PowerStop Z47-2467 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2467 rear brake pads are built for Ram ProMaster vans that operate at full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support long service life, consistent braking, and lower cost-per-mile in medium-duty and last-mile fleet service.
Fits 2024-2026 Ram ProMaster EV, rear. Fits 2022-2025 Ram ProMaster 1500, rear. Fits 2022-2025 Ram ProMaster 2500, rear. Fits 2022-2025 Ram ProMaster 3500, rear.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet braking demands
- Mechanical friction attachment to the backing plate for shear resistance
- Slotted, chamfered, and scorched friction surfaces
- Pad shims included for improved fit and noise control
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.1 mm
Product Details
The Power Stop Z47 MD and Fleet line is aimed at commercial vehicles that spend long hours in stop-and-go service while carrying heavy loads. On Ram ProMaster EV and gas-powered ProMaster 1500, 2500, and 3500 rear applications, the Z47-2467 pad set focuses on durability, stable friction, and reduced downtime. The carbon-fiber-enhanced semi-metallic compound is paired with mechanically attached friction material and stainless-steel hardware to support dependable rear braking performance in demanding fleet conditions. This part cross-references Monroe Shocks & Struts (e.g., NS2467) and Raybestos Brakes (e.g., SP2467TRH) for the same application.
Common Problems This Part Helps Address
- Reduced rear braking performance under heavy daily loads
- Premature pad wear in stop-and-go fleet operation
- Brake noise caused by worn or uneven rear pads
- Longer service intervals from pads not suited to severe-duty use
- Brake warning issues when the wear sensor is needed
Installation Notes and Tips
Verify rear fitment by year, model, and position before installation. Inspect rotors, caliper hardware, and guide pins for wear or corrosion before fitting new pads. Clean the brake assembly thoroughly, follow proper bedding procedures after installation, and confirm the electronic wear sensor connection is seated correctly on equipped vehicles.
Quality Assurance
PowerStop designs the Z47 MD and Fleet brake pad line for commercial-duty braking performance, with friction material engineered for high-load daily use and stainless-steel hardware included for a complete rear brake service. The pad construction, surface treatment, and wear sensor provision support consistent serviceability in fleet maintenance programs.
PowerStop Z47-2467 Disc Brake Pad Set - Rear
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2467 rear brake pads are built for Ram ProMaster vans that operate at full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support long service life, consistent braking, and lower cost-per-mile in medium-duty and last-mile fleet service.
Fits 2024-2026 Ram ProMaster EV, rear. Fits 2022-2025 Ram ProMaster 1500, rear. Fits 2022-2025 Ram ProMaster 2500, rear. Fits 2022-2025 Ram ProMaster 3500, rear.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet braking demands
- Mechanical friction attachment to the backing plate for shear resistance
- Slotted, chamfered, and scorched friction surfaces
- Pad shims included for improved fit and noise control
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.1 mm
Product Details
The Power Stop Z47 MD and Fleet line is aimed at commercial vehicles that spend long hours in stop-and-go service while carrying heavy loads. On Ram ProMaster EV and gas-powered ProMaster 1500, 2500, and 3500 rear applications, the Z47-2467 pad set focuses on durability, stable friction, and reduced downtime. The carbon-fiber-enhanced semi-metallic compound is paired with mechanically attached friction material and stainless-steel hardware to support dependable rear braking performance in demanding fleet conditions. This part cross-references Monroe Shocks & Struts (e.g., NS2467) and Raybestos Brakes (e.g., SP2467TRH) for the same application.
Common Problems This Part Helps Address
- Reduced rear braking performance under heavy daily loads
- Premature pad wear in stop-and-go fleet operation
- Brake noise caused by worn or uneven rear pads
- Longer service intervals from pads not suited to severe-duty use
- Brake warning issues when the wear sensor is needed
Installation Notes and Tips
Verify rear fitment by year, model, and position before installation. Inspect rotors, caliper hardware, and guide pins for wear or corrosion before fitting new pads. Clean the brake assembly thoroughly, follow proper bedding procedures after installation, and confirm the electronic wear sensor connection is seated correctly on equipped vehicles.
Quality Assurance
PowerStop designs the Z47 MD and Fleet brake pad line for commercial-duty braking performance, with friction material engineered for high-load daily use and stainless-steel hardware included for a complete rear brake service. The pad construction, surface treatment, and wear sensor provision support consistent serviceability in fleet maintenance programs.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Pads for Severe-Duty Fleet Use
PowerStop Z47-2467 rear brake pads are built for Ram ProMaster vans that operate at full GVW on a daily basis. This rear disc brake pad set uses a semi-metallic, carbon-fiber-infused friction formula to support long service life, consistent braking, and lower cost-per-mile in medium-duty and last-mile fleet service.
Fits 2024-2026 Ram ProMaster EV, rear. Fits 2022-2025 Ram ProMaster 1500, rear. Fits 2022-2025 Ram ProMaster 2500, rear. Fits 2022-2025 Ram ProMaster 3500, rear.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Rear disc brake pad set for severe-duty fleet braking demands
- Mechanical friction attachment to the backing plate for shear resistance
- Slotted, chamfered, and scorched friction surfaces
- Pad shims included for improved fit and noise control
- Electronic pad wear sensor included
- Premium stainless-steel hardware included
- Outer and inner pad thickness: 19.1 mm
Product Details
The Power Stop Z47 MD and Fleet line is aimed at commercial vehicles that spend long hours in stop-and-go service while carrying heavy loads. On Ram ProMaster EV and gas-powered ProMaster 1500, 2500, and 3500 rear applications, the Z47-2467 pad set focuses on durability, stable friction, and reduced downtime. The carbon-fiber-enhanced semi-metallic compound is paired with mechanically attached friction material and stainless-steel hardware to support dependable rear braking performance in demanding fleet conditions. This part cross-references Monroe Shocks & Struts (e.g., NS2467) and Raybestos Brakes (e.g., SP2467TRH) for the same application.
Common Problems This Part Helps Address
- Reduced rear braking performance under heavy daily loads
- Premature pad wear in stop-and-go fleet operation
- Brake noise caused by worn or uneven rear pads
- Longer service intervals from pads not suited to severe-duty use
- Brake warning issues when the wear sensor is needed
Installation Notes and Tips
Verify rear fitment by year, model, and position before installation. Inspect rotors, caliper hardware, and guide pins for wear or corrosion before fitting new pads. Clean the brake assembly thoroughly, follow proper bedding procedures after installation, and confirm the electronic wear sensor connection is seated correctly on equipped vehicles.
Quality Assurance
PowerStop designs the Z47 MD and Fleet brake pad line for commercial-duty braking performance, with friction material engineered for high-load daily use and stainless-steel hardware included for a complete rear brake service. The pad construction, surface treatment, and wear sensor provision support consistent serviceability in fleet maintenance programs.
