SKP SK659140 Drive Shaft - Front
Front Drive Shaft for Jeep Cherokee and Comanche
Replace a worn or damaged front driveline component with this SKP drive shaft, part number SK659140. It is built from steel with a standard-grade design and an adjustable overall length to match the specified front driveline application on select Jeep models.
Compatible with 1989-2001 Jeep Cherokee front applications, plus 1987-1992 Jeep Comanche front and 1987 Jeep Wagoneer front applications. This SK659140 drive shaft is a direct-fit replacement for vehicles that require a front shaft length of 26.54 to 29.21 inches and a shaft diameter of 1.61/2.01 inches.
Key Features
- Steel shaft construction for driveline service
- Overall length adjustable for application-specific fitment
- Standard grade type
- New replacement part
- Front position application
- Cross-references OE numbers 53005543 and 53005543AC for the same application
Detailed Product Information
SKP SK659140 is a front drive shaft engineered for Jeep Cherokee, Jeep Comanche, and Jeep Wagoneer applications listed in the fitment data. The steel shaft material and adjustable overall length help match the original driveline dimensions required for these vehicles, while the standard-grade construction supports routine replacement needs. For buyers searching for a Jeep Cherokee front drive shaft, Jeep Comanche front drive shaft, or Jeep Wagoneer front driveline replacement, this part number provides a focused fitment match.
Use SK659140 when the vehicle calls for a front shaft length between 26.54 and 29.21 inches and a shaft diameter of 1.61/2.01 inches. The part number SK659140 is also useful when cross-checking OE-style replacement references during driveline repair or restoration work.
What This Part Helps Address
- Vibration from a worn or out-of-balance front drive shaft
- Clunking or driveline noise during acceleration or deceleration
- Loss of smooth power transfer to the front axle
- Damage from corrosion, wear, or impact on the original shaft
- Fitment issues when replacing a front shaft with the correct length and diameter
Installation Notes and Tips
Confirm the vehicle’s front driveline measurements before installation, including shaft length and diameter, to verify match-up with SK659140. Inspect related driveline components, mounting points, and surrounding hardware for wear before installing the replacement shaft. Because this is a front drive shaft application, proper alignment and measurement are important for smooth operation after installation.
Quality Assurance
This SKP replacement drive shaft is supplied new and built to standard-grade specifications for the listed Jeep applications. It cross-references OE numbers 53005543 and 53005543AC for the same application.
Fitment
- Fits 1989-2001 Jeep Cherokee, front. Notes: Drive Shaft Length (In):26.54~29.21; Drive Shaft Diameter (In):1.61/2.01; Drive Shaft Material:steel; Grade Type:standard; Product Condition: new
- Fits 1987-1992 Jeep Comanche, front.
- Fits 1987 Jeep Wagoneer, front.
SKP SK659140 Drive Shaft - Front
Front Drive Shaft for Jeep Cherokee and Comanche
Replace a worn or damaged front driveline component with this SKP drive shaft, part number SK659140. It is built from steel with a standard-grade design and an adjustable overall length to match the specified front driveline application on select Jeep models.
Compatible with 1989-2001 Jeep Cherokee front applications, plus 1987-1992 Jeep Comanche front and 1987 Jeep Wagoneer front applications. This SK659140 drive shaft is a direct-fit replacement for vehicles that require a front shaft length of 26.54 to 29.21 inches and a shaft diameter of 1.61/2.01 inches.
Key Features
- Steel shaft construction for driveline service
- Overall length adjustable for application-specific fitment
- Standard grade type
- New replacement part
- Front position application
- Cross-references OE numbers 53005543 and 53005543AC for the same application
Detailed Product Information
SKP SK659140 is a front drive shaft engineered for Jeep Cherokee, Jeep Comanche, and Jeep Wagoneer applications listed in the fitment data. The steel shaft material and adjustable overall length help match the original driveline dimensions required for these vehicles, while the standard-grade construction supports routine replacement needs. For buyers searching for a Jeep Cherokee front drive shaft, Jeep Comanche front drive shaft, or Jeep Wagoneer front driveline replacement, this part number provides a focused fitment match.
Use SK659140 when the vehicle calls for a front shaft length between 26.54 and 29.21 inches and a shaft diameter of 1.61/2.01 inches. The part number SK659140 is also useful when cross-checking OE-style replacement references during driveline repair or restoration work.
What This Part Helps Address
- Vibration from a worn or out-of-balance front drive shaft
- Clunking or driveline noise during acceleration or deceleration
- Loss of smooth power transfer to the front axle
- Damage from corrosion, wear, or impact on the original shaft
- Fitment issues when replacing a front shaft with the correct length and diameter
Installation Notes and Tips
Confirm the vehicle’s front driveline measurements before installation, including shaft length and diameter, to verify match-up with SK659140. Inspect related driveline components, mounting points, and surrounding hardware for wear before installing the replacement shaft. Because this is a front drive shaft application, proper alignment and measurement are important for smooth operation after installation.
Quality Assurance
This SKP replacement drive shaft is supplied new and built to standard-grade specifications for the listed Jeep applications. It cross-references OE numbers 53005543 and 53005543AC for the same application.
Fitment
- Fits 1989-2001 Jeep Cherokee, front. Notes: Drive Shaft Length (In):26.54~29.21; Drive Shaft Diameter (In):1.61/2.01; Drive Shaft Material:steel; Grade Type:standard; Product Condition: new
- Fits 1987-1992 Jeep Comanche, front.
- Fits 1987 Jeep Wagoneer, front.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Drive Shaft for Jeep Cherokee and Comanche
Replace a worn or damaged front driveline component with this SKP drive shaft, part number SK659140. It is built from steel with a standard-grade design and an adjustable overall length to match the specified front driveline application on select Jeep models.
Compatible with 1989-2001 Jeep Cherokee front applications, plus 1987-1992 Jeep Comanche front and 1987 Jeep Wagoneer front applications. This SK659140 drive shaft is a direct-fit replacement for vehicles that require a front shaft length of 26.54 to 29.21 inches and a shaft diameter of 1.61/2.01 inches.
Key Features
- Steel shaft construction for driveline service
- Overall length adjustable for application-specific fitment
- Standard grade type
- New replacement part
- Front position application
- Cross-references OE numbers 53005543 and 53005543AC for the same application
Detailed Product Information
SKP SK659140 is a front drive shaft engineered for Jeep Cherokee, Jeep Comanche, and Jeep Wagoneer applications listed in the fitment data. The steel shaft material and adjustable overall length help match the original driveline dimensions required for these vehicles, while the standard-grade construction supports routine replacement needs. For buyers searching for a Jeep Cherokee front drive shaft, Jeep Comanche front drive shaft, or Jeep Wagoneer front driveline replacement, this part number provides a focused fitment match.
Use SK659140 when the vehicle calls for a front shaft length between 26.54 and 29.21 inches and a shaft diameter of 1.61/2.01 inches. The part number SK659140 is also useful when cross-checking OE-style replacement references during driveline repair or restoration work.
What This Part Helps Address
- Vibration from a worn or out-of-balance front drive shaft
- Clunking or driveline noise during acceleration or deceleration
- Loss of smooth power transfer to the front axle
- Damage from corrosion, wear, or impact on the original shaft
- Fitment issues when replacing a front shaft with the correct length and diameter
Installation Notes and Tips
Confirm the vehicle’s front driveline measurements before installation, including shaft length and diameter, to verify match-up with SK659140. Inspect related driveline components, mounting points, and surrounding hardware for wear before installing the replacement shaft. Because this is a front drive shaft application, proper alignment and measurement are important for smooth operation after installation.
Quality Assurance
This SKP replacement drive shaft is supplied new and built to standard-grade specifications for the listed Jeep applications. It cross-references OE numbers 53005543 and 53005543AC for the same application.
Fitment
- Fits 1989-2001 Jeep Cherokee, front. Notes: Drive Shaft Length (In):26.54~29.21; Drive Shaft Diameter (In):1.61/2.01; Drive Shaft Material:steel; Grade Type:standard; Product Condition: new
- Fits 1987-1992 Jeep Comanche, front.
- Fits 1987 Jeep Wagoneer, front.
