PowerStop Z47-825 Disc Brake Pad Set - Front
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-825 front brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced formula is made for severe-duty stopping performance, reduced downtime, and lower cost-per-mile in demanding service.
Compatible With fleet applications that need consistent front brake performance, including Ford F-250 and Ford F-350 duty cycles where heavy loads and frequent stops are part of the job. The Z47-825 part number is also cross-referenced to Centric Parts 106.08250 and Wagner Brake SX825 for the same application.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for medium-duty and fleet use
- Mechanical pad wear sensor included
- Slotted pad design
- Friction surface scorched for initial bedding support
- Pad shims included
- Premium stainless-steel hardware included
- Friction mechanically attached to the backing plate for high shear resistance
- Outer and inner pad thickness: 19.9 mm
Built for Fleet Brake Demands
The Power Stop Z47 MD and Fleet line focuses on uptime and durability for vehicles that spend long hours in service and regularly carry heavy loads. This Z47-825 front pad set uses a semi-metallic compound infused with carbon fiber to strengthen the friction material and maintain dependable braking under repeated stops. For buyers searching for front brake pads for Ford F-250 and Ford F-350 fleet service, this part delivers a performance-oriented replacement option for severe-duty use.
What It Helps Address
- Brake fade during repeated stop-and-go driving
- Premature pad wear in heavy-load service
- Reduced braking consistency on fleet vehicles
- Extended downtime from frequent brake service
- Shear stress at the friction-to-backing-plate interface
Installation Notes
Verify axle position and vehicle application before ordering. This front disc brake pad set includes stainless-steel hardware, pad shims, and a mechanical wear sensor, which helps streamline a brake service when replacing worn front pads. Follow the vehicle manufacturer’s bedding procedure after installation to establish proper pad transfer on the rotor surface.
Quality Assurance
PowerStop designs the Z47 MD and Fleet series for severe-duty fleet braking needs, with a mechanically attached friction layer and performance-grade materials selected for demanding daily operation. The Z47-825 is engineered as an upgrade over stock-style brake pads for medium-duty service where consistent stopping power matters.
PowerStop Z47-825 Disc Brake Pad Set - Front
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-825 front brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced formula is made for severe-duty stopping performance, reduced downtime, and lower cost-per-mile in demanding service.
Compatible With fleet applications that need consistent front brake performance, including Ford F-250 and Ford F-350 duty cycles where heavy loads and frequent stops are part of the job. The Z47-825 part number is also cross-referenced to Centric Parts 106.08250 and Wagner Brake SX825 for the same application.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for medium-duty and fleet use
- Mechanical pad wear sensor included
- Slotted pad design
- Friction surface scorched for initial bedding support
- Pad shims included
- Premium stainless-steel hardware included
- Friction mechanically attached to the backing plate for high shear resistance
- Outer and inner pad thickness: 19.9 mm
Built for Fleet Brake Demands
The Power Stop Z47 MD and Fleet line focuses on uptime and durability for vehicles that spend long hours in service and regularly carry heavy loads. This Z47-825 front pad set uses a semi-metallic compound infused with carbon fiber to strengthen the friction material and maintain dependable braking under repeated stops. For buyers searching for front brake pads for Ford F-250 and Ford F-350 fleet service, this part delivers a performance-oriented replacement option for severe-duty use.
What It Helps Address
- Brake fade during repeated stop-and-go driving
- Premature pad wear in heavy-load service
- Reduced braking consistency on fleet vehicles
- Extended downtime from frequent brake service
- Shear stress at the friction-to-backing-plate interface
Installation Notes
Verify axle position and vehicle application before ordering. This front disc brake pad set includes stainless-steel hardware, pad shims, and a mechanical wear sensor, which helps streamline a brake service when replacing worn front pads. Follow the vehicle manufacturer’s bedding procedure after installation to establish proper pad transfer on the rotor surface.
Quality Assurance
PowerStop designs the Z47 MD and Fleet series for severe-duty fleet braking needs, with a mechanically attached friction layer and performance-grade materials selected for demanding daily operation. The Z47-825 is engineered as an upgrade over stock-style brake pads for medium-duty service where consistent stopping power matters.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerStop Z47 MD and Fleet Brake Pads
PowerStop Z47-825 front brake pads are built for medium-duty and last-mile fleet vehicles that operate at full GVW on a daily basis. This semi-metallic, carbon-fiber reinforced formula is made for severe-duty stopping performance, reduced downtime, and lower cost-per-mile in demanding service.
Compatible With fleet applications that need consistent front brake performance, including Ford F-250 and Ford F-350 duty cycles where heavy loads and frequent stops are part of the job. The Z47-825 part number is also cross-referenced to Centric Parts 106.08250 and Wagner Brake SX825 for the same application.
Key Features
- Semi-metallic friction material with carbon-fiber reinforcement
- Front disc brake pad set for medium-duty and fleet use
- Mechanical pad wear sensor included
- Slotted pad design
- Friction surface scorched for initial bedding support
- Pad shims included
- Premium stainless-steel hardware included
- Friction mechanically attached to the backing plate for high shear resistance
- Outer and inner pad thickness: 19.9 mm
Built for Fleet Brake Demands
The Power Stop Z47 MD and Fleet line focuses on uptime and durability for vehicles that spend long hours in service and regularly carry heavy loads. This Z47-825 front pad set uses a semi-metallic compound infused with carbon fiber to strengthen the friction material and maintain dependable braking under repeated stops. For buyers searching for front brake pads for Ford F-250 and Ford F-350 fleet service, this part delivers a performance-oriented replacement option for severe-duty use.
What It Helps Address
- Brake fade during repeated stop-and-go driving
- Premature pad wear in heavy-load service
- Reduced braking consistency on fleet vehicles
- Extended downtime from frequent brake service
- Shear stress at the friction-to-backing-plate interface
Installation Notes
Verify axle position and vehicle application before ordering. This front disc brake pad set includes stainless-steel hardware, pad shims, and a mechanical wear sensor, which helps streamline a brake service when replacing worn front pads. Follow the vehicle manufacturer’s bedding procedure after installation to establish proper pad transfer on the rotor surface.
Quality Assurance
PowerStop designs the Z47 MD and Fleet series for severe-duty fleet braking needs, with a mechanically attached friction layer and performance-grade materials selected for demanding daily operation. The Z47-825 is engineered as an upgrade over stock-style brake pads for medium-duty service where consistent stopping power matters.
