PowerStop Z47-2280 Disc Brake Pad Set - Rear
Rear Brake Pads for Transit Fleet Use
PowerStop Z47-2280 rear brake pads are built for medium-duty and last-mile fleet vehicles that operate at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber reinforced friction formula to support consistent stopping performance and lower cost-per-mile in severe-duty service.
Compatible with Ford Transit-150, Transit-250, Transit-350, Transit-350 HD, and E-Transit rear brake applications, the Power Stop Z47 MD and Fleet line is focused on uptime, durability, and repeatable braking under load. The Z47-2280 also includes stainless-steel hardware for a cleaner brake service and easier reassembly.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for fleet and medium-duty service
- Slotted, chamfered, and scorched friction surfaces
- Pad shims included for added fit and noise control
- Mechanical friction attachment for strong shear resistance
- Premium stainless-steel hardware included
- Performance-grade construction for severe-duty braking demands
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and regularly carry heavy loads. The carbon-fiber infused semi-metallic compound is selected to strengthen the pad material and support extended service life in demanding fleet environments. For Ford Transit-150 rear brake pads, Ford Transit-250 rear brake pads, and Ford Transit-350 rear brake pads, this line is aimed at dependable braking performance without unnecessary complexity.
Part number Z47-2280 is a direct rear brake pad solution for 2020-2026 Ford Transit-150, 2020-2026 Ford Transit-250, 2020-2026 Ford Transit-350, 2026 Ford Transit-350 HD, 2024-2025 Ford Transit-350 HD, 2022-2023 Ford E-Transit, and 2020-2023 Ford Transit-350 HD rear applications with the listed notes. This part cross-references Raybestos Brakes SP2280TRH and Wagner Brake SX2388 for the same application.
What It Helps Address
- Brake fade during repeated stop-and-go fleet driving
- Premature pad wear in heavy-load service
- Reduced braking consistency on vehicles running at full GVW
- Noise and vibration concerns from worn rear pads
- Brake service downtime caused by missing or corroded hardware
Installation Notes
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, then install the included stainless-steel hardware and pad shims as part of the brake service. Confirm the vehicle-specific notes for Transit-350 HD and E-Transit rear applications, including GVW and solid rear rotor requirements where listed. Z47-2280 is a rear-position brake pad set only.
Quality Assurance
PowerStop designs the Z47 MD and Fleet series for severe-duty fleet braking needs, using a mechanically attached friction layer and a performance-oriented semi-metallic compound to support strong shear resistance and dependable service life.
Original: $98.56
-65%$98.56
$34.50PowerStop Z47-2280 Disc Brake Pad Set - Rear
Rear Brake Pads for Transit Fleet Use
PowerStop Z47-2280 rear brake pads are built for medium-duty and last-mile fleet vehicles that operate at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber reinforced friction formula to support consistent stopping performance and lower cost-per-mile in severe-duty service.
Compatible with Ford Transit-150, Transit-250, Transit-350, Transit-350 HD, and E-Transit rear brake applications, the Power Stop Z47 MD and Fleet line is focused on uptime, durability, and repeatable braking under load. The Z47-2280 also includes stainless-steel hardware for a cleaner brake service and easier reassembly.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for fleet and medium-duty service
- Slotted, chamfered, and scorched friction surfaces
- Pad shims included for added fit and noise control
- Mechanical friction attachment for strong shear resistance
- Premium stainless-steel hardware included
- Performance-grade construction for severe-duty braking demands
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and regularly carry heavy loads. The carbon-fiber infused semi-metallic compound is selected to strengthen the pad material and support extended service life in demanding fleet environments. For Ford Transit-150 rear brake pads, Ford Transit-250 rear brake pads, and Ford Transit-350 rear brake pads, this line is aimed at dependable braking performance without unnecessary complexity.
Part number Z47-2280 is a direct rear brake pad solution for 2020-2026 Ford Transit-150, 2020-2026 Ford Transit-250, 2020-2026 Ford Transit-350, 2026 Ford Transit-350 HD, 2024-2025 Ford Transit-350 HD, 2022-2023 Ford E-Transit, and 2020-2023 Ford Transit-350 HD rear applications with the listed notes. This part cross-references Raybestos Brakes SP2280TRH and Wagner Brake SX2388 for the same application.
What It Helps Address
- Brake fade during repeated stop-and-go fleet driving
- Premature pad wear in heavy-load service
- Reduced braking consistency on vehicles running at full GVW
- Noise and vibration concerns from worn rear pads
- Brake service downtime caused by missing or corroded hardware
Installation Notes
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, then install the included stainless-steel hardware and pad shims as part of the brake service. Confirm the vehicle-specific notes for Transit-350 HD and E-Transit rear applications, including GVW and solid rear rotor requirements where listed. Z47-2280 is a rear-position brake pad set only.
Quality Assurance
PowerStop designs the Z47 MD and Fleet series for severe-duty fleet braking needs, using a mechanically attached friction layer and a performance-oriented semi-metallic compound to support strong shear resistance and dependable service life.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Transit Fleet Use
PowerStop Z47-2280 rear brake pads are built for medium-duty and last-mile fleet vehicles that operate at or near full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber reinforced friction formula to support consistent stopping performance and lower cost-per-mile in severe-duty service.
Compatible with Ford Transit-150, Transit-250, Transit-350, Transit-350 HD, and E-Transit rear brake applications, the Power Stop Z47 MD and Fleet line is focused on uptime, durability, and repeatable braking under load. The Z47-2280 also includes stainless-steel hardware for a cleaner brake service and easier reassembly.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for fleet and medium-duty service
- Slotted, chamfered, and scorched friction surfaces
- Pad shims included for added fit and noise control
- Mechanical friction attachment for strong shear resistance
- Premium stainless-steel hardware included
- Performance-grade construction for severe-duty braking demands
Product Line Details
The Power Stop Z47 MD and Fleet line is engineered for vehicles that spend long hours in service and regularly carry heavy loads. The carbon-fiber infused semi-metallic compound is selected to strengthen the pad material and support extended service life in demanding fleet environments. For Ford Transit-150 rear brake pads, Ford Transit-250 rear brake pads, and Ford Transit-350 rear brake pads, this line is aimed at dependable braking performance without unnecessary complexity.
Part number Z47-2280 is a direct rear brake pad solution for 2020-2026 Ford Transit-150, 2020-2026 Ford Transit-250, 2020-2026 Ford Transit-350, 2026 Ford Transit-350 HD, 2024-2025 Ford Transit-350 HD, 2022-2023 Ford E-Transit, and 2020-2023 Ford Transit-350 HD rear applications with the listed notes. This part cross-references Raybestos Brakes SP2280TRH and Wagner Brake SX2388 for the same application.
What It Helps Address
- Brake fade during repeated stop-and-go fleet driving
- Premature pad wear in heavy-load service
- Reduced braking consistency on vehicles running at full GVW
- Noise and vibration concerns from worn rear pads
- Brake service downtime caused by missing or corroded hardware
Installation Notes
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, then install the included stainless-steel hardware and pad shims as part of the brake service. Confirm the vehicle-specific notes for Transit-350 HD and E-Transit rear applications, including GVW and solid rear rotor requirements where listed. Z47-2280 is a rear-position brake pad set only.
Quality Assurance
PowerStop designs the Z47 MD and Fleet series for severe-duty fleet braking needs, using a mechanically attached friction layer and a performance-oriented semi-metallic compound to support strong shear resistance and dependable service life.
