PowerStop Z47-784 Disc Brake Pad Set - Front
PowerStop Z47 Front Brake Pads
The PowerStop Z47-784 front disc brake pad set is built for medium-duty and fleet vehicles that spend long days carrying full GVW. Its semi-metallic, carbon-fiber-infused friction formula is aimed at consistent stopping performance, reduced downtime, and lower cost per mile on demanding routes.
Compatible With Chevrolet Express 2500 and 3500, GMC Savana 2500 and 3500, Silverado HD and Sierra HD trucks, plus select Cadillac, Hummer, and heavy-duty SUV applications, this front pad set is a direct-fit service part for severe-duty use. The Z47-784 part number is also a practical match for fleet maintenance planning across multiple platforms.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement for heavy-duty braking performance
- Mechanical pad wear sensor included
- Slotted pad design for stable braking feel
- Friction surface scorched for quicker bedding
- Pad shims included for added fitment support
- Premium stainless-steel hardware included
- Friction is mechanically attached to the backing plate for high shear resistance
- Front position application
Product Line Details
Power Stop’s Z47 MD and Fleet line is aimed at severe-duty service where vehicles operate near maximum load on a daily basis. The carbon-fiber semi-metallic compound is selected to strengthen the pad material and support longer service intervals in medium-duty and last-mile fleet use. The Z47-784 follows that approach with a front brake pad design focused on durability and repeatable stopping performance.
Detailed Description
PowerStop Z47-784 front brake pads are engineered for vehicles that need dependable braking under load, including Chevrolet Silverado 2500 HD, GMC Sierra 2500 HD, Chevrolet Express 3500, and similar heavy-duty platforms. The semi-metallic compound is reinforced with carbon fiber to help the pads handle frequent stops, higher vehicle weight, and daily fleet operation. With a scorched friction surface, slotted design, and mechanically attached friction material, this set is built for controlled braking and strong backing-plate retention.
This part cross-references 15886469 and 18026219 for the same application.
What It Helps Address
- Brake fade during repeated stops with a loaded vehicle
- Premature pad wear in fleet and commercial service
- Reduced braking consistency on heavy-duty trucks and vans
- Brake job delays caused by missing pad hardware
- Wear-sensor service needs on supported applications
Installation Notes and Tips
Install on the front axle only and verify rotor condition before assembly. Clean the caliper bracket and contact points, then use the included stainless-steel hardware and shims during service. Because brake lubricant is not included, apply approved brake lubricant to the appropriate contact areas during installation. Confirm fitment by year, make, model, and front position before ordering.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use, with a carbon-fiber semi-metallic compound and mechanically attached friction material for added shear resistance. The pad set includes a mechanical wear sensor, scorched friction surface, shims, and stainless-steel hardware to support a complete front brake service.
PowerStop Z47-784 Disc Brake Pad Set - Front
PowerStop Z47 Front Brake Pads
The PowerStop Z47-784 front disc brake pad set is built for medium-duty and fleet vehicles that spend long days carrying full GVW. Its semi-metallic, carbon-fiber-infused friction formula is aimed at consistent stopping performance, reduced downtime, and lower cost per mile on demanding routes.
Compatible With Chevrolet Express 2500 and 3500, GMC Savana 2500 and 3500, Silverado HD and Sierra HD trucks, plus select Cadillac, Hummer, and heavy-duty SUV applications, this front pad set is a direct-fit service part for severe-duty use. The Z47-784 part number is also a practical match for fleet maintenance planning across multiple platforms.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement for heavy-duty braking performance
- Mechanical pad wear sensor included
- Slotted pad design for stable braking feel
- Friction surface scorched for quicker bedding
- Pad shims included for added fitment support
- Premium stainless-steel hardware included
- Friction is mechanically attached to the backing plate for high shear resistance
- Front position application
Product Line Details
Power Stop’s Z47 MD and Fleet line is aimed at severe-duty service where vehicles operate near maximum load on a daily basis. The carbon-fiber semi-metallic compound is selected to strengthen the pad material and support longer service intervals in medium-duty and last-mile fleet use. The Z47-784 follows that approach with a front brake pad design focused on durability and repeatable stopping performance.
Detailed Description
PowerStop Z47-784 front brake pads are engineered for vehicles that need dependable braking under load, including Chevrolet Silverado 2500 HD, GMC Sierra 2500 HD, Chevrolet Express 3500, and similar heavy-duty platforms. The semi-metallic compound is reinforced with carbon fiber to help the pads handle frequent stops, higher vehicle weight, and daily fleet operation. With a scorched friction surface, slotted design, and mechanically attached friction material, this set is built for controlled braking and strong backing-plate retention.
This part cross-references 15886469 and 18026219 for the same application.
What It Helps Address
- Brake fade during repeated stops with a loaded vehicle
- Premature pad wear in fleet and commercial service
- Reduced braking consistency on heavy-duty trucks and vans
- Brake job delays caused by missing pad hardware
- Wear-sensor service needs on supported applications
Installation Notes and Tips
Install on the front axle only and verify rotor condition before assembly. Clean the caliper bracket and contact points, then use the included stainless-steel hardware and shims during service. Because brake lubricant is not included, apply approved brake lubricant to the appropriate contact areas during installation. Confirm fitment by year, make, model, and front position before ordering.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use, with a carbon-fiber semi-metallic compound and mechanically attached friction material for added shear resistance. The pad set includes a mechanical wear sensor, scorched friction surface, shims, and stainless-steel hardware to support a complete front brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z47 Front Brake Pads
The PowerStop Z47-784 front disc brake pad set is built for medium-duty and fleet vehicles that spend long days carrying full GVW. Its semi-metallic, carbon-fiber-infused friction formula is aimed at consistent stopping performance, reduced downtime, and lower cost per mile on demanding routes.
Compatible With Chevrolet Express 2500 and 3500, GMC Savana 2500 and 3500, Silverado HD and Sierra HD trucks, plus select Cadillac, Hummer, and heavy-duty SUV applications, this front pad set is a direct-fit service part for severe-duty use. The Z47-784 part number is also a practical match for fleet maintenance planning across multiple platforms.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement for heavy-duty braking performance
- Mechanical pad wear sensor included
- Slotted pad design for stable braking feel
- Friction surface scorched for quicker bedding
- Pad shims included for added fitment support
- Premium stainless-steel hardware included
- Friction is mechanically attached to the backing plate for high shear resistance
- Front position application
Product Line Details
Power Stop’s Z47 MD and Fleet line is aimed at severe-duty service where vehicles operate near maximum load on a daily basis. The carbon-fiber semi-metallic compound is selected to strengthen the pad material and support longer service intervals in medium-duty and last-mile fleet use. The Z47-784 follows that approach with a front brake pad design focused on durability and repeatable stopping performance.
Detailed Description
PowerStop Z47-784 front brake pads are engineered for vehicles that need dependable braking under load, including Chevrolet Silverado 2500 HD, GMC Sierra 2500 HD, Chevrolet Express 3500, and similar heavy-duty platforms. The semi-metallic compound is reinforced with carbon fiber to help the pads handle frequent stops, higher vehicle weight, and daily fleet operation. With a scorched friction surface, slotted design, and mechanically attached friction material, this set is built for controlled braking and strong backing-plate retention.
This part cross-references 15886469 and 18026219 for the same application.
What It Helps Address
- Brake fade during repeated stops with a loaded vehicle
- Premature pad wear in fleet and commercial service
- Reduced braking consistency on heavy-duty trucks and vans
- Brake job delays caused by missing pad hardware
- Wear-sensor service needs on supported applications
Installation Notes and Tips
Install on the front axle only and verify rotor condition before assembly. Clean the caliper bracket and contact points, then use the included stainless-steel hardware and shims during service. Because brake lubricant is not included, apply approved brake lubricant to the appropriate contact areas during installation. Confirm fitment by year, make, model, and front position before ordering.
Quality Assurance
PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use, with a carbon-fiber semi-metallic compound and mechanically attached friction material for added shear resistance. The pad set includes a mechanical wear sensor, scorched friction surface, shims, and stainless-steel hardware to support a complete front brake service.
