PowerStop Z47-1540A Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47 MD and Fleet front brake pads are built for medium-duty and last-mile vehicles that operate at full GVW on a daily basis. This Z47-1540A brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with Ram ProMaster 1500, Ram ProMaster 2500, Ram ProMaster 3500, and Ram ProMaster Rapid front brake applications, this part is a direct-fit option for fleet maintenance and brake service planning. The Z47-1540A part number is also useful when cross-checking replacement brake pad listings for the same application.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet service
- Slotted pad design with scorched friction surface
- Electronic pad wear sensor included
- Pad shims included for added fitment support
- Premium stainless-steel mounting hardware included
- Mechanical friction attachment to the backing plate for shear resistance
- Outer and inner pad thickness: 18.2 mm
Product Details
The Power Stop Z47 MD and Fleet line is focused on vehicles that spend long hours in service and regularly carry heavy loads. For Ram ProMaster 1500, Ram ProMaster 2500, Ram ProMaster 3500, and Ram ProMaster Rapid front brake applications, the Z47-1540A combines a performance-grade semi-metallic compound with carbon-fiber content to help maintain braking consistency under demanding operating conditions. The slotted design and scorched friction surface support pad conditioning, while the mechanically attached friction layer adds durability at the backing plate interface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Helps Address
- Reduced stopping performance on heavily loaded fleet vehicles
- Brake fade during repeated stop-and-go driving
- Premature pad wear in severe-duty service
- Brake noise and uneven pad conditioning during break-in
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Verify front axle fitment by year, model, and brake configuration before installation. Replace pads on both sides of the axle together and inspect rotors, calipers, and wear sensors during service. Clean the caliper bracket and pad contact points thoroughly, then follow the vehicle manufacturer’s brake bedding procedure after installation. The included stainless-steel hardware supports a complete front brake job on the listed Ram ProMaster applications.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for medium-duty and fleet braking demands, with a focus on durability, uptime, and service consistency. The Z47-1540A is built as an upgrade over stock brake pads for vehicles operating at full GVW on a daily basis.
- Fits 2014-2020 Ram ProMaster 1500, front
- Fits 2014-2020 Ram ProMaster 2500, front
- Fits 2014-2020 Ram ProMaster 3500, front
- Fits 2017-2019 Ram ProMaster Rapid, front
Original: $109.25
-65%$109.25
$38.24PowerStop Z47-1540A Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47 MD and Fleet front brake pads are built for medium-duty and last-mile vehicles that operate at full GVW on a daily basis. This Z47-1540A brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with Ram ProMaster 1500, Ram ProMaster 2500, Ram ProMaster 3500, and Ram ProMaster Rapid front brake applications, this part is a direct-fit option for fleet maintenance and brake service planning. The Z47-1540A part number is also useful when cross-checking replacement brake pad listings for the same application.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet service
- Slotted pad design with scorched friction surface
- Electronic pad wear sensor included
- Pad shims included for added fitment support
- Premium stainless-steel mounting hardware included
- Mechanical friction attachment to the backing plate for shear resistance
- Outer and inner pad thickness: 18.2 mm
Product Details
The Power Stop Z47 MD and Fleet line is focused on vehicles that spend long hours in service and regularly carry heavy loads. For Ram ProMaster 1500, Ram ProMaster 2500, Ram ProMaster 3500, and Ram ProMaster Rapid front brake applications, the Z47-1540A combines a performance-grade semi-metallic compound with carbon-fiber content to help maintain braking consistency under demanding operating conditions. The slotted design and scorched friction surface support pad conditioning, while the mechanically attached friction layer adds durability at the backing plate interface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Helps Address
- Reduced stopping performance on heavily loaded fleet vehicles
- Brake fade during repeated stop-and-go driving
- Premature pad wear in severe-duty service
- Brake noise and uneven pad conditioning during break-in
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Verify front axle fitment by year, model, and brake configuration before installation. Replace pads on both sides of the axle together and inspect rotors, calipers, and wear sensors during service. Clean the caliper bracket and pad contact points thoroughly, then follow the vehicle manufacturer’s brake bedding procedure after installation. The included stainless-steel hardware supports a complete front brake job on the listed Ram ProMaster applications.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for medium-duty and fleet braking demands, with a focus on durability, uptime, and service consistency. The Z47-1540A is built as an upgrade over stock brake pads for vehicles operating at full GVW on a daily basis.
- Fits 2014-2020 Ram ProMaster 1500, front
- Fits 2014-2020 Ram ProMaster 2500, front
- Fits 2014-2020 Ram ProMaster 3500, front
- Fits 2017-2019 Ram ProMaster Rapid, front
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47 MD and Fleet front brake pads are built for medium-duty and last-mile vehicles that operate at full GVW on a daily basis. This Z47-1540A brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with Ram ProMaster 1500, Ram ProMaster 2500, Ram ProMaster 3500, and Ram ProMaster Rapid front brake applications, this part is a direct-fit option for fleet maintenance and brake service planning. The Z47-1540A part number is also useful when cross-checking replacement brake pad listings for the same application.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet service
- Slotted pad design with scorched friction surface
- Electronic pad wear sensor included
- Pad shims included for added fitment support
- Premium stainless-steel mounting hardware included
- Mechanical friction attachment to the backing plate for shear resistance
- Outer and inner pad thickness: 18.2 mm
Product Details
The Power Stop Z47 MD and Fleet line is focused on vehicles that spend long hours in service and regularly carry heavy loads. For Ram ProMaster 1500, Ram ProMaster 2500, Ram ProMaster 3500, and Ram ProMaster Rapid front brake applications, the Z47-1540A combines a performance-grade semi-metallic compound with carbon-fiber content to help maintain braking consistency under demanding operating conditions. The slotted design and scorched friction surface support pad conditioning, while the mechanically attached friction layer adds durability at the backing plate interface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Helps Address
- Reduced stopping performance on heavily loaded fleet vehicles
- Brake fade during repeated stop-and-go driving
- Premature pad wear in severe-duty service
- Brake noise and uneven pad conditioning during break-in
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Verify front axle fitment by year, model, and brake configuration before installation. Replace pads on both sides of the axle together and inspect rotors, calipers, and wear sensors during service. Clean the caliper bracket and pad contact points thoroughly, then follow the vehicle manufacturer’s brake bedding procedure after installation. The included stainless-steel hardware supports a complete front brake job on the listed Ram ProMaster applications.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for medium-duty and fleet braking demands, with a focus on durability, uptime, and service consistency. The Z47-1540A is built as an upgrade over stock brake pads for vehicles operating at full GVW on a daily basis.
- Fits 2014-2020 Ram ProMaster 1500, front
- Fits 2014-2020 Ram ProMaster 2500, front
- Fits 2014-2020 Ram ProMaster 3500, front
- Fits 2017-2019 Ram ProMaster Rapid, front
