PowerStop Z47-1565 Disc Brake Pad Set - Front
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-1565 front brake pads are built for medium-duty and last-mile fleet vehicles that run at full GVW on a daily basis. This Z47 MD and Fleet brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance, reduced downtime, and lower cost-per-mile in severe-duty service.
Compatible With front brake applications on Nissan TITAN XD, Nissan NV1500, Nissan NV2500, Nissan NV3500, Chevrolet Silverado 2500 HD, Chevrolet Silverado 3500 HD, Chevrolet Suburban 3500 HD, and GMC Sierra 2500 HD / Sierra 3500 HD. Part number Z47-1565 is engineered for drivers and fleet managers who need dependable front braking under heavy load.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet use
- Mechanical pad wear sensor type
- Slotted, chamfered, and scorched friction surface design
- Pad shims included for improved fit and noise control
- Premium stainless-steel hardware included
- Friction is mechanically attached to the backing plate for high shear resistance
- Outer and inner pad thickness: 19.3 mm
Built for Fleet Braking Demands
The Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are designed as an upgrade over stock brake pads for vehicles that spend long hours in service and frequently carry heavy loads. The semi-metallic compound is reinforced with carbon fiber to help maintain braking performance, while the mechanically attached friction material supports durability in demanding stop-and-go operation. Z47-1565 is a practical choice for Chevrolet Silverado 2500 HD and GMC Sierra 3500 HD front brake service, as well as Nissan TITAN XD and NV-series front brake maintenance.
This part cross-references Nissan OE numbers D1060-1PA0A and D1060-EZ00A for the same application.
Common Problems This Part Helps Address
- Reduced stopping performance under heavy vehicle load
- Brake pad wear from frequent fleet stops and starts
- Noise and vibration from worn front pads
- Extended downtime from repeated brake service intervals
- Inconsistent pedal feel in severe-duty operation
Installation Notes and Tips
Install Z47-1565 on the front axle only for the listed applications. Inspect rotors, calipers, and pad hardware before assembly, and replace any worn components that could affect braking performance. Clean all contact points, apply brake lubricant where appropriate, and verify proper sensor routing and pad seating during installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for medium-duty and fleet braking demands, with a focus on durability, load handling, and service life in daily commercial use. The included stainless-steel hardware and engineered pad construction support a complete front brake service on listed Chevrolet, GMC, and Nissan applications.
Original: $93.59
-65%$93.59
$32.76PowerStop Z47-1565 Disc Brake Pad Set - Front
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-1565 front brake pads are built for medium-duty and last-mile fleet vehicles that run at full GVW on a daily basis. This Z47 MD and Fleet brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance, reduced downtime, and lower cost-per-mile in severe-duty service.
Compatible With front brake applications on Nissan TITAN XD, Nissan NV1500, Nissan NV2500, Nissan NV3500, Chevrolet Silverado 2500 HD, Chevrolet Silverado 3500 HD, Chevrolet Suburban 3500 HD, and GMC Sierra 2500 HD / Sierra 3500 HD. Part number Z47-1565 is engineered for drivers and fleet managers who need dependable front braking under heavy load.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet use
- Mechanical pad wear sensor type
- Slotted, chamfered, and scorched friction surface design
- Pad shims included for improved fit and noise control
- Premium stainless-steel hardware included
- Friction is mechanically attached to the backing plate for high shear resistance
- Outer and inner pad thickness: 19.3 mm
Built for Fleet Braking Demands
The Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are designed as an upgrade over stock brake pads for vehicles that spend long hours in service and frequently carry heavy loads. The semi-metallic compound is reinforced with carbon fiber to help maintain braking performance, while the mechanically attached friction material supports durability in demanding stop-and-go operation. Z47-1565 is a practical choice for Chevrolet Silverado 2500 HD and GMC Sierra 3500 HD front brake service, as well as Nissan TITAN XD and NV-series front brake maintenance.
This part cross-references Nissan OE numbers D1060-1PA0A and D1060-EZ00A for the same application.
Common Problems This Part Helps Address
- Reduced stopping performance under heavy vehicle load
- Brake pad wear from frequent fleet stops and starts
- Noise and vibration from worn front pads
- Extended downtime from repeated brake service intervals
- Inconsistent pedal feel in severe-duty operation
Installation Notes and Tips
Install Z47-1565 on the front axle only for the listed applications. Inspect rotors, calipers, and pad hardware before assembly, and replace any worn components that could affect braking performance. Clean all contact points, apply brake lubricant where appropriate, and verify proper sensor routing and pad seating during installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for medium-duty and fleet braking demands, with a focus on durability, load handling, and service life in daily commercial use. The included stainless-steel hardware and engineered pad construction support a complete front brake service on listed Chevrolet, GMC, and Nissan applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-1565 front brake pads are built for medium-duty and last-mile fleet vehicles that run at full GVW on a daily basis. This Z47 MD and Fleet brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance, reduced downtime, and lower cost-per-mile in severe-duty service.
Compatible With front brake applications on Nissan TITAN XD, Nissan NV1500, Nissan NV2500, Nissan NV3500, Chevrolet Silverado 2500 HD, Chevrolet Silverado 3500 HD, Chevrolet Suburban 3500 HD, and GMC Sierra 2500 HD / Sierra 3500 HD. Part number Z47-1565 is engineered for drivers and fleet managers who need dependable front braking under heavy load.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet use
- Mechanical pad wear sensor type
- Slotted, chamfered, and scorched friction surface design
- Pad shims included for improved fit and noise control
- Premium stainless-steel hardware included
- Friction is mechanically attached to the backing plate for high shear resistance
- Outer and inner pad thickness: 19.3 mm
Built for Fleet Braking Demands
The Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are designed as an upgrade over stock brake pads for vehicles that spend long hours in service and frequently carry heavy loads. The semi-metallic compound is reinforced with carbon fiber to help maintain braking performance, while the mechanically attached friction material supports durability in demanding stop-and-go operation. Z47-1565 is a practical choice for Chevrolet Silverado 2500 HD and GMC Sierra 3500 HD front brake service, as well as Nissan TITAN XD and NV-series front brake maintenance.
This part cross-references Nissan OE numbers D1060-1PA0A and D1060-EZ00A for the same application.
Common Problems This Part Helps Address
- Reduced stopping performance under heavy vehicle load
- Brake pad wear from frequent fleet stops and starts
- Noise and vibration from worn front pads
- Extended downtime from repeated brake service intervals
- Inconsistent pedal feel in severe-duty operation
Installation Notes and Tips
Install Z47-1565 on the front axle only for the listed applications. Inspect rotors, calipers, and pad hardware before assembly, and replace any worn components that could affect braking performance. Clean all contact points, apply brake lubricant where appropriate, and verify proper sensor routing and pad seating during installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for medium-duty and fleet braking demands, with a focus on durability, load handling, and service life in daily commercial use. The included stainless-steel hardware and engineered pad construction support a complete front brake service on listed Chevrolet, GMC, and Nissan applications.
