PowerStop Z47-1680 Disc Brake Pad Set - Front
Front Brake Pads for Super Duty Fleet Use
PowerStop Z47-1680 front brake pads are built for medium-duty and last-mile vehicles that run at or near full GVW every day. This semi-metallic, carbon-fiber reinforced pad set is made for consistent stopping performance, reduced downtime, and lower cost per mile on demanding brake applications.
Compatible with 2012-2022 Ford F-250 Super Duty and 2012-2022 Ford F-350 Super Duty front brake applications, the Z47 MD and Fleet line focuses on severe-duty service where heat, load, and frequent stops are part of the job.
Key Features
- Semi-metallic friction formula with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet service
- Slotted design for improved pad performance
- Chamfered edges for smoother brake engagement
- Scorched friction surface for quicker break-in
- Pad shims included for added noise control
- Premium stainless-steel hardware included
- Mechanical friction attachment for strong shear resistance
- Performance-grade construction for daily heavy-load use
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and regularly carry heavy loads. The carbon-fiber infused semi-metallic compound is built to strengthen the pad material, support uptime, and help control operating costs in fleet environments. PowerStop Z47-1680 is part of that front-brake lineup for Ford Super Duty trucks used in demanding commercial duty cycles.
Detailed Description
PowerStop Z47-1680 front brake pads are a direct-fit disc brake pad set for Ford F-250 Super Duty and Ford F-350 Super Duty models from 2012 through 2022. The pad material uses a semi-metallic formula with carbon-fiber content to handle repeated stops under load, while the mechanically attached friction layer adds shear resistance for severe-duty use. With slotted faces, chamfered edges, scorched surfaces, and included shims, this pad set is built for controlled braking performance in fleet service.
This part cross-references Ford OE numbers DC3Z 2001-A and DC3Z 2001-E for the same application. PowerStop Z47-1680 is a practical choice for front brake service on Ford F-250 Super Duty and Ford F-350 Super Duty trucks that need durable stopping power in daily commercial operation.
What It Helps Address
- Brake fade during repeated stops with heavy payloads
- Premature pad wear in high-mileage fleet use
- Noise and vibration from worn front brake pads
- Reduced braking consistency under full GVW operation
- Extended downtime from frequent brake service intervals
Installation Notes and Tips
Install on the front axle only for the listed Ford Super Duty applications. Inspect rotors, calipers, and slide hardware before installation, and clean all mating surfaces thoroughly. Follow the vehicle service procedure for pad bedding after installation to help establish even transfer material and stable braking performance.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet braking demands, using a carbon-fiber reinforced semi-metallic compound, mechanical friction attachment, and stainless-steel hardware to support reliable service in heavy-use applications.
Original: $96.93
-65%$96.93
$33.93PowerStop Z47-1680 Disc Brake Pad Set - Front
Front Brake Pads for Super Duty Fleet Use
PowerStop Z47-1680 front brake pads are built for medium-duty and last-mile vehicles that run at or near full GVW every day. This semi-metallic, carbon-fiber reinforced pad set is made for consistent stopping performance, reduced downtime, and lower cost per mile on demanding brake applications.
Compatible with 2012-2022 Ford F-250 Super Duty and 2012-2022 Ford F-350 Super Duty front brake applications, the Z47 MD and Fleet line focuses on severe-duty service where heat, load, and frequent stops are part of the job.
Key Features
- Semi-metallic friction formula with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet service
- Slotted design for improved pad performance
- Chamfered edges for smoother brake engagement
- Scorched friction surface for quicker break-in
- Pad shims included for added noise control
- Premium stainless-steel hardware included
- Mechanical friction attachment for strong shear resistance
- Performance-grade construction for daily heavy-load use
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and regularly carry heavy loads. The carbon-fiber infused semi-metallic compound is built to strengthen the pad material, support uptime, and help control operating costs in fleet environments. PowerStop Z47-1680 is part of that front-brake lineup for Ford Super Duty trucks used in demanding commercial duty cycles.
Detailed Description
PowerStop Z47-1680 front brake pads are a direct-fit disc brake pad set for Ford F-250 Super Duty and Ford F-350 Super Duty models from 2012 through 2022. The pad material uses a semi-metallic formula with carbon-fiber content to handle repeated stops under load, while the mechanically attached friction layer adds shear resistance for severe-duty use. With slotted faces, chamfered edges, scorched surfaces, and included shims, this pad set is built for controlled braking performance in fleet service.
This part cross-references Ford OE numbers DC3Z 2001-A and DC3Z 2001-E for the same application. PowerStop Z47-1680 is a practical choice for front brake service on Ford F-250 Super Duty and Ford F-350 Super Duty trucks that need durable stopping power in daily commercial operation.
What It Helps Address
- Brake fade during repeated stops with heavy payloads
- Premature pad wear in high-mileage fleet use
- Noise and vibration from worn front brake pads
- Reduced braking consistency under full GVW operation
- Extended downtime from frequent brake service intervals
Installation Notes and Tips
Install on the front axle only for the listed Ford Super Duty applications. Inspect rotors, calipers, and slide hardware before installation, and clean all mating surfaces thoroughly. Follow the vehicle service procedure for pad bedding after installation to help establish even transfer material and stable braking performance.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet braking demands, using a carbon-fiber reinforced semi-metallic compound, mechanical friction attachment, and stainless-steel hardware to support reliable service in heavy-use applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Super Duty Fleet Use
PowerStop Z47-1680 front brake pads are built for medium-duty and last-mile vehicles that run at or near full GVW every day. This semi-metallic, carbon-fiber reinforced pad set is made for consistent stopping performance, reduced downtime, and lower cost per mile on demanding brake applications.
Compatible with 2012-2022 Ford F-250 Super Duty and 2012-2022 Ford F-350 Super Duty front brake applications, the Z47 MD and Fleet line focuses on severe-duty service where heat, load, and frequent stops are part of the job.
Key Features
- Semi-metallic friction formula with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet service
- Slotted design for improved pad performance
- Chamfered edges for smoother brake engagement
- Scorched friction surface for quicker break-in
- Pad shims included for added noise control
- Premium stainless-steel hardware included
- Mechanical friction attachment for strong shear resistance
- Performance-grade construction for daily heavy-load use
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and regularly carry heavy loads. The carbon-fiber infused semi-metallic compound is built to strengthen the pad material, support uptime, and help control operating costs in fleet environments. PowerStop Z47-1680 is part of that front-brake lineup for Ford Super Duty trucks used in demanding commercial duty cycles.
Detailed Description
PowerStop Z47-1680 front brake pads are a direct-fit disc brake pad set for Ford F-250 Super Duty and Ford F-350 Super Duty models from 2012 through 2022. The pad material uses a semi-metallic formula with carbon-fiber content to handle repeated stops under load, while the mechanically attached friction layer adds shear resistance for severe-duty use. With slotted faces, chamfered edges, scorched surfaces, and included shims, this pad set is built for controlled braking performance in fleet service.
This part cross-references Ford OE numbers DC3Z 2001-A and DC3Z 2001-E for the same application. PowerStop Z47-1680 is a practical choice for front brake service on Ford F-250 Super Duty and Ford F-350 Super Duty trucks that need durable stopping power in daily commercial operation.
What It Helps Address
- Brake fade during repeated stops with heavy payloads
- Premature pad wear in high-mileage fleet use
- Noise and vibration from worn front brake pads
- Reduced braking consistency under full GVW operation
- Extended downtime from frequent brake service intervals
Installation Notes and Tips
Install on the front axle only for the listed Ford Super Duty applications. Inspect rotors, calipers, and slide hardware before installation, and clean all mating surfaces thoroughly. Follow the vehicle service procedure for pad bedding after installation to help establish even transfer material and stable braking performance.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet braking demands, using a carbon-fiber reinforced semi-metallic compound, mechanical friction attachment, and stainless-steel hardware to support reliable service in heavy-use applications.
