PowerStop Z47-1840 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1840 rear brake pads are built for medium-duty and last-mile fleet vehicles that run at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent braking performance, reduced downtime, and lower cost per mile.
Compatible with Ram ProMaster 1500, Ram ProMaster 2500, and Ram ProMaster 3500 rear applications, the Z47-1840 is a direct-fit brake pad upgrade for demanding commercial service. The pad design includes chamfered edges, scorched friction surfaces, pad shims, and an electronic pad wear sensor for a more complete service replacement.
Power Stop Z47 MD and Fleet Line
The Power Stop Z47 MD and Fleet line is focused on severe-duty braking needs for work vehicles that see frequent stops, heavy loads, and repeated use. The Z47-1840 follows that approach with a mechanically attached friction material for added shear resistance and stainless-steel hardware for a cleaner brake service on supported Ram ProMaster rear brake applications.
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for commercial and fleet service
- Chamfered edges and scorched friction surface
- Pad shims included for noise control support
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.9 mm
Detailed Product Overview
PowerStop Z47-1840 is engineered for rear brake service on Ram ProMaster vans used in daily fleet duty. The semi-metallic compound is formulated with carbon fiber to strengthen the pad material and support stable braking under repeated load cycles. For buyers searching for rear brake pads for 2016-2021 Ram ProMaster 1500, 2500, or 3500, this part number provides a direct replacement option with fitment-specific coverage.
This part cross-references Chrysler 6828 and 9463AA for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated stop-and-go fleet driving
- Premature pad wear from heavy daily payload use
- Noise and vibration from worn rear brake pads
- Reduced braking consistency on commercial vans
- Service delays caused by missing wear sensor or hardware components
Installation Notes and Tips
Verify rear fitment by year, model, and rotor configuration before installation. This part fits 2016-2021 Ram ProMaster 1500, rear; 2016-2021 Ram ProMaster 2500, rear; 2016-2021 Ram ProMaster 3500, rear; and 2015 Ram ProMaster 1500, rear with vented rear rotors and manufacturer build date from 5/15/15. Inspect rotors, calipers, and guide hardware during brake service, and clean the mounting surfaces before installing the new pads.
For Ram ProMaster rear brake pad replacement, follow the vehicle service procedure for bedding-in new pads after installation. Confirm the electronic wear sensor connection and ensure the pad shims and hardware are seated correctly.
Quality Assurance
PowerStop positions the Z47 MD and Fleet line for severe-duty commercial braking, with a carbon-fiber semi-metallic compound and mechanically attached friction material to support durability in fleet use. The included stainless-steel hardware and wear sensor support a complete rear brake service on the listed Ram ProMaster applications.
Original: $97.22
-65%$97.22
$34.03PowerStop Z47-1840 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1840 rear brake pads are built for medium-duty and last-mile fleet vehicles that run at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent braking performance, reduced downtime, and lower cost per mile.
Compatible with Ram ProMaster 1500, Ram ProMaster 2500, and Ram ProMaster 3500 rear applications, the Z47-1840 is a direct-fit brake pad upgrade for demanding commercial service. The pad design includes chamfered edges, scorched friction surfaces, pad shims, and an electronic pad wear sensor for a more complete service replacement.
Power Stop Z47 MD and Fleet Line
The Power Stop Z47 MD and Fleet line is focused on severe-duty braking needs for work vehicles that see frequent stops, heavy loads, and repeated use. The Z47-1840 follows that approach with a mechanically attached friction material for added shear resistance and stainless-steel hardware for a cleaner brake service on supported Ram ProMaster rear brake applications.
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for commercial and fleet service
- Chamfered edges and scorched friction surface
- Pad shims included for noise control support
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.9 mm
Detailed Product Overview
PowerStop Z47-1840 is engineered for rear brake service on Ram ProMaster vans used in daily fleet duty. The semi-metallic compound is formulated with carbon fiber to strengthen the pad material and support stable braking under repeated load cycles. For buyers searching for rear brake pads for 2016-2021 Ram ProMaster 1500, 2500, or 3500, this part number provides a direct replacement option with fitment-specific coverage.
This part cross-references Chrysler 6828 and 9463AA for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated stop-and-go fleet driving
- Premature pad wear from heavy daily payload use
- Noise and vibration from worn rear brake pads
- Reduced braking consistency on commercial vans
- Service delays caused by missing wear sensor or hardware components
Installation Notes and Tips
Verify rear fitment by year, model, and rotor configuration before installation. This part fits 2016-2021 Ram ProMaster 1500, rear; 2016-2021 Ram ProMaster 2500, rear; 2016-2021 Ram ProMaster 3500, rear; and 2015 Ram ProMaster 1500, rear with vented rear rotors and manufacturer build date from 5/15/15. Inspect rotors, calipers, and guide hardware during brake service, and clean the mounting surfaces before installing the new pads.
For Ram ProMaster rear brake pad replacement, follow the vehicle service procedure for bedding-in new pads after installation. Confirm the electronic wear sensor connection and ensure the pad shims and hardware are seated correctly.
Quality Assurance
PowerStop positions the Z47 MD and Fleet line for severe-duty commercial braking, with a carbon-fiber semi-metallic compound and mechanically attached friction material to support durability in fleet use. The included stainless-steel hardware and wear sensor support a complete rear brake service on the listed Ram ProMaster applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-1840 rear brake pads are built for medium-duty and last-mile fleet vehicles that run at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent braking performance, reduced downtime, and lower cost per mile.
Compatible with Ram ProMaster 1500, Ram ProMaster 2500, and Ram ProMaster 3500 rear applications, the Z47-1840 is a direct-fit brake pad upgrade for demanding commercial service. The pad design includes chamfered edges, scorched friction surfaces, pad shims, and an electronic pad wear sensor for a more complete service replacement.
Power Stop Z47 MD and Fleet Line
The Power Stop Z47 MD and Fleet line is focused on severe-duty braking needs for work vehicles that see frequent stops, heavy loads, and repeated use. The Z47-1840 follows that approach with a mechanically attached friction material for added shear resistance and stainless-steel hardware for a cleaner brake service on supported Ram ProMaster rear brake applications.
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for commercial and fleet service
- Chamfered edges and scorched friction surface
- Pad shims included for noise control support
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.9 mm
Detailed Product Overview
PowerStop Z47-1840 is engineered for rear brake service on Ram ProMaster vans used in daily fleet duty. The semi-metallic compound is formulated with carbon fiber to strengthen the pad material and support stable braking under repeated load cycles. For buyers searching for rear brake pads for 2016-2021 Ram ProMaster 1500, 2500, or 3500, this part number provides a direct replacement option with fitment-specific coverage.
This part cross-references Chrysler 6828 and 9463AA for the same application.
What This Brake Pad Set Helps Address
- Brake fade during repeated stop-and-go fleet driving
- Premature pad wear from heavy daily payload use
- Noise and vibration from worn rear brake pads
- Reduced braking consistency on commercial vans
- Service delays caused by missing wear sensor or hardware components
Installation Notes and Tips
Verify rear fitment by year, model, and rotor configuration before installation. This part fits 2016-2021 Ram ProMaster 1500, rear; 2016-2021 Ram ProMaster 2500, rear; 2016-2021 Ram ProMaster 3500, rear; and 2015 Ram ProMaster 1500, rear with vented rear rotors and manufacturer build date from 5/15/15. Inspect rotors, calipers, and guide hardware during brake service, and clean the mounting surfaces before installing the new pads.
For Ram ProMaster rear brake pad replacement, follow the vehicle service procedure for bedding-in new pads after installation. Confirm the electronic wear sensor connection and ensure the pad shims and hardware are seated correctly.
Quality Assurance
PowerStop positions the Z47 MD and Fleet line for severe-duty commercial braking, with a carbon-fiber semi-metallic compound and mechanically attached friction material to support durability in fleet use. The included stainless-steel hardware and wear sensor support a complete rear brake service on the listed Ram ProMaster applications.
