🎉 Up to 70% Off Selected ItemsShop Sale
Premium Guard PG4476EX Engine Oil Filter
HomeStore

Premium Guard PG4476EX Engine Oil Filter

Premium Guard PG4476EX Engine Oil Filter

Premium Guard PG4476EX Extended Life Oil Filter

Premium Guard PG4476EX is an Extended Life spin-on engine oil filter built for a wide range of Toyota, Lexus, and select Suzuki applications. It uses synthetic blend media, a silicone gasket, and an anti-drain back valve to support clean oil flow and reliable start-up protection.

Key Features

  • Synthetic blend filter media with a 25 micron rating
  • Spin-on design with 3/4-16 UNF inside thread size
  • Anti-drain back valve helps retain oil in the filter after shutdown
  • Bypass relief valve set at 14-17 psi
  • Flow rate of 7.93 and burst pressure rating of 310
  • Silicone gasket with 0.18 thickness for sealing consistency
  • Height: 3.05 in; outer diameter bottom: 2.55 in

Detailed Description

The Premium Guard PG4476EX oil filter is engineered for extended-life service intervals and direct replacement use on many late-model Toyota and Lexus engines, including popular applications such as Toyota Camry, Corolla, RAV4, Highlander, Prius, Tacoma, Tundra, and Lexus RX350, NX350, and GX550. The synthetic blend media is designed to capture fine contaminants while maintaining steady oil flow, and the silicone gasket supports a dependable seal under operating heat. This part cross-references Wix WL10332 for the same application.

Use PG4476EX when you need a spin-on engine oil filter that matches the listed dimensions and valve settings for the vehicle application. The extended life design makes it a practical choice for drivers maintaining Toyota and Lexus models that call for this filter style, including many hybrid and non-hybrid platforms.

What This Oil Filter Helps Address

  • Oil contamination from normal engine wear
  • Cold-start oil drain-back after the engine is shut off
  • Pressure control issues related to filter bypass operation
  • Seal leakage at the filter gasket surface
  • Restricted oil flow caused by a loaded filter element

Installation Notes and Tips

Verify the filter thread size, gasket diameter, height, and mounting clearance before installation. Pre-lubricate the gasket, tighten to the vehicle manufacturer’s specification, and confirm the filter seats evenly on the mounting surface. For fitment, this part covers applications such as Fits 2024-2026 Lexus GX550, N/A; Fits 2022-2026 Lexus LX600, N/A; Fits 2023-2026 Toyota RAV4, N/A; Fits 2024-2026 Toyota Tacoma, N/A; and Fits 2018-2026 Toyota Camry, N/A.

Quality Assurance

Premium Guard Extended Life filters are built with synthetic blend media, a silicone gasket, and valve components specified for the listed application requirements. Part number PG4476EX is identified for direct replacement use where the fitment data matches the vehicle.

$12.83
Premium Guard PG4476EX Engine Oil Filter
$12.83

Premium Guard PG4476EX Engine Oil Filter

Premium Guard PG4476EX Extended Life Oil Filter

Premium Guard PG4476EX is an Extended Life spin-on engine oil filter built for a wide range of Toyota, Lexus, and select Suzuki applications. It uses synthetic blend media, a silicone gasket, and an anti-drain back valve to support clean oil flow and reliable start-up protection.

Key Features

  • Synthetic blend filter media with a 25 micron rating
  • Spin-on design with 3/4-16 UNF inside thread size
  • Anti-drain back valve helps retain oil in the filter after shutdown
  • Bypass relief valve set at 14-17 psi
  • Flow rate of 7.93 and burst pressure rating of 310
  • Silicone gasket with 0.18 thickness for sealing consistency
  • Height: 3.05 in; outer diameter bottom: 2.55 in

Detailed Description

The Premium Guard PG4476EX oil filter is engineered for extended-life service intervals and direct replacement use on many late-model Toyota and Lexus engines, including popular applications such as Toyota Camry, Corolla, RAV4, Highlander, Prius, Tacoma, Tundra, and Lexus RX350, NX350, and GX550. The synthetic blend media is designed to capture fine contaminants while maintaining steady oil flow, and the silicone gasket supports a dependable seal under operating heat. This part cross-references Wix WL10332 for the same application.

Use PG4476EX when you need a spin-on engine oil filter that matches the listed dimensions and valve settings for the vehicle application. The extended life design makes it a practical choice for drivers maintaining Toyota and Lexus models that call for this filter style, including many hybrid and non-hybrid platforms.

What This Oil Filter Helps Address

  • Oil contamination from normal engine wear
  • Cold-start oil drain-back after the engine is shut off
  • Pressure control issues related to filter bypass operation
  • Seal leakage at the filter gasket surface
  • Restricted oil flow caused by a loaded filter element

Installation Notes and Tips

Verify the filter thread size, gasket diameter, height, and mounting clearance before installation. Pre-lubricate the gasket, tighten to the vehicle manufacturer’s specification, and confirm the filter seats evenly on the mounting surface. For fitment, this part covers applications such as Fits 2024-2026 Lexus GX550, N/A; Fits 2022-2026 Lexus LX600, N/A; Fits 2023-2026 Toyota RAV4, N/A; Fits 2024-2026 Toyota Tacoma, N/A; and Fits 2018-2026 Toyota Camry, N/A.

Quality Assurance

Premium Guard Extended Life filters are built with synthetic blend media, a silicone gasket, and valve components specified for the listed application requirements. Part number PG4476EX is identified for direct replacement use where the fitment data matches the vehicle.

Product Information

Shipping & Returns

Description

Premium Guard PG4476EX Extended Life Oil Filter

Premium Guard PG4476EX is an Extended Life spin-on engine oil filter built for a wide range of Toyota, Lexus, and select Suzuki applications. It uses synthetic blend media, a silicone gasket, and an anti-drain back valve to support clean oil flow and reliable start-up protection.

Key Features

  • Synthetic blend filter media with a 25 micron rating
  • Spin-on design with 3/4-16 UNF inside thread size
  • Anti-drain back valve helps retain oil in the filter after shutdown
  • Bypass relief valve set at 14-17 psi
  • Flow rate of 7.93 and burst pressure rating of 310
  • Silicone gasket with 0.18 thickness for sealing consistency
  • Height: 3.05 in; outer diameter bottom: 2.55 in

Detailed Description

The Premium Guard PG4476EX oil filter is engineered for extended-life service intervals and direct replacement use on many late-model Toyota and Lexus engines, including popular applications such as Toyota Camry, Corolla, RAV4, Highlander, Prius, Tacoma, Tundra, and Lexus RX350, NX350, and GX550. The synthetic blend media is designed to capture fine contaminants while maintaining steady oil flow, and the silicone gasket supports a dependable seal under operating heat. This part cross-references Wix WL10332 for the same application.

Use PG4476EX when you need a spin-on engine oil filter that matches the listed dimensions and valve settings for the vehicle application. The extended life design makes it a practical choice for drivers maintaining Toyota and Lexus models that call for this filter style, including many hybrid and non-hybrid platforms.

What This Oil Filter Helps Address

  • Oil contamination from normal engine wear
  • Cold-start oil drain-back after the engine is shut off
  • Pressure control issues related to filter bypass operation
  • Seal leakage at the filter gasket surface
  • Restricted oil flow caused by a loaded filter element

Installation Notes and Tips

Verify the filter thread size, gasket diameter, height, and mounting clearance before installation. Pre-lubricate the gasket, tighten to the vehicle manufacturer’s specification, and confirm the filter seats evenly on the mounting surface. For fitment, this part covers applications such as Fits 2024-2026 Lexus GX550, N/A; Fits 2022-2026 Lexus LX600, N/A; Fits 2023-2026 Toyota RAV4, N/A; Fits 2024-2026 Toyota Tacoma, N/A; and Fits 2018-2026 Toyota Camry, N/A.

Quality Assurance

Premium Guard Extended Life filters are built with synthetic blend media, a silicone gasket, and valve components specified for the listed application requirements. Part number PG4476EX is identified for direct replacement use where the fitment data matches the vehicle.

Premium Guard PG4476EX Engine Oil Filter | PartCatalog