PowerStop Z47-1318 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
The PowerStop Z47-1318 rear disc brake pad set is built for medium-duty and last mile fleet vehicles that run at or near full GVW on a daily basis. It is a fitment-based upgrade for Mercedes-Benz Sprinter 3500 rear brake service and Dodge Sprinter 3500 rear brake replacement, with a carbon-fiber infused semi-metallic friction formula for consistent stopping performance.
Power Stop’s Z47 MD and Fleet line focuses on reduced cost-per-mile and extended uptime for demanding commercial use. The Z47-1318 rear pad set includes premium stainless-steel hardware and is engineered for severe-duty braking needs on the Mercedes-Benz Sprinter 3500 and Sprinter 3500XD rear axle applications.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for fleet and medium-duty service
- Mechanical friction attachment for strong shear resistance
- Chamfered edges for smoother pad engagement
- Scorched friction surface for quicker break-in
- Pad shims included for noise control support
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.4 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is aimed at vehicles that see frequent stops, heavy loads, and daily commercial operation. This rear brake pad formulation uses a semi-metallic compound infused with carbon fiber to help maintain braking performance under severe-duty conditions while supporting longer service intervals in fleet use.
Detailed Description
PowerStop Z47-1318 rear brake pads are designed for 2007-2009 Dodge Sprinter 3500 rear brake service and 2010-2018 Mercedes-Benz Sprinter 3500 rear brake replacement, plus 2018 Mercedes-Benz Sprinter 3500XD rear applications. The pad design uses a semi-metallic compound with carbon-fiber content to strengthen the friction material, while the friction layer is mechanically attached to the backing plate for added shear resistance. This setup supports dependable braking performance for commercial vans operating under heavy load conditions.
This part cross-references 2E0698451A and 006 420 45 20 for the same application.
What This Part Helps Address
- Rear brake wear from frequent stop-and-go fleet driving
- Reduced braking consistency under full GVW operation
- Noise and vibration concerns during brake service
- Need for a rear pad replacement with included hardware
- Brake maintenance on Mercedes-Benz Sprinter 3500 and Dodge Sprinter 3500 rear axles
Installation Notes and Tips
Verify rear axle fitment by year, make, and model before installation. Inspect rotors, calipers, and slide hardware during brake service, and clean the mounting surfaces before fitting the new pads. The included stainless-steel hardware and pad shims support a complete rear brake job, and the scorched friction surface helps shorten the initial bedding period.
Quality Assurance
PowerStop manufactures the Z47 MD and Fleet line for severe-duty fleet braking applications, with a focus on friction stability, backing plate retention, and service durability. The Z47-1318 is built to meet the demands of daily commercial use on compatible Mercedes-Benz Sprinter 3500, Sprinter 3500XD, and Dodge Sprinter 3500 rear brake systems.
Original: $81.78
-65%$81.78
$28.62PowerStop Z47-1318 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
The PowerStop Z47-1318 rear disc brake pad set is built for medium-duty and last mile fleet vehicles that run at or near full GVW on a daily basis. It is a fitment-based upgrade for Mercedes-Benz Sprinter 3500 rear brake service and Dodge Sprinter 3500 rear brake replacement, with a carbon-fiber infused semi-metallic friction formula for consistent stopping performance.
Power Stop’s Z47 MD and Fleet line focuses on reduced cost-per-mile and extended uptime for demanding commercial use. The Z47-1318 rear pad set includes premium stainless-steel hardware and is engineered for severe-duty braking needs on the Mercedes-Benz Sprinter 3500 and Sprinter 3500XD rear axle applications.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for fleet and medium-duty service
- Mechanical friction attachment for strong shear resistance
- Chamfered edges for smoother pad engagement
- Scorched friction surface for quicker break-in
- Pad shims included for noise control support
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.4 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is aimed at vehicles that see frequent stops, heavy loads, and daily commercial operation. This rear brake pad formulation uses a semi-metallic compound infused with carbon fiber to help maintain braking performance under severe-duty conditions while supporting longer service intervals in fleet use.
Detailed Description
PowerStop Z47-1318 rear brake pads are designed for 2007-2009 Dodge Sprinter 3500 rear brake service and 2010-2018 Mercedes-Benz Sprinter 3500 rear brake replacement, plus 2018 Mercedes-Benz Sprinter 3500XD rear applications. The pad design uses a semi-metallic compound with carbon-fiber content to strengthen the friction material, while the friction layer is mechanically attached to the backing plate for added shear resistance. This setup supports dependable braking performance for commercial vans operating under heavy load conditions.
This part cross-references 2E0698451A and 006 420 45 20 for the same application.
What This Part Helps Address
- Rear brake wear from frequent stop-and-go fleet driving
- Reduced braking consistency under full GVW operation
- Noise and vibration concerns during brake service
- Need for a rear pad replacement with included hardware
- Brake maintenance on Mercedes-Benz Sprinter 3500 and Dodge Sprinter 3500 rear axles
Installation Notes and Tips
Verify rear axle fitment by year, make, and model before installation. Inspect rotors, calipers, and slide hardware during brake service, and clean the mounting surfaces before fitting the new pads. The included stainless-steel hardware and pad shims support a complete rear brake job, and the scorched friction surface helps shorten the initial bedding period.
Quality Assurance
PowerStop manufactures the Z47 MD and Fleet line for severe-duty fleet braking applications, with a focus on friction stability, backing plate retention, and service durability. The Z47-1318 is built to meet the demands of daily commercial use on compatible Mercedes-Benz Sprinter 3500, Sprinter 3500XD, and Dodge Sprinter 3500 rear brake systems.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Severe-Duty Fleet Use
The PowerStop Z47-1318 rear disc brake pad set is built for medium-duty and last mile fleet vehicles that run at or near full GVW on a daily basis. It is a fitment-based upgrade for Mercedes-Benz Sprinter 3500 rear brake service and Dodge Sprinter 3500 rear brake replacement, with a carbon-fiber infused semi-metallic friction formula for consistent stopping performance.
Power Stop’s Z47 MD and Fleet line focuses on reduced cost-per-mile and extended uptime for demanding commercial use. The Z47-1318 rear pad set includes premium stainless-steel hardware and is engineered for severe-duty braking needs on the Mercedes-Benz Sprinter 3500 and Sprinter 3500XD rear axle applications.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for fleet and medium-duty service
- Mechanical friction attachment for strong shear resistance
- Chamfered edges for smoother pad engagement
- Scorched friction surface for quicker break-in
- Pad shims included for noise control support
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.4 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is aimed at vehicles that see frequent stops, heavy loads, and daily commercial operation. This rear brake pad formulation uses a semi-metallic compound infused with carbon fiber to help maintain braking performance under severe-duty conditions while supporting longer service intervals in fleet use.
Detailed Description
PowerStop Z47-1318 rear brake pads are designed for 2007-2009 Dodge Sprinter 3500 rear brake service and 2010-2018 Mercedes-Benz Sprinter 3500 rear brake replacement, plus 2018 Mercedes-Benz Sprinter 3500XD rear applications. The pad design uses a semi-metallic compound with carbon-fiber content to strengthen the friction material, while the friction layer is mechanically attached to the backing plate for added shear resistance. This setup supports dependable braking performance for commercial vans operating under heavy load conditions.
This part cross-references 2E0698451A and 006 420 45 20 for the same application.
What This Part Helps Address
- Rear brake wear from frequent stop-and-go fleet driving
- Reduced braking consistency under full GVW operation
- Noise and vibration concerns during brake service
- Need for a rear pad replacement with included hardware
- Brake maintenance on Mercedes-Benz Sprinter 3500 and Dodge Sprinter 3500 rear axles
Installation Notes and Tips
Verify rear axle fitment by year, make, and model before installation. Inspect rotors, calipers, and slide hardware during brake service, and clean the mounting surfaces before fitting the new pads. The included stainless-steel hardware and pad shims support a complete rear brake job, and the scorched friction surface helps shorten the initial bedding period.
Quality Assurance
PowerStop manufactures the Z47 MD and Fleet line for severe-duty fleet braking applications, with a focus on friction stability, backing plate retention, and service durability. The Z47-1318 is built to meet the demands of daily commercial use on compatible Mercedes-Benz Sprinter 3500, Sprinter 3500XD, and Dodge Sprinter 3500 rear brake systems.
