PowerStop Z47-2404 Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2404 front brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit application combines a semi-metallic friction formula with carbon-fiber reinforcement for consistent stopping performance and reduced cost-per-mile.
Compatible With 2021-2024 Chevrolet Express 2500, front; 2021-2024 Chevrolet Express 3500, front; 2021-2024 GMC Savana 2500, front; and 2021-2024 GMC Savana 3500, front. The Z47-2404 is a direct-fit front disc brake pad set for fleet service where uptime and repeatable braking matter.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet braking
- Mechanical pad wear sensor included
- Slotted, chamfered, and friction-surface scorched for consistent bedding
- Pad shims included for noise control support
- Premium stainless-steel mounting hardware included
- Outer and inner pad thickness: 19.0 mm
- Performance-grade construction with mechanically attached friction for high shear resistance
Product Line Details
Power Stop Z47 MD and Fleet pads are part of PowerStop’s medium-duty and fleet-focused brake line. This line is aimed at vehicles that spend long hours in service, carrying heavy loads and making frequent stops, where stable friction and durable pad construction are important.
Detailed Description
PowerStop Z47-2404 front brake pads use a semi-metallic compound infused with carbon fiber to strengthen the friction material and support long service life in demanding fleet conditions. The friction material is mechanically attached to the backing plate for added shear resistance, while the slotted design, chamfered edges, and scorched surface help promote predictable pad behavior during break-in and everyday operation. Stainless-steel hardware is included to simplify the brake job and support a clean front brake pad replacement on Chevrolet Express and GMC Savana vans.
This part cross-references Bendix Fleet Metlok MKD2404FM for the same application.
What This Part Helps Address
- Brake fade during repeated stops with a loaded vehicle
- Premature pad wear in high-mileage fleet service
- Noise and vibration concerns during braking
- Reduced braking consistency under full GVW operation
- Time lost to frequent front brake service intervals
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, then install the included hardware and shims as directed by the service procedure. After installation, perform a proper bedding-in process to help the friction material transfer evenly and stabilize braking performance.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use with performance-focused materials and hardware support. The Z47-2404 front brake pads are built to meet the demands of Chevrolet Express 2500 and 3500 as well as GMC Savana 2500 and 3500 front brake applications from 2021-2024.
Original: $126.64
-65%$126.64
$44.32PowerStop Z47-2404 Disc Brake Pad Set - Front
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2404 front brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit application combines a semi-metallic friction formula with carbon-fiber reinforcement for consistent stopping performance and reduced cost-per-mile.
Compatible With 2021-2024 Chevrolet Express 2500, front; 2021-2024 Chevrolet Express 3500, front; 2021-2024 GMC Savana 2500, front; and 2021-2024 GMC Savana 3500, front. The Z47-2404 is a direct-fit front disc brake pad set for fleet service where uptime and repeatable braking matter.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet braking
- Mechanical pad wear sensor included
- Slotted, chamfered, and friction-surface scorched for consistent bedding
- Pad shims included for noise control support
- Premium stainless-steel mounting hardware included
- Outer and inner pad thickness: 19.0 mm
- Performance-grade construction with mechanically attached friction for high shear resistance
Product Line Details
Power Stop Z47 MD and Fleet pads are part of PowerStop’s medium-duty and fleet-focused brake line. This line is aimed at vehicles that spend long hours in service, carrying heavy loads and making frequent stops, where stable friction and durable pad construction are important.
Detailed Description
PowerStop Z47-2404 front brake pads use a semi-metallic compound infused with carbon fiber to strengthen the friction material and support long service life in demanding fleet conditions. The friction material is mechanically attached to the backing plate for added shear resistance, while the slotted design, chamfered edges, and scorched surface help promote predictable pad behavior during break-in and everyday operation. Stainless-steel hardware is included to simplify the brake job and support a clean front brake pad replacement on Chevrolet Express and GMC Savana vans.
This part cross-references Bendix Fleet Metlok MKD2404FM for the same application.
What This Part Helps Address
- Brake fade during repeated stops with a loaded vehicle
- Premature pad wear in high-mileage fleet service
- Noise and vibration concerns during braking
- Reduced braking consistency under full GVW operation
- Time lost to frequent front brake service intervals
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, then install the included hardware and shims as directed by the service procedure. After installation, perform a proper bedding-in process to help the friction material transfer evenly and stabilize braking performance.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use with performance-focused materials and hardware support. The Z47-2404 front brake pads are built to meet the demands of Chevrolet Express 2500 and 3500 as well as GMC Savana 2500 and 3500 front brake applications from 2021-2024.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2404 front brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit application combines a semi-metallic friction formula with carbon-fiber reinforcement for consistent stopping performance and reduced cost-per-mile.
Compatible With 2021-2024 Chevrolet Express 2500, front; 2021-2024 Chevrolet Express 3500, front; 2021-2024 GMC Savana 2500, front; and 2021-2024 GMC Savana 3500, front. The Z47-2404 is a direct-fit front disc brake pad set for fleet service where uptime and repeatable braking matter.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for severe-duty fleet braking
- Mechanical pad wear sensor included
- Slotted, chamfered, and friction-surface scorched for consistent bedding
- Pad shims included for noise control support
- Premium stainless-steel mounting hardware included
- Outer and inner pad thickness: 19.0 mm
- Performance-grade construction with mechanically attached friction for high shear resistance
Product Line Details
Power Stop Z47 MD and Fleet pads are part of PowerStop’s medium-duty and fleet-focused brake line. This line is aimed at vehicles that spend long hours in service, carrying heavy loads and making frequent stops, where stable friction and durable pad construction are important.
Detailed Description
PowerStop Z47-2404 front brake pads use a semi-metallic compound infused with carbon fiber to strengthen the friction material and support long service life in demanding fleet conditions. The friction material is mechanically attached to the backing plate for added shear resistance, while the slotted design, chamfered edges, and scorched surface help promote predictable pad behavior during break-in and everyday operation. Stainless-steel hardware is included to simplify the brake job and support a clean front brake pad replacement on Chevrolet Express and GMC Savana vans.
This part cross-references Bendix Fleet Metlok MKD2404FM for the same application.
What This Part Helps Address
- Brake fade during repeated stops with a loaded vehicle
- Premature pad wear in high-mileage fleet service
- Noise and vibration concerns during braking
- Reduced braking consistency under full GVW operation
- Time lost to frequent front brake service intervals
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, then install the included hardware and shims as directed by the service procedure. After installation, perform a proper bedding-in process to help the friction material transfer evenly and stabilize braking performance.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use with performance-focused materials and hardware support. The Z47-2404 front brake pads are built to meet the demands of Chevrolet Express 2500 and 3500 as well as GMC Savana 2500 and 3500 front brake applications from 2021-2024.
