PowerStop Z47-769 Disc Brake Pad Set - Front or Rear
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47 MD and Fleet brake pads are built for medium-duty and last-mile vehicles that run at or near full GVW on a daily basis. The semi-metallic, carbon-fiber reinforced friction compound is engineered for durable stopping performance, while the friction material is mechanically attached to the backing plate for added shear resistance. Part number Z47-769 is a practical upgrade for fleet brake service where uptime and cost-per-mile matter.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance grade pad set for severe-duty fleet use
- Friction is mechanically attached to the backing plate for high shear resistance
- Scorched friction surface for initial bedding support
- Stainless-steel hardware included for brake service completion
- Pad thickness: 24.6 mm inner and 24.6 mm outer
- Part number Z47-769 for catalog and cross-reference lookup
Product Details
The Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are designed for demanding commercial braking conditions. The semi-metallic compound balances stopping performance and durability, and the carbon-fiber content helps strengthen the pad material for repeated heavy-load operation. This makes Z47-769 a strong choice for fleet maintenance programs that service vehicles operating at full GVW on a regular schedule. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With fleet brake service applications where consistent pedal feel, reduced downtime, and dependable wear characteristics are priorities. Search terms such as medium duty brake pads, last mile fleet brake pads, and PowerStop Z47-769 brake pad set are commonly used by buyers looking for this type of replacement.
What It Helps Address
- Brake fade during repeated heavy-duty stops
- Premature pad wear in full-GVW fleet operation
- Shear-related friction separation concerns
- Extended service intervals caused by lower-durability pad compounds
- Brake job delays from missing service hardware
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and hub contact surfaces, then follow the vehicle manufacturer’s bedding procedure after installation. The pads are not slotted, do not include shims, and do not include a pad wear sensor or brake lubricant. Confirm the application by matching part number Z47-769 to the vehicle’s brake configuration before service.
Quality Assurance
PowerStop positions the Z47 MD and Fleet line for severe-duty commercial use, with a carbon-fiber reinforced semi-metallic formula and mechanically attached friction material for added durability. Premium stainless-steel hardware is included, and the pad surfaces are scorched to support initial break-in.
PowerStop Z47-769 Disc Brake Pad Set - Front or Rear
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47 MD and Fleet brake pads are built for medium-duty and last-mile vehicles that run at or near full GVW on a daily basis. The semi-metallic, carbon-fiber reinforced friction compound is engineered for durable stopping performance, while the friction material is mechanically attached to the backing plate for added shear resistance. Part number Z47-769 is a practical upgrade for fleet brake service where uptime and cost-per-mile matter.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance grade pad set for severe-duty fleet use
- Friction is mechanically attached to the backing plate for high shear resistance
- Scorched friction surface for initial bedding support
- Stainless-steel hardware included for brake service completion
- Pad thickness: 24.6 mm inner and 24.6 mm outer
- Part number Z47-769 for catalog and cross-reference lookup
Product Details
The Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are designed for demanding commercial braking conditions. The semi-metallic compound balances stopping performance and durability, and the carbon-fiber content helps strengthen the pad material for repeated heavy-load operation. This makes Z47-769 a strong choice for fleet maintenance programs that service vehicles operating at full GVW on a regular schedule. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With fleet brake service applications where consistent pedal feel, reduced downtime, and dependable wear characteristics are priorities. Search terms such as medium duty brake pads, last mile fleet brake pads, and PowerStop Z47-769 brake pad set are commonly used by buyers looking for this type of replacement.
What It Helps Address
- Brake fade during repeated heavy-duty stops
- Premature pad wear in full-GVW fleet operation
- Shear-related friction separation concerns
- Extended service intervals caused by lower-durability pad compounds
- Brake job delays from missing service hardware
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and hub contact surfaces, then follow the vehicle manufacturer’s bedding procedure after installation. The pads are not slotted, do not include shims, and do not include a pad wear sensor or brake lubricant. Confirm the application by matching part number Z47-769 to the vehicle’s brake configuration before service.
Quality Assurance
PowerStop positions the Z47 MD and Fleet line for severe-duty commercial use, with a carbon-fiber reinforced semi-metallic formula and mechanically attached friction material for added durability. Premium stainless-steel hardware is included, and the pad surfaces are scorched to support initial break-in.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47 MD and Fleet brake pads are built for medium-duty and last-mile vehicles that run at or near full GVW on a daily basis. The semi-metallic, carbon-fiber reinforced friction compound is engineered for durable stopping performance, while the friction material is mechanically attached to the backing plate for added shear resistance. Part number Z47-769 is a practical upgrade for fleet brake service where uptime and cost-per-mile matter.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Performance grade pad set for severe-duty fleet use
- Friction is mechanically attached to the backing plate for high shear resistance
- Scorched friction surface for initial bedding support
- Stainless-steel hardware included for brake service completion
- Pad thickness: 24.6 mm inner and 24.6 mm outer
- Part number Z47-769 for catalog and cross-reference lookup
Product Details
The Power Stop Z47 MD and Fleet Carbon-Fiber Semi-Met Brake Pads with Hardware Kit are designed for demanding commercial braking conditions. The semi-metallic compound balances stopping performance and durability, and the carbon-fiber content helps strengthen the pad material for repeated heavy-load operation. This makes Z47-769 a strong choice for fleet maintenance programs that service vehicles operating at full GVW on a regular schedule. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With fleet brake service applications where consistent pedal feel, reduced downtime, and dependable wear characteristics are priorities. Search terms such as medium duty brake pads, last mile fleet brake pads, and PowerStop Z47-769 brake pad set are commonly used by buyers looking for this type of replacement.
What It Helps Address
- Brake fade during repeated heavy-duty stops
- Premature pad wear in full-GVW fleet operation
- Shear-related friction separation concerns
- Extended service intervals caused by lower-durability pad compounds
- Brake job delays from missing service hardware
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and hub contact surfaces, then follow the vehicle manufacturer’s bedding procedure after installation. The pads are not slotted, do not include shims, and do not include a pad wear sensor or brake lubricant. Confirm the application by matching part number Z47-769 to the vehicle’s brake configuration before service.
Quality Assurance
PowerStop positions the Z47 MD and Fleet line for severe-duty commercial use, with a carbon-fiber reinforced semi-metallic formula and mechanically attached friction material for added durability. Premium stainless-steel hardware is included, and the pad surfaces are scorched to support initial break-in.
