PowerStop Z47-1746 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1746 rear disc brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This rear pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with select Ram ProMaster 1500, ProMaster 2500, and ProMaster 3500 rear brake applications, the Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are engineered for severe-duty use. The Z47-1746 part number is a direct fit solution for fleet maintenance programs that need dependable rear braking performance.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for medium-duty and fleet service
- Mechanical pad wear sensor included
- Pad shims included for added fitment support
- Chamfered edges and scorched friction surface
- Friction mechanically attached to the backing plate for high shear resistance
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 20.0 mm
Product Details
The PowerStop Z47-1746 is part of the Z47 MD and Fleet line, a product range focused on vehicles that spend long hours in service and regularly carry heavy loads. This rear brake pad set uses a semi-metallic compound infused with carbon fiber to improve durability and maintain braking consistency under demanding operating conditions. The friction material is mechanically attached to the backing plate to increase shear resistance, while the chamfered edges, scorched surface, and included shims support stable brake operation.
This part cross-references Monroe Shocks & Struts (e.g., 6823 0095AA, 6823 0095AB) for the same application.
What This Part Helps Address
- Reduced rear braking performance on loaded fleet vehicles
- Brake fade concerns during repeated stop-and-go operation
- Premature pad wear in severe-duty service
- Noise or vibration related to worn rear pads and hardware
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Fits 2014 Ram ProMaster 1500, rear. Fits 2015 Ram ProMaster 1500, rear, with vented rear rotors and manufacturer date up to 5/14/15. Fits 2014-2015 Ram ProMaster 2500, rear. Fits 2014-2015 Ram ProMaster 3500, rear.
Before installation, inspect the rear rotors, caliper hardware, and guide components for wear or damage. Clean the caliper bracket contact points, verify pad movement in the bracket, and confirm the wear sensor routing matches the original setup. Follow the vehicle service procedure for bedding-in new brake pads after installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty braking demands in medium-duty and last-mile fleet use. The included stainless-steel hardware, pad shims, and wear sensor support a complete rear brake service on the listed Ram ProMaster applications.
Original: $79.13
-65%$79.13
$27.70PowerStop Z47-1746 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1746 rear disc brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This rear pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with select Ram ProMaster 1500, ProMaster 2500, and ProMaster 3500 rear brake applications, the Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are engineered for severe-duty use. The Z47-1746 part number is a direct fit solution for fleet maintenance programs that need dependable rear braking performance.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for medium-duty and fleet service
- Mechanical pad wear sensor included
- Pad shims included for added fitment support
- Chamfered edges and scorched friction surface
- Friction mechanically attached to the backing plate for high shear resistance
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 20.0 mm
Product Details
The PowerStop Z47-1746 is part of the Z47 MD and Fleet line, a product range focused on vehicles that spend long hours in service and regularly carry heavy loads. This rear brake pad set uses a semi-metallic compound infused with carbon fiber to improve durability and maintain braking consistency under demanding operating conditions. The friction material is mechanically attached to the backing plate to increase shear resistance, while the chamfered edges, scorched surface, and included shims support stable brake operation.
This part cross-references Monroe Shocks & Struts (e.g., 6823 0095AA, 6823 0095AB) for the same application.
What This Part Helps Address
- Reduced rear braking performance on loaded fleet vehicles
- Brake fade concerns during repeated stop-and-go operation
- Premature pad wear in severe-duty service
- Noise or vibration related to worn rear pads and hardware
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Fits 2014 Ram ProMaster 1500, rear. Fits 2015 Ram ProMaster 1500, rear, with vented rear rotors and manufacturer date up to 5/14/15. Fits 2014-2015 Ram ProMaster 2500, rear. Fits 2014-2015 Ram ProMaster 3500, rear.
Before installation, inspect the rear rotors, caliper hardware, and guide components for wear or damage. Clean the caliper bracket contact points, verify pad movement in the bracket, and confirm the wear sensor routing matches the original setup. Follow the vehicle service procedure for bedding-in new brake pads after installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty braking demands in medium-duty and last-mile fleet use. The included stainless-steel hardware, pad shims, and wear sensor support a complete rear brake service on the listed Ram ProMaster applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1746 rear disc brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This rear pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with select Ram ProMaster 1500, ProMaster 2500, and ProMaster 3500 rear brake applications, the Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are engineered for severe-duty use. The Z47-1746 part number is a direct fit solution for fleet maintenance programs that need dependable rear braking performance.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for medium-duty and fleet service
- Mechanical pad wear sensor included
- Pad shims included for added fitment support
- Chamfered edges and scorched friction surface
- Friction mechanically attached to the backing plate for high shear resistance
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 20.0 mm
Product Details
The PowerStop Z47-1746 is part of the Z47 MD and Fleet line, a product range focused on vehicles that spend long hours in service and regularly carry heavy loads. This rear brake pad set uses a semi-metallic compound infused with carbon fiber to improve durability and maintain braking consistency under demanding operating conditions. The friction material is mechanically attached to the backing plate to increase shear resistance, while the chamfered edges, scorched surface, and included shims support stable brake operation.
This part cross-references Monroe Shocks & Struts (e.g., 6823 0095AA, 6823 0095AB) for the same application.
What This Part Helps Address
- Reduced rear braking performance on loaded fleet vehicles
- Brake fade concerns during repeated stop-and-go operation
- Premature pad wear in severe-duty service
- Noise or vibration related to worn rear pads and hardware
- Downtime caused by frequent brake service intervals
Installation Notes and Tips
Fits 2014 Ram ProMaster 1500, rear. Fits 2015 Ram ProMaster 1500, rear, with vented rear rotors and manufacturer date up to 5/14/15. Fits 2014-2015 Ram ProMaster 2500, rear. Fits 2014-2015 Ram ProMaster 3500, rear.
Before installation, inspect the rear rotors, caliper hardware, and guide components for wear or damage. Clean the caliper bracket contact points, verify pad movement in the bracket, and confirm the wear sensor routing matches the original setup. Follow the vehicle service procedure for bedding-in new brake pads after installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty braking demands in medium-duty and last-mile fleet use. The included stainless-steel hardware, pad shims, and wear sensor support a complete rear brake service on the listed Ram ProMaster applications.
