PowerStop Z47-1540 Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1540 front brake pads are built for Ram ProMaster and ProMaster EV applications that run at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced pad set is aimed at medium-duty and last-mile fleet service where consistent stopping performance and lower cost-per-mile matter.
The Z47 MD and Fleet line focuses on durability, friction stability, and reduced downtime for demanding commercial braking conditions.
Key Features
- Semi-metallic friction formula with carbon-fiber reinforcement for added compound strength
- Designed for severe-duty fleet braking and daily full-GVW operation
- Mechanically attached friction material for high shear resistance
- Slotted pad design with scorched friction surface
- Pad shims included for improved fit and noise control
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.3 mm
Detailed Description
PowerStop Z47-1540 is a front disc brake pad set engineered for 2014-2025 Ram ProMaster 1500, 2500, and 3500 models, plus 2024-2025 Ram ProMaster EV front brake applications. The semi-metallic compound is infused with carbon fiber to strengthen the friction material and support consistent braking under heavy load. The friction material is mechanically attached to the backing plate for added shear resistance, while the slotted design and scorched surface help prepare the pads for service.
This part number, Z47-1540, is built for fleet operators who need dependable front brake performance on Ram ProMaster vans used in delivery, service, and other high-duty cycles. This part cross-references Chrysler OE numbers 6823 0105AA and 6823 0105AB for the same application.
What It Helps Address
- Brake fade during repeated stops with heavy cargo
- Premature pad wear in daily commercial use
- Inconsistent pedal feel under full GVW operation
- Noise and vibration concerns from worn front pads
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Confirm front axle fitment before installation on Ram ProMaster 1500, ProMaster 2500, ProMaster 3500, or ProMaster EV models. Inspect rotors, calipers, and wear sensors during service, and replace any damaged hardware or worn components as needed. The included stainless-steel hardware and pad shims support a cleaner brake job, and the electronic wear sensor should be connected where equipped.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line as an upgrade over stock braking for medium-duty and last-mile fleet vehicles. Part number Z47-1540 is built with a carbon-fiber reinforced semi-metallic compound, mechanically attached friction material, and included stainless-steel hardware for service-ready front brake replacement.
PowerStop Z47-1540 Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1540 front brake pads are built for Ram ProMaster and ProMaster EV applications that run at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced pad set is aimed at medium-duty and last-mile fleet service where consistent stopping performance and lower cost-per-mile matter.
The Z47 MD and Fleet line focuses on durability, friction stability, and reduced downtime for demanding commercial braking conditions.
Key Features
- Semi-metallic friction formula with carbon-fiber reinforcement for added compound strength
- Designed for severe-duty fleet braking and daily full-GVW operation
- Mechanically attached friction material for high shear resistance
- Slotted pad design with scorched friction surface
- Pad shims included for improved fit and noise control
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.3 mm
Detailed Description
PowerStop Z47-1540 is a front disc brake pad set engineered for 2014-2025 Ram ProMaster 1500, 2500, and 3500 models, plus 2024-2025 Ram ProMaster EV front brake applications. The semi-metallic compound is infused with carbon fiber to strengthen the friction material and support consistent braking under heavy load. The friction material is mechanically attached to the backing plate for added shear resistance, while the slotted design and scorched surface help prepare the pads for service.
This part number, Z47-1540, is built for fleet operators who need dependable front brake performance on Ram ProMaster vans used in delivery, service, and other high-duty cycles. This part cross-references Chrysler OE numbers 6823 0105AA and 6823 0105AB for the same application.
What It Helps Address
- Brake fade during repeated stops with heavy cargo
- Premature pad wear in daily commercial use
- Inconsistent pedal feel under full GVW operation
- Noise and vibration concerns from worn front pads
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Confirm front axle fitment before installation on Ram ProMaster 1500, ProMaster 2500, ProMaster 3500, or ProMaster EV models. Inspect rotors, calipers, and wear sensors during service, and replace any damaged hardware or worn components as needed. The included stainless-steel hardware and pad shims support a cleaner brake job, and the electronic wear sensor should be connected where equipped.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line as an upgrade over stock braking for medium-duty and last-mile fleet vehicles. Part number Z47-1540 is built with a carbon-fiber reinforced semi-metallic compound, mechanically attached friction material, and included stainless-steel hardware for service-ready front brake replacement.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1540 front brake pads are built for Ram ProMaster and ProMaster EV applications that run at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced pad set is aimed at medium-duty and last-mile fleet service where consistent stopping performance and lower cost-per-mile matter.
The Z47 MD and Fleet line focuses on durability, friction stability, and reduced downtime for demanding commercial braking conditions.
Key Features
- Semi-metallic friction formula with carbon-fiber reinforcement for added compound strength
- Designed for severe-duty fleet braking and daily full-GVW operation
- Mechanically attached friction material for high shear resistance
- Slotted pad design with scorched friction surface
- Pad shims included for improved fit and noise control
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.3 mm
Detailed Description
PowerStop Z47-1540 is a front disc brake pad set engineered for 2014-2025 Ram ProMaster 1500, 2500, and 3500 models, plus 2024-2025 Ram ProMaster EV front brake applications. The semi-metallic compound is infused with carbon fiber to strengthen the friction material and support consistent braking under heavy load. The friction material is mechanically attached to the backing plate for added shear resistance, while the slotted design and scorched surface help prepare the pads for service.
This part number, Z47-1540, is built for fleet operators who need dependable front brake performance on Ram ProMaster vans used in delivery, service, and other high-duty cycles. This part cross-references Chrysler OE numbers 6823 0105AA and 6823 0105AB for the same application.
What It Helps Address
- Brake fade during repeated stops with heavy cargo
- Premature pad wear in daily commercial use
- Inconsistent pedal feel under full GVW operation
- Noise and vibration concerns from worn front pads
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Confirm front axle fitment before installation on Ram ProMaster 1500, ProMaster 2500, ProMaster 3500, or ProMaster EV models. Inspect rotors, calipers, and wear sensors during service, and replace any damaged hardware or worn components as needed. The included stainless-steel hardware and pad shims support a cleaner brake job, and the electronic wear sensor should be connected where equipped.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line as an upgrade over stock braking for medium-duty and last-mile fleet vehicles. Part number Z47-1540 is built with a carbon-fiber reinforced semi-metallic compound, mechanically attached friction material, and included stainless-steel hardware for service-ready front brake replacement.
