PowerStop Z47-2406 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2406 rear brake pads are built for medium-duty and last-mile fleet vehicles that run at full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with 2021-2024 Chevrolet Express 2500, rear; 2021-2024 Chevrolet Express 3500, rear; 2021-2024 GMC Savana 2500, rear; and 2021-2024 GMC Savana 3500, rear.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet braking demands
- Mechanical attachment of friction material to the backing plate for added shear resistance
- Slotted pad design and scorched friction surface
- Pad shims included for added fitment support
- Pad wear sensor included with mechanical sensor type
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.0 mm
Product Details
The Power Stop Z47 MD and Fleet line focuses on brake service for vehicles that spend long hours on the road under load. The Z47-2406 rear pads use a performance-grade semi-metallic compound with carbon fiber to strengthen the friction material and help maintain uptime in fleet operation. The friction layer is mechanically attached to the backing plate for improved shear resistance, while the slotted design and scorched surface support stable initial performance after installation. PowerStop Z47-2406 is a direct rear brake pad option for Chevrolet Express and GMC Savana vans used in commercial and fleet applications.
This part cross-references Raybestos Brakes SP2406TRH for the same application.
What It Helps Address
- Brake fade during repeated stops with loaded vehicles
- Premature pad wear in daily fleet service
- Reduced braking consistency under full GVW operation
- Brake noise and uneven pad contact from worn rear pads
- Downtime caused by incomplete brake service parts
Installation Notes and Tips
Inspect rotors, caliper hardware, and guide components before installation. Clean the caliper bracket and pad contact points, then apply brake lubricant where specified by the vehicle service procedure; lubricant is not included. Confirm rear fitment for 2021-2024 Chevrolet Express 2500, Chevrolet Express 3500, GMC Savana 2500, and GMC Savana 3500 before assembly. Follow the vehicle manufacturer’s brake service procedure and bed the pads in according to PowerStop recommendations after installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty commercial braking needs, with carbon-fiber-enhanced semi-metallic friction, mechanical attachment to the backing plate, and included stainless-steel hardware to support a complete brake service.
PowerStop Z47-2406 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2406 rear brake pads are built for medium-duty and last-mile fleet vehicles that run at full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with 2021-2024 Chevrolet Express 2500, rear; 2021-2024 Chevrolet Express 3500, rear; 2021-2024 GMC Savana 2500, rear; and 2021-2024 GMC Savana 3500, rear.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet braking demands
- Mechanical attachment of friction material to the backing plate for added shear resistance
- Slotted pad design and scorched friction surface
- Pad shims included for added fitment support
- Pad wear sensor included with mechanical sensor type
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.0 mm
Product Details
The Power Stop Z47 MD and Fleet line focuses on brake service for vehicles that spend long hours on the road under load. The Z47-2406 rear pads use a performance-grade semi-metallic compound with carbon fiber to strengthen the friction material and help maintain uptime in fleet operation. The friction layer is mechanically attached to the backing plate for improved shear resistance, while the slotted design and scorched surface support stable initial performance after installation. PowerStop Z47-2406 is a direct rear brake pad option for Chevrolet Express and GMC Savana vans used in commercial and fleet applications.
This part cross-references Raybestos Brakes SP2406TRH for the same application.
What It Helps Address
- Brake fade during repeated stops with loaded vehicles
- Premature pad wear in daily fleet service
- Reduced braking consistency under full GVW operation
- Brake noise and uneven pad contact from worn rear pads
- Downtime caused by incomplete brake service parts
Installation Notes and Tips
Inspect rotors, caliper hardware, and guide components before installation. Clean the caliper bracket and pad contact points, then apply brake lubricant where specified by the vehicle service procedure; lubricant is not included. Confirm rear fitment for 2021-2024 Chevrolet Express 2500, Chevrolet Express 3500, GMC Savana 2500, and GMC Savana 3500 before assembly. Follow the vehicle manufacturer’s brake service procedure and bed the pads in according to PowerStop recommendations after installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty commercial braking needs, with carbon-fiber-enhanced semi-metallic friction, mechanical attachment to the backing plate, and included stainless-steel hardware to support a complete brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2406 rear brake pads are built for medium-duty and last-mile fleet vehicles that run at full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support consistent stopping performance and lower cost-per-mile in demanding service.
Compatible with 2021-2024 Chevrolet Express 2500, rear; 2021-2024 Chevrolet Express 3500, rear; 2021-2024 GMC Savana 2500, rear; and 2021-2024 GMC Savana 3500, rear.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet braking demands
- Mechanical attachment of friction material to the backing plate for added shear resistance
- Slotted pad design and scorched friction surface
- Pad shims included for added fitment support
- Pad wear sensor included with mechanical sensor type
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.0 mm
Product Details
The Power Stop Z47 MD and Fleet line focuses on brake service for vehicles that spend long hours on the road under load. The Z47-2406 rear pads use a performance-grade semi-metallic compound with carbon fiber to strengthen the friction material and help maintain uptime in fleet operation. The friction layer is mechanically attached to the backing plate for improved shear resistance, while the slotted design and scorched surface support stable initial performance after installation. PowerStop Z47-2406 is a direct rear brake pad option for Chevrolet Express and GMC Savana vans used in commercial and fleet applications.
This part cross-references Raybestos Brakes SP2406TRH for the same application.
What It Helps Address
- Brake fade during repeated stops with loaded vehicles
- Premature pad wear in daily fleet service
- Reduced braking consistency under full GVW operation
- Brake noise and uneven pad contact from worn rear pads
- Downtime caused by incomplete brake service parts
Installation Notes and Tips
Inspect rotors, caliper hardware, and guide components before installation. Clean the caliper bracket and pad contact points, then apply brake lubricant where specified by the vehicle service procedure; lubricant is not included. Confirm rear fitment for 2021-2024 Chevrolet Express 2500, Chevrolet Express 3500, GMC Savana 2500, and GMC Savana 3500 before assembly. Follow the vehicle manufacturer’s brake service procedure and bed the pads in according to PowerStop recommendations after installation.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty commercial braking needs, with carbon-fiber-enhanced semi-metallic friction, mechanical attachment to the backing plate, and included stainless-steel hardware to support a complete brake service.
