PowerStop Z47-1316 Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1316 front brake pads are built for Mercedes-Benz Metris and Sprinter 2500 applications that operate at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced formula is made for medium-duty and last-mile fleet service where consistent stopping performance and lower cost-per-mile matter.
The Z47 MD and Fleet line focuses on durable braking performance for demanding commercial use. For Mercedes-Benz Metris and Mercedes-Benz Sprinter 2500 front brake pad replacement, this part number delivers a performance-grade pad set with chamfered edges, scorched friction surfaces, pad shims, and stainless-steel hardware for a more complete brake service.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance-grade front disc brake pad set
- Mechanical friction attachment for high shear resistance
- Chamfered edges for smoother pad engagement
- Scorched friction surface for quicker break-in
- Pad shims included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.5 mm
Detailed Product Overview
PowerStop Z47-1316 is engineered as an upgrade over stock front brake pads for fleet vehicles that carry heavy loads and see frequent stop-and-go duty. The semi-metallic compound uses carbon fiber to strengthen the pad material, helping support long service life and stable braking performance in severe-duty conditions. The friction material is mechanically attached to the backing plate to improve shear resistance under repeated braking loads.
This part is a direct-fit front brake pad solution for 2019-2023 Mercedes-Benz Metris, 2016-2018 Mercedes-Benz Metris, 2010-2018 Mercedes-Benz Sprinter 2500, and 2007-2009 Dodge Sprinter 2500. If you are searching for PowerStop Z47-1316 front brake pads for Mercedes-Benz Metris or Sprinter 2500 fleet service, this application-specific pad set matches the listed front positions and supports commercial braking demands.
This part cross-references 005 420 52 20 and 906 421 04 00 for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated heavy-load stops
- Premature pad wear in daily fleet operation
- Reduced braking consistency under full GVW use
- Noise and uneven contact from worn front pads
- Brake service downtime caused by incomplete hardware replacement
Installation Notes and Tips
Install on the front axle only for the listed Mercedes-Benz Metris, Mercedes-Benz Sprinter 2500, and Dodge Sprinter 2500 applications. Verify rotor condition, caliper operation, and pad fitment before assembly. Pad wear sensor is not included; 2016-2018 Mercedes-Benz Metris applications require a wear sensor sold separately. Follow proper brake-in procedures after installation to help the pads seat correctly.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty commercial braking needs, with a carbon-fiber reinforced semi-metallic compound, mechanically attached friction material, and included stainless-steel hardware to support a complete front brake service.
Original: $84.57
-65%$84.57
$29.60PowerStop Z47-1316 Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1316 front brake pads are built for Mercedes-Benz Metris and Sprinter 2500 applications that operate at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced formula is made for medium-duty and last-mile fleet service where consistent stopping performance and lower cost-per-mile matter.
The Z47 MD and Fleet line focuses on durable braking performance for demanding commercial use. For Mercedes-Benz Metris and Mercedes-Benz Sprinter 2500 front brake pad replacement, this part number delivers a performance-grade pad set with chamfered edges, scorched friction surfaces, pad shims, and stainless-steel hardware for a more complete brake service.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance-grade front disc brake pad set
- Mechanical friction attachment for high shear resistance
- Chamfered edges for smoother pad engagement
- Scorched friction surface for quicker break-in
- Pad shims included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.5 mm
Detailed Product Overview
PowerStop Z47-1316 is engineered as an upgrade over stock front brake pads for fleet vehicles that carry heavy loads and see frequent stop-and-go duty. The semi-metallic compound uses carbon fiber to strengthen the pad material, helping support long service life and stable braking performance in severe-duty conditions. The friction material is mechanically attached to the backing plate to improve shear resistance under repeated braking loads.
This part is a direct-fit front brake pad solution for 2019-2023 Mercedes-Benz Metris, 2016-2018 Mercedes-Benz Metris, 2010-2018 Mercedes-Benz Sprinter 2500, and 2007-2009 Dodge Sprinter 2500. If you are searching for PowerStop Z47-1316 front brake pads for Mercedes-Benz Metris or Sprinter 2500 fleet service, this application-specific pad set matches the listed front positions and supports commercial braking demands.
This part cross-references 005 420 52 20 and 906 421 04 00 for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated heavy-load stops
- Premature pad wear in daily fleet operation
- Reduced braking consistency under full GVW use
- Noise and uneven contact from worn front pads
- Brake service downtime caused by incomplete hardware replacement
Installation Notes and Tips
Install on the front axle only for the listed Mercedes-Benz Metris, Mercedes-Benz Sprinter 2500, and Dodge Sprinter 2500 applications. Verify rotor condition, caliper operation, and pad fitment before assembly. Pad wear sensor is not included; 2016-2018 Mercedes-Benz Metris applications require a wear sensor sold separately. Follow proper brake-in procedures after installation to help the pads seat correctly.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty commercial braking needs, with a carbon-fiber reinforced semi-metallic compound, mechanically attached friction material, and included stainless-steel hardware to support a complete front brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1316 front brake pads are built for Mercedes-Benz Metris and Sprinter 2500 applications that operate at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced formula is made for medium-duty and last-mile fleet service where consistent stopping performance and lower cost-per-mile matter.
The Z47 MD and Fleet line focuses on durable braking performance for demanding commercial use. For Mercedes-Benz Metris and Mercedes-Benz Sprinter 2500 front brake pad replacement, this part number delivers a performance-grade pad set with chamfered edges, scorched friction surfaces, pad shims, and stainless-steel hardware for a more complete brake service.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance-grade front disc brake pad set
- Mechanical friction attachment for high shear resistance
- Chamfered edges for smoother pad engagement
- Scorched friction surface for quicker break-in
- Pad shims included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.5 mm
Detailed Product Overview
PowerStop Z47-1316 is engineered as an upgrade over stock front brake pads for fleet vehicles that carry heavy loads and see frequent stop-and-go duty. The semi-metallic compound uses carbon fiber to strengthen the pad material, helping support long service life and stable braking performance in severe-duty conditions. The friction material is mechanically attached to the backing plate to improve shear resistance under repeated braking loads.
This part is a direct-fit front brake pad solution for 2019-2023 Mercedes-Benz Metris, 2016-2018 Mercedes-Benz Metris, 2010-2018 Mercedes-Benz Sprinter 2500, and 2007-2009 Dodge Sprinter 2500. If you are searching for PowerStop Z47-1316 front brake pads for Mercedes-Benz Metris or Sprinter 2500 fleet service, this application-specific pad set matches the listed front positions and supports commercial braking demands.
This part cross-references 005 420 52 20 and 906 421 04 00 for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated heavy-load stops
- Premature pad wear in daily fleet operation
- Reduced braking consistency under full GVW use
- Noise and uneven contact from worn front pads
- Brake service downtime caused by incomplete hardware replacement
Installation Notes and Tips
Install on the front axle only for the listed Mercedes-Benz Metris, Mercedes-Benz Sprinter 2500, and Dodge Sprinter 2500 applications. Verify rotor condition, caliper operation, and pad fitment before assembly. Pad wear sensor is not included; 2016-2018 Mercedes-Benz Metris applications require a wear sensor sold separately. Follow proper brake-in procedures after installation to help the pads seat correctly.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty commercial braking needs, with a carbon-fiber reinforced semi-metallic compound, mechanically attached friction material, and included stainless-steel hardware to support a complete front brake service.
