PowerStop Z47-2201 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2201 rear brake pads are built for medium-duty and last-mile vehicles that operate at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500, Sprinter 3500XD, and 2024 eSprinter rear applications, the Power Stop Z47 MD and Fleet line is focused on durability, uptime, and repeatable brake response. Part number Z47-2201 is a direct fit solution for fleet maintenance planning and brake service on Mercedes-Benz Sprinter rear axles.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet service
- Mechanical friction attachment for high shear resistance
- Chamfered edges and scorched friction surface
- Pad shims included for improved fit and noise control
- Premium stainless-steel hardware included
- Performance-grade construction for daily commercial use
- Outer and inner pad thickness: 19.4 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and carry heavy loads. This formulation is aimed at reducing brake wear and maintaining dependable pedal feel under repeated stop-and-go operation, making it a practical choice for Mercedes-Benz Sprinter rear brake service. If you are searching for PowerStop Z47-2201 rear brake pads for Mercedes-Benz Sprinter 2500 or Sprinter 3500 fleet maintenance, this part matches that application.
What It Helps Address
- Brake fade during frequent commercial stops
- Reduced stopping consistency under full GVW operation
- Premature pad wear in high-mileage fleet use
- Noise and vibration concerns during brake service
- Downtime caused by repeated rear brake replacement
Installation Notes and Tips
Inspect the rear rotors, caliper hardware, and guide components before installation. Clean the caliper bracket surfaces thoroughly and follow the vehicle service procedure for pad replacement and bedding. Because mounting hardware and pad shims are included, this rear brake pad set supports a more complete brake service on Mercedes-Benz Sprinter rear applications. Verify fitment by year, model, and rear position before ordering Z47-2201.
Fits 2024 Mercedes-Benz eSprinter, rear. Fits 2019-2024 Mercedes-Benz Sprinter 2500, rear. Fits 2019-2024 Mercedes-Benz Sprinter 3500, rear. Fits 2019-2024 Mercedes-Benz Sprinter 3500XD, rear. Fits 2019-2023 Mercedes-Benz Sprinter 1500, rear. This part cross-references Mercedes-Benz OE numbers 910 420 37 00 and 910 423 56 00 for the same application.
Quality Assurance
PowerStop designs the Z47 MD and Fleet brake pad line for commercial-duty braking demands, using a mechanically attached friction layer and stainless-steel hardware to support secure fitment and service durability. Part number Z47-2201 is built for rear brake service on confirmed Mercedes-Benz Sprinter applications.
Original: $71.98
-65%$71.98
$25.19PowerStop Z47-2201 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2201 rear brake pads are built for medium-duty and last-mile vehicles that operate at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500, Sprinter 3500XD, and 2024 eSprinter rear applications, the Power Stop Z47 MD and Fleet line is focused on durability, uptime, and repeatable brake response. Part number Z47-2201 is a direct fit solution for fleet maintenance planning and brake service on Mercedes-Benz Sprinter rear axles.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet service
- Mechanical friction attachment for high shear resistance
- Chamfered edges and scorched friction surface
- Pad shims included for improved fit and noise control
- Premium stainless-steel hardware included
- Performance-grade construction for daily commercial use
- Outer and inner pad thickness: 19.4 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and carry heavy loads. This formulation is aimed at reducing brake wear and maintaining dependable pedal feel under repeated stop-and-go operation, making it a practical choice for Mercedes-Benz Sprinter rear brake service. If you are searching for PowerStop Z47-2201 rear brake pads for Mercedes-Benz Sprinter 2500 or Sprinter 3500 fleet maintenance, this part matches that application.
What It Helps Address
- Brake fade during frequent commercial stops
- Reduced stopping consistency under full GVW operation
- Premature pad wear in high-mileage fleet use
- Noise and vibration concerns during brake service
- Downtime caused by repeated rear brake replacement
Installation Notes and Tips
Inspect the rear rotors, caliper hardware, and guide components before installation. Clean the caliper bracket surfaces thoroughly and follow the vehicle service procedure for pad replacement and bedding. Because mounting hardware and pad shims are included, this rear brake pad set supports a more complete brake service on Mercedes-Benz Sprinter rear applications. Verify fitment by year, model, and rear position before ordering Z47-2201.
Fits 2024 Mercedes-Benz eSprinter, rear. Fits 2019-2024 Mercedes-Benz Sprinter 2500, rear. Fits 2019-2024 Mercedes-Benz Sprinter 3500, rear. Fits 2019-2024 Mercedes-Benz Sprinter 3500XD, rear. Fits 2019-2023 Mercedes-Benz Sprinter 1500, rear. This part cross-references Mercedes-Benz OE numbers 910 420 37 00 and 910 423 56 00 for the same application.
Quality Assurance
PowerStop designs the Z47 MD and Fleet brake pad line for commercial-duty braking demands, using a mechanically attached friction layer and stainless-steel hardware to support secure fitment and service durability. Part number Z47-2201 is built for rear brake service on confirmed Mercedes-Benz Sprinter applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2201 rear brake pads are built for medium-duty and last-mile vehicles that operate at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500, Sprinter 3500XD, and 2024 eSprinter rear applications, the Power Stop Z47 MD and Fleet line is focused on durability, uptime, and repeatable brake response. Part number Z47-2201 is a direct fit solution for fleet maintenance planning and brake service on Mercedes-Benz Sprinter rear axles.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet service
- Mechanical friction attachment for high shear resistance
- Chamfered edges and scorched friction surface
- Pad shims included for improved fit and noise control
- Premium stainless-steel hardware included
- Performance-grade construction for daily commercial use
- Outer and inner pad thickness: 19.4 mm
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and carry heavy loads. This formulation is aimed at reducing brake wear and maintaining dependable pedal feel under repeated stop-and-go operation, making it a practical choice for Mercedes-Benz Sprinter rear brake service. If you are searching for PowerStop Z47-2201 rear brake pads for Mercedes-Benz Sprinter 2500 or Sprinter 3500 fleet maintenance, this part matches that application.
What It Helps Address
- Brake fade during frequent commercial stops
- Reduced stopping consistency under full GVW operation
- Premature pad wear in high-mileage fleet use
- Noise and vibration concerns during brake service
- Downtime caused by repeated rear brake replacement
Installation Notes and Tips
Inspect the rear rotors, caliper hardware, and guide components before installation. Clean the caliper bracket surfaces thoroughly and follow the vehicle service procedure for pad replacement and bedding. Because mounting hardware and pad shims are included, this rear brake pad set supports a more complete brake service on Mercedes-Benz Sprinter rear applications. Verify fitment by year, model, and rear position before ordering Z47-2201.
Fits 2024 Mercedes-Benz eSprinter, rear. Fits 2019-2024 Mercedes-Benz Sprinter 2500, rear. Fits 2019-2024 Mercedes-Benz Sprinter 3500, rear. Fits 2019-2024 Mercedes-Benz Sprinter 3500XD, rear. Fits 2019-2023 Mercedes-Benz Sprinter 1500, rear. This part cross-references Mercedes-Benz OE numbers 910 420 37 00 and 910 423 56 00 for the same application.
Quality Assurance
PowerStop designs the Z47 MD and Fleet brake pad line for commercial-duty braking demands, using a mechanically attached friction layer and stainless-steel hardware to support secure fitment and service durability. Part number Z47-2201 is built for rear brake service on confirmed Mercedes-Benz Sprinter applications.
