PowerStop Z47-1066C Disc Brake Pad Set - Rear
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-1066C rear disc brake pads are built for medium-duty and last-mile fleet vehicles that run at or near full GVW on a daily basis. This rear Z47 MD and Fleet carbon-fiber semi-metallic brake pad set adds durable stopping performance, consistent pedal feel, and reduced downtime for demanding service cycles.
Compatible with rear brake applications for fleet vehicles that need dependable braking under load, the PowerStop Z47-1066C is engineered for severe-duty use and frequent stop-and-go operation.
Key Features
- Semi-metallic friction formula infused with carbon fiber for added compound strength
- Designed for medium-duty and fleet vehicles operating at full GVW
- Mechanical friction attachment to the backing plate for high shear resistance
- Slotted design with chamfered edges for controlled pad behavior
- Scorched friction surface for quicker bedding characteristics
- Electronic pad wear sensor included
- Pad shims included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 20.3 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is focused on severe-duty braking needs for commercial and last-mile vehicles. This line uses a carbon-fiber reinforced semi-metallic compound to support long service life and lower cost-per-mile in demanding rear brake applications.
Detailed Description
The PowerStop Z47-1066C rear brake pad set is a performance-grade replacement for stock pads on fleet vehicles that carry heavy loads and make frequent stops. The semi-metallic friction material is reinforced with carbon fiber, while the friction material is mechanically attached to the backing plate for added shear resistance. Slotted, chamfered, and scorched pad surfaces help support stable braking behavior and easier break-in. For buyers searching for rear brake pads for medium-duty fleet trucks, last-mile delivery vehicles, or severe-duty service use, PowerStop Z47-1066C provides a focused solution built around uptime and durability. This part number, Z47-1066C, is also a practical reference when sourcing rear PowerStop brake pads for fleet maintenance programs.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake fade during repeated stop-and-go driving
- Reduced braking performance when vehicles operate near full GVW
- Premature pad wear in commercial fleet service
- Noise and uneven pad contact during braking
- Downtime caused by frequent rear brake service
Installation Notes and Tips
Confirm rear axle fitment before ordering and match the pad shape to the existing caliper hardware. Inspect rotors, calipers, and wear sensors during service, and clean the mounting surfaces before installation. Use proper brake service procedures and follow the vehicle manufacturer’s bedding recommendations after installing Z47-1066C pads.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for demanding commercial braking conditions, with stainless-steel hardware, an electronic wear sensor, and a reinforced semi-metallic compound selected for fleet use. Verify application details against the vehicle’s brake system before installation.
Original: $119.02
-65%$119.02
$41.66PowerStop Z47-1066C Disc Brake Pad Set - Rear
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-1066C rear disc brake pads are built for medium-duty and last-mile fleet vehicles that run at or near full GVW on a daily basis. This rear Z47 MD and Fleet carbon-fiber semi-metallic brake pad set adds durable stopping performance, consistent pedal feel, and reduced downtime for demanding service cycles.
Compatible with rear brake applications for fleet vehicles that need dependable braking under load, the PowerStop Z47-1066C is engineered for severe-duty use and frequent stop-and-go operation.
Key Features
- Semi-metallic friction formula infused with carbon fiber for added compound strength
- Designed for medium-duty and fleet vehicles operating at full GVW
- Mechanical friction attachment to the backing plate for high shear resistance
- Slotted design with chamfered edges for controlled pad behavior
- Scorched friction surface for quicker bedding characteristics
- Electronic pad wear sensor included
- Pad shims included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 20.3 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is focused on severe-duty braking needs for commercial and last-mile vehicles. This line uses a carbon-fiber reinforced semi-metallic compound to support long service life and lower cost-per-mile in demanding rear brake applications.
Detailed Description
The PowerStop Z47-1066C rear brake pad set is a performance-grade replacement for stock pads on fleet vehicles that carry heavy loads and make frequent stops. The semi-metallic friction material is reinforced with carbon fiber, while the friction material is mechanically attached to the backing plate for added shear resistance. Slotted, chamfered, and scorched pad surfaces help support stable braking behavior and easier break-in. For buyers searching for rear brake pads for medium-duty fleet trucks, last-mile delivery vehicles, or severe-duty service use, PowerStop Z47-1066C provides a focused solution built around uptime and durability. This part number, Z47-1066C, is also a practical reference when sourcing rear PowerStop brake pads for fleet maintenance programs.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake fade during repeated stop-and-go driving
- Reduced braking performance when vehicles operate near full GVW
- Premature pad wear in commercial fleet service
- Noise and uneven pad contact during braking
- Downtime caused by frequent rear brake service
Installation Notes and Tips
Confirm rear axle fitment before ordering and match the pad shape to the existing caliper hardware. Inspect rotors, calipers, and wear sensors during service, and clean the mounting surfaces before installation. Use proper brake service procedures and follow the vehicle manufacturer’s bedding recommendations after installing Z47-1066C pads.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for demanding commercial braking conditions, with stainless-steel hardware, an electronic wear sensor, and a reinforced semi-metallic compound selected for fleet use. Verify application details against the vehicle’s brake system before installation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-1066C rear disc brake pads are built for medium-duty and last-mile fleet vehicles that run at or near full GVW on a daily basis. This rear Z47 MD and Fleet carbon-fiber semi-metallic brake pad set adds durable stopping performance, consistent pedal feel, and reduced downtime for demanding service cycles.
Compatible with rear brake applications for fleet vehicles that need dependable braking under load, the PowerStop Z47-1066C is engineered for severe-duty use and frequent stop-and-go operation.
Key Features
- Semi-metallic friction formula infused with carbon fiber for added compound strength
- Designed for medium-duty and fleet vehicles operating at full GVW
- Mechanical friction attachment to the backing plate for high shear resistance
- Slotted design with chamfered edges for controlled pad behavior
- Scorched friction surface for quicker bedding characteristics
- Electronic pad wear sensor included
- Pad shims included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 20.3 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is focused on severe-duty braking needs for commercial and last-mile vehicles. This line uses a carbon-fiber reinforced semi-metallic compound to support long service life and lower cost-per-mile in demanding rear brake applications.
Detailed Description
The PowerStop Z47-1066C rear brake pad set is a performance-grade replacement for stock pads on fleet vehicles that carry heavy loads and make frequent stops. The semi-metallic friction material is reinforced with carbon fiber, while the friction material is mechanically attached to the backing plate for added shear resistance. Slotted, chamfered, and scorched pad surfaces help support stable braking behavior and easier break-in. For buyers searching for rear brake pads for medium-duty fleet trucks, last-mile delivery vehicles, or severe-duty service use, PowerStop Z47-1066C provides a focused solution built around uptime and durability. This part number, Z47-1066C, is also a practical reference when sourcing rear PowerStop brake pads for fleet maintenance programs.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake fade during repeated stop-and-go driving
- Reduced braking performance when vehicles operate near full GVW
- Premature pad wear in commercial fleet service
- Noise and uneven pad contact during braking
- Downtime caused by frequent rear brake service
Installation Notes and Tips
Confirm rear axle fitment before ordering and match the pad shape to the existing caliper hardware. Inspect rotors, calipers, and wear sensors during service, and clean the mounting surfaces before installation. Use proper brake service procedures and follow the vehicle manufacturer’s bedding recommendations after installing Z47-1066C pads.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for demanding commercial braking conditions, with stainless-steel hardware, an electronic wear sensor, and a reinforced semi-metallic compound selected for fleet use. Verify application details against the vehicle’s brake system before installation.
