intended to support a complete brake job. Part number Z47-1066 is built to meet the needs of commercial and fleet service applications.
Original: $106.98
-65%$106.98
$37.44PowerStop Z47-1066 Disc Brake Pad Set - Front
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47 MD and Fleet brake pads are built for medium-duty and last-mile vehicles that run at full GVW on a daily basis. The semi-metallic, carbon-fiber-infused friction formula is aimed at consistent stopping performance, reduced downtime, and lower cost per mile in severe-duty service.
Part number Z47-1066 is part of the Power Stop Z47 MD and Fleet line, a brake pad range focused on demanding commercial use where durability and repeatable braking matter. This set includes premium stainless-steel hardware, plus chamfered edges, shims, and a scorched friction surface for a more complete brake service.
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance-grade brake pad set for medium-duty and fleet use
- Friction mechanically attached to the backing plate for shear resistance
- Chamfered edges and scorched friction surface
- Pad shims included
- Premium stainless-steel hardware included
- Outer pad thickness: 19.7 mm; inner pad thickness: 19.7 mm
Detailed Product Overview
PowerStop Z47-1066 is engineered as an upgrade over stock brake pads for vehicles that spend long hours in service and carry heavy loads. The semi-metallic compound is reinforced with carbon fiber to strengthen the pad material and support stable braking under demanding operating conditions. Mechanical attachment of the friction material to the backing plate adds shear resistance, which is important in fleet environments where brake components see repeated heat and load cycles. This part cross-references Ford 5C3Z 2001-BA and 8C3Z 2001-C for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated stops in heavy-duty service
- Premature pad wear from daily full-GVW operation
- Noise and uneven contact associated with worn pad hardware
- Extended downtime from incomplete brake service parts
- Reduced braking consistency in medium-duty fleet use
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and pad contact points, then install the included stainless-steel hardware and shims as part of the brake service. Verify pad orientation and confirm the vehicle application before assembly. For fitment reference, this part is listed for vehicles such as Fits 2005-2007 Ford F-250 Super Duty, front; Fits 2005-2007 Ford F-350 Super Duty, front; Fits 2005-2007 Ford F-450 Super Duty, front; Fits 2005-2007 Ford F-550 Super Duty, front; Fits 2005-2007 Ford E-350 Super Duty, front; Fits 2005-2007 Ford E-450 Super Duty, front; Fits 2005-2007 Ford E-550 Super Duty, front; Fits 2005-2007 Ford Excursion, front; Fits 2005-2007 Ford F53, front; Fits 2005-2007 Ford F59, front; Fits 2005-2007 Ford E-350 Club Wagon, front.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty braking demands, using a carbon-fiber-enhanced semi-metallic compound and hardware intended to support a complete brake job. Part number Z47-1066 is built to meet the needs of commercial and fleet service applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47 MD and Fleet brake pads are built for medium-duty and last-mile vehicles that run at full GVW on a daily basis. The semi-metallic, carbon-fiber-infused friction formula is aimed at consistent stopping performance, reduced downtime, and lower cost per mile in severe-duty service.
Part number Z47-1066 is part of the Power Stop Z47 MD and Fleet line, a brake pad range focused on demanding commercial use where durability and repeatable braking matter. This set includes premium stainless-steel hardware, plus chamfered edges, shims, and a scorched friction surface for a more complete brake service.
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance-grade brake pad set for medium-duty and fleet use
- Friction mechanically attached to the backing plate for shear resistance
- Chamfered edges and scorched friction surface
- Pad shims included
- Premium stainless-steel hardware included
- Outer pad thickness: 19.7 mm; inner pad thickness: 19.7 mm
Detailed Product Overview
PowerStop Z47-1066 is engineered as an upgrade over stock brake pads for vehicles that spend long hours in service and carry heavy loads. The semi-metallic compound is reinforced with carbon fiber to strengthen the pad material and support stable braking under demanding operating conditions. Mechanical attachment of the friction material to the backing plate adds shear resistance, which is important in fleet environments where brake components see repeated heat and load cycles. This part cross-references Ford 5C3Z 2001-BA and 8C3Z 2001-C for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated stops in heavy-duty service
- Premature pad wear from daily full-GVW operation
- Noise and uneven contact associated with worn pad hardware
- Extended downtime from incomplete brake service parts
- Reduced braking consistency in medium-duty fleet use
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and pad contact points, then install the included stainless-steel hardware and shims as part of the brake service. Verify pad orientation and confirm the vehicle application before assembly. For fitment reference, this part is listed for vehicles such as Fits 2005-2007 Ford F-250 Super Duty, front; Fits 2005-2007 Ford F-350 Super Duty, front; Fits 2005-2007 Ford F-450 Super Duty, front; Fits 2005-2007 Ford F-550 Super Duty, front; Fits 2005-2007 Ford E-350 Super Duty, front; Fits 2005-2007 Ford E-450 Super Duty, front; Fits 2005-2007 Ford E-550 Super Duty, front; Fits 2005-2007 Ford Excursion, front; Fits 2005-2007 Ford F53, front; Fits 2005-2007 Ford F59, front; Fits 2005-2007 Ford E-350 Club Wagon, front.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty braking demands, using a carbon-fiber-enhanced semi-metallic compound and hardware intended to support a complete brake job. Part number Z47-1066 is built to meet the needs of commercial and fleet service applications.
